Abstract:In 2011, the Great East Japan Earthquake and tsunami caused a hydrogen explosion at the Fukushima Daiichi nuclear power plant, which exposed radioactive materials to the atmosphere and had a very negative impact on the nuclear power industry. Since then, efforts have intensified around the world to make nuclear power safer. Accident-tolerant fuel (ATF) is being developed to prevent the rapid oxidation of zirconium cladding, which directly causes hydrogen explosions. ATF research can be divided into two main approaches: changing the cladding material, or coating the surface of the cladding. Coatings are easier to commercialize and apply to existing nuclear power plants, so most vendors have focused on this approach. Chromium is a popular coating medium because of its superior properties such as a low oxidation rate and excellent adhesion. Therefore, research has been focused on suppressing the rapid oxidation of zirconium cladding in the event of an accident by adding a chromium coating with an appropriate thickness in terms of both economy and effectiveness. Even if the thickness of the coating is fixed, the penetration of oxidizing substances can be further delayed by improving the microstructure of the chromium coating, such as by reducing the grain boundary area. In this study, chromium-coated zirconium cladding tubes were fabricated by the arc ion plating process. The microstructure of the chromium coating was adjusted by varying the negative voltage (0–125 V), which in turn controlled the incident energy at which the chromium ionic particles hit the surface of the cladding tube. Experiments were then performed in 1200 °C steam environment to determine the optimal microstructure for high-temperature oxidation resistance. The development of various material degradation phenomena that occurred during 1200 °C steam oxidation was observed to identify the oxidation mechanism and the main factors of the microstructure that affect the zirconium oxidation rate.

Microstructure of Zr-Sn-Nb Alloy After 1000 similar to 1250 degrees C Steam Oxidation

Effect of Nb and Cu on α/β Phase Transition Temperature and Corrosion Behavior of New Type Zirconium Alloys

Understanding the oxidation resistance of zirconium alloy at 1000 °C based on the formation of a Zr-Sn intermetallic phase and co-precipitation of Sn and Nb

Study on oxidation behaviors of Zr–Sn–Nb alloy in water steam at 1250 °C

Reflood oxidation performances of Cr-coated Zr-Sn-Nb alloy cladding tubes at 1000 °C∼1200 °C

Oxidation behavior of Zr-2.5Nb alloy exposed to steam in the temperature range of 600-1200°C

Tem Characterizations of a Zro2/Cr Composite Coating on Zr-1nb Alloy after 1200°C Steam Oxidation

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Study of Oxidation Behavior and Associated Microstructure Evolution of Zircaloy-4 Exposed to High Temperature Pure Steam

Isothermal Experiments on Steam Oxidation of Zr−Sn−Nb Alloy at 1050 °C: Kinetics and Process

Corrosion Behavior of 90Nb-10Zr Alloy in 500 degrees C Super-Heated Steam

Oxidation of Typical Zr-1nb Alloy in High-Temperature Air under 700–900 °C

Changing Mechanisms of High-Temperature Oxidation of Zr-1%Nb Alloy in Air and Steam by Surface Modification with Charged Particles

Oxidation Behavior and Kinetics of Magnetron-sputtered Cr-coated Zr Alloy Cladding in 1000~1300°C Steam Environment

Corrosion of New Zirconium Claddings in 500 °C/10.3 MPa Steam: Effects of Alloying and Metallography

Temperature-time Dependence and Mechanisms of Redox Reaction in Cr-coated Zr Alloy Cladding During Steam Oxidation at 900-1250 ℃

Degradation behavior of chromium-coated zirconium cladding under 1200 oC steam oxidation according to the coating microstructure

Self-healing behavior of Cr-coated Zr alloy cladding in high temperature steam oxidation process

Steam Oxidation Of Cr-Coated Sn-Containing Zircaloy Solid Rod At 1000 Degrees C

Isothermal experiments on steam oxidation of magnetron-sputtered chromium-coated zirconium alloy cladding at 1200 °C

Early-stage Diffusion and Oxidation Behavior of Cr-Nb Coated Zr Alloy Accident Tolerant Fuel Cladding Materials at 1200°C - 1500°C