Abstract:In 2011, the Great East Japan Earthquake and tsunami caused a hydrogen explosion at the Fukushima Daiichi nuclear power plant, which exposed radioactive materials to the atmosphere and had a very negative impact on the nuclear power industry. Since then, efforts have intensified around the world to make nuclear power safer. Accident-tolerant fuel (ATF) is being developed to prevent the rapid oxidation of zirconium cladding, which directly causes hydrogen explosions. ATF research can be divided into two main approaches: changing the cladding material, or coating the surface of the cladding. Coatings are easier to commercialize and apply to existing nuclear power plants, so most vendors have focused on this approach. Chromium is a popular coating medium because of its superior properties such as a low oxidation rate and excellent adhesion. Therefore, research has been focused on suppressing the rapid oxidation of zirconium cladding in the event of an accident by adding a chromium coating with an appropriate thickness in terms of both economy and effectiveness. Even if the thickness of the coating is fixed, the penetration of oxidizing substances can be further delayed by improving the microstructure of the chromium coating, such as by reducing the grain boundary area. In this study, chromium-coated zirconium cladding tubes were fabricated by the arc ion plating process. The microstructure of the chromium coating was adjusted by varying the negative voltage (0–125 V), which in turn controlled the incident energy at which the chromium ionic particles hit the surface of the cladding tube. Experiments were then performed in 1200 °C steam environment to determine the optimal microstructure for high-temperature oxidation resistance. The development of various material degradation phenomena that occurred during 1200 °C steam oxidation was observed to identify the oxidation mechanism and the main factors of the microstructure that affect the zirconium oxidation rate.

Reflood oxidation performances of Cr-coated Zr-Sn-Nb alloy cladding tubes at 1000 °C∼1200 °C

Oxidation Behavior and Kinetics of Magnetron-sputtered Cr-coated Zr Alloy Cladding in 1000~1300°C Steam Environment

Isothermal experiments on steam oxidation of magnetron-sputtered chromium-coated zirconium alloy cladding at 1200 °C

Insights into 1200 °C steam oxidation behavior of Cr coatings with different microstructure on Zircaloy-4 alloys for enhanced accident tolerant fuel cladding

Microstructure Evolution and Failure Mechanism of Cr-coated Zry-4 in Air and Steam at 1200 °C

Tem Characterizations of a Zro2/Cr Composite Coating on Zr-1nb Alloy after 1200°C Steam Oxidation

The high-temperature oxidation and mechanical properties of the Cr/Zr and CrN/Zr coating

Steam oxidation of Cr-coated zirconium alloy claddings at 1200 °C: Kinetics transition and failure mechanism of Cr coatings

High temperature oxidation of CrAl-coated Zr–1 Nb alloy in 1000 – 1300 °C steam

Systematic investigations on the oxidation mechanism of Cr coated Zr-4 alloy under different high-temperature steam conditions

Long‐term high‐temperature steam oxidation behavior of Cr‐coated Zircaloy‐4 alloy for accident tolerant fuel

High-Temperature Steam Oxidation of Accident-Tolerant Cr/Mo-Coated Zr Alloy at 1200–1400 °C

Self-healing behavior of Cr-coated Zr alloy cladding in high temperature steam oxidation process

Improved oxidation resistance of Cr/FeCrAl coating on Zr alloy in high-temperature steam environment

Improvement of the high-temperature steam oxidation resistance of Zirlo tubes by multilayer Cr/CrAlSiN coatings

Xe20+ ions irradiation and autoclave corrosion coupled with steam oxidation behaviors of FeCrAlMoSiY-coated Zr claddings

Degradation behavior of chromium-coated zirconium cladding under 1200 oC steam oxidation according to the coating microstructure

The oxidation mechanisms of the Xe20+ ion-irradiated Cr coatings on Zr alloy coupons: Accelerated diffusion and internal oxidation

Degradation of the Cr 2 O 3 layer protectiveness caused by grain refinement during high-temperature oxidation of Cr coatings

Steam Oxidation Of Cr-Coated Sn-Containing Zircaloy Solid Rod At 1000 Degrees C

Evolution of Cr/Cr2O3 interface in Cr-coated zirconium alloy in high temperature steam