Abstract:This study investigates the effects of the element, Nb, on the microstructure, corrosion, and mechanical behavior of the Al 0.3 CrFeCoNiNb x (in molar ratio) high-entropy alloys (HEAs). It is found that the Nb addition facilitates the formation of the Nb-rich Laves phase for the HEAs. The HEAs show a hypoeutectic structure [the primary face-centered-cubic (FCC) phase] at x = 0.25–0.4, eutectic structure at x = 0.45, and hypereutectic structure (the primary Laves phase) at x = 0.5–0.75. In the 3.5 mass% NaCl solution, the Al 0.3 CrFeCoNiNb x HEAs are spontaneously passivated and exhibit a low corrosion rate of less than 10 −3 mm/year as a result of the formation of the protective passive films enriched in the chemically-stable Cr- and Nb-oxides. Compared with the FCC phase, the Laves phase displays a better corrosion resistance because of the higher concentration of Nb-oxides in its passive film. The Al 0.3 CrFeCoNiNb 0.45 eutectic HEA possesses superior corrosion resistance among the HEAs, which is ascribed to a high concentration, and more homogeneous distribution of Nb-oxides in the passive film, as well as higher electrochemical impedance and thicker passive film. Furthermore, the Al 0.3 CrFeCoNiNb x HEAs with larger fractions of the Laves phase and ultra-fine eutectic structure present higher strength and hardness. Nevertheless, the plastic strain of the HEAs sharply decreases with increasing the amount of the brittle Laves phase. The results propose an effective approach for developing the HEAs with good corrosion resistance, high strength, and hardness.

Addition of niobium in Fe-13Cr-4.5Al-2Mo alloy used as ATF cladding: Effect on high temperature water corrosion and in-situ electrochemistry

Corrosion Behavior of Nb-doped FeCrAl Alloy in 500°C Steam

Microstructure, mechanical properties and corrosion behavior of AlxCrMoNbZr multiprincipal element alloy coatings for accident-tolerant fuel claddings: Effect of Al content

Effect of Nb and La on Precipitates, Yield Strength and Toughness of FeCrAl Alloy

Hydrothermal Corrosion of Latest Generation of FeCrAl Alloys for Nuclear Fuel Cladding

Enhanced accident tolerance properties of AlCrCuFeMoNb x high entropy coating for nuclear fuel cladding

Effect of Nb Addition on Oxidation Mechanisms of High Cr Ferritic Steel in Ar–H2–H2O

Xe20+ ions irradiation and autoclave corrosion coupled with steam oxidation behaviors of FeCrAlMoSiY-coated Zr claddings

Enhanced Corrosion Resistance in Accident-Tolerant FeCrAl Alloy by Water-Assisted Laser Surface Modification

Effect of Al content on steam oxidation behavior for ferritic Fe-21Cr-xAl alloys

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Mechanical property and strengthening mechanism of ZrC nanoparticle dispersion-strengthened Mo containing FeCrAl alloys

Oxidation characteristics of Fe22Cr5Al3Mo-xNb alloys in high temperature steam

A high-entropy alloy nitride protective coating for fuel cladding in high temperature lead-bismuth eutectic alloy

Effect of Microstructure and Performance of Nb–Cr–Fe–Ni Quaternary Alloys with the Variation of Niobium Element Content

Performance of 14cr ODS-FeCrAl Cladding Tube for Accident Tolerant Fuel

Effect of Nb addition on the microstructure and corrosion resistance of ferritic stainless steel

Corrosion Behavior of Alumina-Forming Austenitic Steel in Supercritical Carbon Dioxide Conditions: Effects of Nb Content and Temperature

Effects of niobium on the microstructure, corrosion, and mechanical behavior of ultra-fine lamellar Al 0.3 CrFeCoNiNb x eutectic high-entropy alloys

Effect of Al and Cr Content on Air and Steam Oxidation of FeCrAl Alloys and Commercial APMT Alloy