Abstract:Introduction Reducing CO2 emissions for addressing climate change concerns is becoming increasingly important as the CO2 concentration in the atmosphere has increased rapidly since the industrial revolution. Most of currently investigated mitigation processes require CO2 in a concentrated form. However, CO2 is emitted from large sources, such as coal-fired power plants, at ~15% concentration. Therefore, capturing CO2 from dilute streams is an important step for many mitigation methods. Membrane separation methods are particularly promising due to potentially high CO2 selectivities and fluxes. By a proper choice of the pore size and surface properties, the CO2 transport across a membrane can be facilitated with respect to those of N2 and O2 leading to an efficient CO2 separation process. However, current membranes suffer from a poor control over the pore size on the 2-4 nm scale and surface properties required for CO2 separation. 2 We describe here novel mesoporous silica membranes containing surface-attached amino groups promising for CO2 separation from dilute sources. Defect-free mesoporous silica membranes on porous alumina supports exhibiting 26~28A pores were obtained by spin-coating (~5-7 μm thick) and solution growth methods. Several kind of amino groups were attached to the membrane surface using amino-containing silicon alkoxides, such as 3-aminopropyltriethoxysilane. Smaller pores (~18-22A) were obtained by silylating the original calcined membranes with silane coupling agents. The characterization of the silylated silica membranes by BET surface area measurements, N2 adsorption pore size analysis and TGA confirmed that silylation technique was successful in decreasing the membrane pore size by ~8 A which is required for completely filling the pore volume with surface attached aminopropylsilyl groups and achieving facilitated transport of CO2. CO2/N2 separation on amine-modified silica membranes was investigated at 20-70C and transmembrane pressure drop of 0.2-1 atm as a function of the pore size and the nature of the amino group using a Wicke-Kalenbach permeability cell. The membrane performance was evaluated with respect to permeance and separation selectivity, determined by a GC/MS analysis of the feed, permeate, and retentate streams.

CO2/CH4 Separation Performance and CoAPSO-5 Zeolite Membrane Preparation

The preparation of zeolite NaA membranes on the inner surface of hollow fiber supports

Isopropanol Accelerated Crystallization of AlPO-18 Membranes for CO2/CH4 and N2/CH4 Separations

AlPO-18 Membranes for CO2/CH4 and N2/CH4 Separations

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Improved Synthesis of Hollow Fiber SSZ‐13 Zeolite Membranes for High‐Pressure CO2/CH4 Separation

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Preparation of zeolite MFI membranes on alumina hollow fibers with high flux for pervaporation

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Multivariate Polycrystalline Metal-Organic Framework Membranes for CO2/CH4 Separation.

Multivariate Polycrystalline Metal–Organic Framework Membranes for CO 2 /CH 4 Separation

Unexpected high CO2 over C2H2 separation performance by high-silica CHA zeolite membranes

Ordered Mesoporous Silica Membranes for CO2 Separation from Flue Gas

Upgrading CO2/CH4 separation performances of Pebax-based mixed-matrix membranes incorporated with core/shell-structured ZIF-L(Co)@ZIF-8 composite nanosheets

Large Surface-to-volume-ratio and Ultrahigh Selectivity SSZ-13 Membranes on 61-Channel Monoliths for Efficient Separation of CO2/CH4 Mixture

Benchmark CO2 separation achieved by highly fluorinated nanoporous molecular sieve membranes from nonporous precursor via in situ cross-linking

Thin SAPO-34 zeolite membranes prepared by ball-milled seeds

Preparation of a PVA/Chitosan/Glass Fiber Composite Membrane and the Performance in CO2 Separation

Modified Zeolite/Polysulfone Mixed Matrix Membrane for Enhanced CO2/CH4 Separation

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

High-performance multi-layer composite membrane with enhanced interlayer compatibility and surface crosslinking for CO2 separation