Abstract:During the loss-of-water accident in the nuclear reactor, the high-temperature steam can react with the Zr alloy cladding tube and lead to oxidation of the Zr alloys, which leads to the embrittlement and fracture of the cladding tube. The process is closely related to the microstructural evolution of the Zr alloys. In order to reveal the embrittlement mechanisms of the Zr-Sn-Nb cladding tube, the steam oxidation experiments of Zr-Sn-Nb alloy at 1000 similar to 1250 degrees C were performed. The microstructure was investigated by optical microscope, scanning electron microscope and transmission electron microscope. The hydrogen content was identified by oxygen, nitrogen and hydrogen analyzer. The results show that the Zr-Sn-Nb alloy can be oxidized into three layers, including ZrO2, alpha-Zr(O) and Prior-beta. The thicknesses of ZrO2 layer and alpha-Zr(O) layer increase with increasing oxidation time, meanwhile, the number of cracks increases in alpha-Zr(O) layer. The lath beta-Zr phase of the Prior-beta layer is transformed into sheet-like alpha-Zr phase and grain width of alpha-Zr phase becomes larger when the alloy is exposed to longer steam oxidation time. Loose ZrO2 layer with a large number of transverse cracks can be formed in 1000 degrees C steam, while dense ZrO2 layer can be observed at higher temperatures. H content of the Zr-Sn-Nb alloy matrix increases with the oxidation time. The hydrogen pickup of the Zr-Sn-Nb alloy matrix is much higher at 1000 degrees C steam than those at other temperatures. The orientation relationship between the alpha-Zr matrix and the hydride is (0002)(alpha-Zr)//((2) over bar0 (2) over bar)(delta-ZrH1.66) and [2 (1) over bar(1) over bar0]alpha-Zr//[011](delta-ZrH1.66) in 1000 degrees C steam, and (0002)(alpha-Zr)//(2 (2) over bar0)(delta-ZrH1.66) and [0110](alpha-Zr)//[111](delta-ZrH1.66) in 1200 degrees C steam.

Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles

Oxidation of Typical Zr-1nb Alloy in High-Temperature Air under 700–900 °C

High-temperature Corrosion of Zr–Nb Alloy for Nuclear Structural Materials

High-temperature oxidation of Zr 1Nb zirconium alloy with protective Cr/Mo coating

Early-stage Diffusion and Oxidation Behavior of Cr-Nb Coated Zr Alloy Accident Tolerant Fuel Cladding Materials at 1200°C - 1500°C

Microstructure of Zr-Sn-Nb Alloy After 1000 similar to 1250 degrees C Steam Oxidation

Nb speciation and microstructural characterization of the oxide layer formed on neutron-irradiated Zr-2.5 Nb alloy in high-temperature water

High-Temperature Steam Oxidation of Accident-Tolerant Cr/Mo-Coated Zr Alloy at 1200–1400 °C

Effect of Diffusion Barriers on Steam Oxidation Properties and Interface Evolutions of Cr Coating for Zirconium Alloy at 1200 °C

Oxide characteristics of 90Nb-10Zr alloy corroded under different water chemistry conditions

Reassessment of Oxidation-Induced Amorphization and Dissolution of Nb Precipitates in Zr−Nb Nuclear Fuel Cladding Tubes

Tailored high-temperature corrosion behavior of Cr coatings using high power impulse magnetron sputtering on ZIRLO alloys for accident-tolerant fuel application

Tem Characterizations of a Zro2/Cr Composite Coating on Zr-1nb Alloy after 1200°C Steam Oxidation

Oxidation behavior of Zr-2.5Nb alloy exposed to steam in the temperature range of 600-1200°C

Corrosion Behavior of Second Phase Alloys of Beta-(Nb, Zr) in Deionized Water at 360 Degrees C

Influence of ions irradiation on the microstructural evolution, mechanical and tribological properties of Zr-4 alloy

Study of the irradiation induced microstructural change in zr excel alloy with in situ heavy ion irradiation

Isothermal Experiments on Steam Oxidation of Zr−Sn−Nb Alloy at 1050 °C: Kinetics and Process

Radiation Damage in He Irradiated Nanolayered Zr/Nb at Different Temperatures

CHANGES IN ADHESION OF CrN COATINGS ON Zr-1%Nb ALLOY SUBSTRATES PRELIMINARY IRRADIATED WITH HIGH-INTENSE PULSED ION BEAMS

Effect of Impurity and Alloying Elements on the High-Temperature Oxidation Resistance of a E110 Zirconium Alloy