Abstract:In 2011, the Great East Japan Earthquake and tsunami caused a hydrogen explosion at the Fukushima Daiichi nuclear power plant, which exposed radioactive materials to the atmosphere and had a very negative impact on the nuclear power industry. Since then, efforts have intensified around the world to make nuclear power safer. Accident-tolerant fuel (ATF) is being developed to prevent the rapid oxidation of zirconium cladding, which directly causes hydrogen explosions. ATF research can be divided into two main approaches: changing the cladding material, or coating the surface of the cladding. Coatings are easier to commercialize and apply to existing nuclear power plants, so most vendors have focused on this approach. Chromium is a popular coating medium because of its superior properties such as a low oxidation rate and excellent adhesion. Therefore, research has been focused on suppressing the rapid oxidation of zirconium cladding in the event of an accident by adding a chromium coating with an appropriate thickness in terms of both economy and effectiveness. Even if the thickness of the coating is fixed, the penetration of oxidizing substances can be further delayed by improving the microstructure of the chromium coating, such as by reducing the grain boundary area. In this study, chromium-coated zirconium cladding tubes were fabricated by the arc ion plating process. The microstructure of the chromium coating was adjusted by varying the negative voltage (0–125 V), which in turn controlled the incident energy at which the chromium ionic particles hit the surface of the cladding tube. Experiments were then performed in 1200 °C steam environment to determine the optimal microstructure for high-temperature oxidation resistance. The development of various material degradation phenomena that occurred during 1200 °C steam oxidation was observed to identify the oxidation mechanism and the main factors of the microstructure that affect the zirconium oxidation rate.

Insights into 1200 °C steam oxidation behavior of Cr coatings with different microstructure on Zircaloy-4 alloys for enhanced accident tolerant fuel cladding

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Isothermal experiments on steam oxidation of magnetron-sputtered chromium-coated zirconium alloy cladding at 1200 °C

Investigations on 1200 °C steam oxidation behavior of Cr coatings with distinct crystallographic orientation on Zircaloy-4 alloys

Construction of chromium coatings with (200) preferred orientation and exploration the high-temperature steam oxidation properties

Long‐term high‐temperature steam oxidation behavior of Cr‐coated Zircaloy‐4 alloy for accident tolerant fuel

Investigation on Microstructures and High-Temperature Oxidation Resistance of Cr Coatings on Zircaloy-4 by Multi-Arc Ion Plating Technology

Degradation behavior of chromium-coated zirconium cladding under 1200 oC steam oxidation according to the coating microstructure

Systematic investigations on the oxidation mechanism of Cr coated Zr-4 alloy under different high-temperature steam conditions

Investigation of oxidation behaviors of coated Zircaloy as accident-tolerant fuel with CrAlN and CrAlSiN coatings in high-temperature steam

Development of cold spray chromium coatings for improved accident tolerant zirconium-alloy cladding

Steam oxidation of Cr-coated zirconium alloy claddings at 1200 °C: Kinetics transition and failure mechanism of Cr coatings

Microstructure evolution and oxidation behavior of bi-layer CrAl-Mo coated Zircaloy-4 in steam at 1200 o C and 1300 o C

The high-temperature oxidation and mechanical properties of the Cr/Zr and CrN/Zr coating

Oxidation Behavior and Kinetics of Magnetron-sputtered Cr-coated Zr Alloy Cladding in 1000~1300°C Steam Environment

High-temperature steam oxidation behavior and failure mechanisms of Al alloyed Cr coatings on Zr-4 alloy

Tem Characterizations of a Zro2/Cr Composite Coating on Zr-1nb Alloy after 1200°C Steam Oxidation

Mechanical and high-temperature steam oxidation properties of Cr coatings deposited via high-power impulse magnetron sputtering

Tailored high-temperature corrosion behavior of Cr coatings using high power impulse magnetron sputtering on ZIRLO alloys for accident-tolerant fuel application

Improvement of the high-temperature steam oxidation resistance of Zirlo tubes by multilayer Cr/CrAlSiN coatings

Evolution of Cr/Cr2O3 interface in Cr-coated zirconium alloy in high temperature steam