Abstract:Membrane technology is acknowledged as one of the most efficient for biogas upgrading, separating simultaneously CH4 and CO2 in the retentate and permeate streams, respectively. The sustainability would still be improved by using renewable and environmentally friendly materials for membrane fabrication. Specifically, this study is focused on laboratory-scale mixed gas separation tests of composite membranes prepared from chitosan (CS), a hydrophilic, biodegradable and biocompatible polymer from abundant natural resources, with good adhesive and film forming properties and high affinity for CO2 due to the primary amine and hydroxyl groups functionalities in CS. To improve mechanical resistance and CO2/CH4 separation, CS was hybridized by a 5 wt% loading of non-toxic ionic [emim][acetate] liquid (IL), and variable loadings of compatible inorganic fillers, such as 3D zeolite 4A and NaETS-10, and layered AM-4 titanosilicate. The CS-based mixed matrix layer was coated on porous polyether sulfone (PES) support. The CO2 permeance and CO2/CH4 separation were measured at different feed concentrations to evaluate the membranes performance in the treatment of different streams. This separation behavior was explained by the wet thickness, water uptake, morphology and ionic resistance of the composite membrane. As such, the 5 wt% Zeolite 4A and NaETS-10-filled ILCS/PES membranes provided a good dispersion in the ILCS matrix and the mixed matrix layer a good adhesion with the porous PES support, leading to high CO2 permeances and separation factors up to 30, whereas the more hydrophilic lamellar AM-4 titanosilicate-filled ILCS layer showed cluster agglomeration in the matrix and a faster detachment of the coated layer from the PES substrate. With increasing filler loading, an increase of the permeance of both CO2 and CH4 gas components was, although selectivity decreased upon increasing AM-4 filler loading. The CO2/CH4 mixed gas separation performance was validated by a custom-built model for a wide range of feed composition, to cover such processes as natural gas sweetening, biogas upgrading and enhanced oil recovery with acceptable relative error below 10% (absolute value), except for the AM-4 titanosilicate-filled ILCS membranes, showing morphological fabrication defects.

Exploring the separation properties of high-Si CHA membranes for the CO 2 capturing technology: Impact of the selective layer thickness and growth mechanism

Selective CO2 Separation from CO2−N2 Mixtures by Immobilized Carbonate−Glycerol Membranes

Unexpected high CO2 over C2H2 separation performance by high-silica CHA zeolite membranes

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Large Surface-to-volume-ratio and Ultrahigh Selectivity SSZ-13 Membranes on 61-Channel Monoliths for Efficient Separation of CO2/CH4 Mixture

Mixed-Matrix Organo–Silica–Hydrotalcite Membrane for CO2 Separation Part 2: Permeation and Selectivity Study

Multivariate Polycrystalline Metal-Organic Framework Membranes for CO2/CH4 Separation.

Performance of Multilayer Composite Hollow Membrane in Separation of CO2 from CH4 in Mixed Gas Conditions

Separation Performance of Si-CHA Zeolite Membrane for a Binary H 2 /CH 4 Mixture and Ternary and Quaternary Mixtures Containing Impurities

Efficient separation of CO2/CH4 by covering ultrathin ionic liquid film on COF membrane

Multivariate Polycrystalline Metal–Organic Framework Membranes for CO 2 /CH 4 Separation

Enhanced CO2/CH4 Separation Performance of a Mixed Matrix Membrane Based on Tailored MOF-Polymer Formulations

Conformational-change-induced selectivity enhancement of CAU-10-PDC membrane for H2/CH4 and CO2/CH4 separation

CO2/CH4 Separation Performance of SiO2/PES Composite Membrane Prepared by Gas Phase Hydrolysis and Grafting Coating in Gas-Liquid Membrane Contactor: A Comparative Study

Solvent effects on diffusion channel construction of organosilica membrane with excellent CO2 separation properties

Chitosan-based mixed matrix composite membranes for CO2/CH4 mixed gas separation. Experimental characterization and performance validation

Highly Perm-Selective Micro-Porous Hydrotalcite-Silica Membrane for Improved Carbon Dioxide-Methane Separation

CO2/CH4 Separation Performance and CoAPSO-5 Zeolite Membrane Preparation

Optimizing Porosity for Membrane-based Gas Separations

Hybrid Organosilica Membrane with High CO2 Permselectivity Fabricated by a Two-Step Hot Coating Method

Tailoring CO2/CH4 Separation Efficiency with [THTDP][Cl]/Pebax-1657 Supported Ionic Liquid Membranes: Design, Characterization, and Theoretical Insights