Abstract:Membrane technology is acknowledged as one of the most efficient for biogas upgrading, separating simultaneously CH4 and CO2 in the retentate and permeate streams, respectively. The sustainability would still be improved by using renewable and environmentally friendly materials for membrane fabrication. Specifically, this study is focused on laboratory-scale mixed gas separation tests of composite membranes prepared from chitosan (CS), a hydrophilic, biodegradable and biocompatible polymer from abundant natural resources, with good adhesive and film forming properties and high affinity for CO2 due to the primary amine and hydroxyl groups functionalities in CS. To improve mechanical resistance and CO2/CH4 separation, CS was hybridized by a 5 wt% loading of non-toxic ionic [emim][acetate] liquid (IL), and variable loadings of compatible inorganic fillers, such as 3D zeolite 4A and NaETS-10, and layered AM-4 titanosilicate. The CS-based mixed matrix layer was coated on porous polyether sulfone (PES) support. The CO2 permeance and CO2/CH4 separation were measured at different feed concentrations to evaluate the membranes performance in the treatment of different streams. This separation behavior was explained by the wet thickness, water uptake, morphology and ionic resistance of the composite membrane. As such, the 5 wt% Zeolite 4A and NaETS-10-filled ILCS/PES membranes provided a good dispersion in the ILCS matrix and the mixed matrix layer a good adhesion with the porous PES support, leading to high CO2 permeances and separation factors up to 30, whereas the more hydrophilic lamellar AM-4 titanosilicate-filled ILCS layer showed cluster agglomeration in the matrix and a faster detachment of the coated layer from the PES substrate. With increasing filler loading, an increase of the permeance of both CO2 and CH4 gas components was, although selectivity decreased upon increasing AM-4 filler loading. The CO2/CH4 mixed gas separation performance was validated by a custom-built model for a wide range of feed composition, to cover such processes as natural gas sweetening, biogas upgrading and enhanced oil recovery with acceptable relative error below 10% (absolute value), except for the AM-4 titanosilicate-filled ILCS membranes, showing morphological fabrication defects.

Large Surface-to-volume-ratio and Ultrahigh Selectivity SSZ-13 Membranes on 61-Channel Monoliths for Efficient Separation of CO2/CH4 Mixture

Improved Synthesis of Hollow Fiber SSZ‐13 Zeolite Membranes for High‐Pressure CO2/CH4 Separation

Novel MMM using CO2 selective SSZ-16 and high-performance 6FDA-polyimide for CO2/CH4 separation

Breaking the Permeability-Selectivity Trade-Off: Advanced carbon molecular sieve membranes derived from thermally rearranged Mixed-Matrix membrane precursors

Enhanced CO2/CH4 Separation Performance of a Mixed Matrix Membrane Based on Tailored MOF-Polymer Formulations

Efficient synthesis of thin SSZ-13 membranes by gel-less method

Large‐area vacuum‐treated ZIF‐8 mixed‐matrix membrane for highly efficient methane/nitrogen separation

Honeycomb ZIF‐67 Membrane With Hierarchical Channels for High‐Permeance Gas Separation

High-efficiency CO2 separation using hybrid LDH-polymer membranes

High-performance 19-channel monolithic chabazite membranes for efficient separation of water/ethanol and water/isopropanol mixtures by pervaporation and vapor permeation

Tubular MXene/SS Membranes for Highly Efficient H2/CO2 Separation

Exploring the separation properties of high-Si CHA membranes for the CO 2 capturing technology: Impact of the selective layer thickness and growth mechanism

Large-size 19-channel monolithic silicalite-1 membranes for butane separation: Separation performance and quantification of concentration polarization

Multivariate Polycrystalline Metal-Organic Framework Membranes for CO2/CH4 Separation.

ZIF-301 MOF/6FDA-DAM polyimide mixed-matrix membranes for CO2/CH4 separation

Constructing Low-Resistance and High-Selectivity Transport Multi-Channels in Mixed Matrix Membranes for Efficient CO2 Separation

ZIF-L Membrane with a Membrane-Interlocked-support Composite Architecture for H2/CO2 Separation

Fabrication of polyimide mixed matrix membranes with asymmetric confined mass transfer channels for improved CO2 separation

Ultrathin and Self-Supporting MOF/COF-Based Composite Membranes for Hydrogen Separation and Purification from Coke Oven Gas

Fast synthesis of thin SSZ-13 membranes by a hot-dipping method

Chitosan-based mixed matrix composite membranes for CO2/CH4 mixed gas separation. Experimental characterization and performance validation