Abstract:Introduction Reducing CO2 emissions for addressing climate change concerns is becoming increasingly important as the CO2 concentration in the atmosphere has increased rapidly since the industrial revolution. Most of currently investigated mitigation processes require CO2 in a concentrated form. However, CO2 is emitted from large sources, such as coal-fired power plants, at ~15% concentration. Therefore, capturing CO2 from dilute streams is an important step for many mitigation methods. Membrane separation methods are particularly promising due to potentially high CO2 selectivities and fluxes. By a proper choice of the pore size and surface properties, the CO2 transport across a membrane can be facilitated with respect to those of N2 and O2 leading to an efficient CO2 separation process. However, current membranes suffer from a poor control over the pore size on the 2-4 nm scale and surface properties required for CO2 separation. 2 We describe here novel mesoporous silica membranes containing surface-attached amino groups promising for CO2 separation from dilute sources. Defect-free mesoporous silica membranes on porous alumina supports exhibiting 26~28A pores were obtained by spin-coating (~5-7 μm thick) and solution growth methods. Several kind of amino groups were attached to the membrane surface using amino-containing silicon alkoxides, such as 3-aminopropyltriethoxysilane. Smaller pores (~18-22A) were obtained by silylating the original calcined membranes with silane coupling agents. The characterization of the silylated silica membranes by BET surface area measurements, N2 adsorption pore size analysis and TGA confirmed that silylation technique was successful in decreasing the membrane pore size by ~8 A which is required for completely filling the pore volume with surface attached aminopropylsilyl groups and achieving facilitated transport of CO2. CO2/N2 separation on amine-modified silica membranes was investigated at 20-70C and transmembrane pressure drop of 0.2-1 atm as a function of the pore size and the nature of the amino group using a Wicke-Kalenbach permeability cell. The membrane performance was evaluated with respect to permeance and separation selectivity, determined by a GC/MS analysis of the feed, permeate, and retentate streams.

Fabrication of high-flux SAPO-34 membrane on α-Al2O3 four-channel hollow fibers for CO2 capture from CH4

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Thin Carbon/sapo-34 Microporous Composite Membranes for Gas Separation

Synthesis of A Sapo-34 Membrane on Macroporous Supports for High Permeance Separation of A Co2/Ch4 Mixture

Highly H 2 permeable SAPO-34 membranes by steam-assisted conversion seeding

The preparation of zeolite NaA membranes on the inner surface of hollow fiber supports

Fabrication Of Zeolite Mfi Membranes Supported By Alpha-Al2o3 Hollow Ceramic Fibers For Co2 Separation

Zeolite membranes on hollow fiber supports

CO2/CH4 Separation Performance and CoAPSO-5 Zeolite Membrane Preparation

Diethylamine template-directed synthesis of hollow fiber supported SAPO-34 membranes

Ordered Mesoporous Silica Membranes for CO2 Separation from Flue Gas

Fabrication and Scale-Up of Multi-Leaf Spiral-Wound Membrane Modules for CO2 Capture from Flue Gas

Synthesis of SAPO-34 Molecular Sieve Membranes by Steam-assisted Conversion Seeding and Their Characterization

Rapid Fabrication of High‐Permeability Mixed Matrix Membranes at Mild Condition for CO2 Capture (Small 19/2023)

Synthesis of thin SAPO-34 zeolite membranes in concentrated gel

Thin SAPO-34 zeolite membranes prepared by ball-milled seeds

Multivariate Polycrystalline Metal-Organic Framework Membranes for CO2/CH4 Separation.

Thin Film Mixed Matrix Hollow Fiber Membrane Fabricated by Incorporation of Amine Functionalized Metal-Organic Framework for CO2/N2 Separation

Improved Synthesis of Hollow Fiber SSZ‐13 Zeolite Membranes for High‐Pressure CO2/CH4 Separation

Preparation of Ultra-high Permeability Dual-layer Al 2 O 3 Hollow Fiber Supports for Zeolite Membrane Fabrication

Preparation and pervaporation performance of hollow fiber supported SAPO-34 zeolite membranes