Separation Performance of Si-CHA Zeolite Membrane for a Binary H 2 /CH 4 Mixture and Ternary and Quaternary Mixtures Containing Impurities

Tangyin Wu,Chaojiu Shu,Shuai Liu,Boshen Xu,Shenglai Zhong,Rongfei Zhou
DOI: https://doi.org/10.1021/acs.energyfuels.0c01720
2020-08-04
Abstract:The separation of H<sub>2</sub>/CH<sub>4</sub> mixtures is very common in the natural gas and petrochemical industries. There are some higher C2–C4 hydrocarbons and water vapor that are used as impurity gases. Si-CHA zeolite membranes display a high H<sub>2</sub> permeance of 1.44 × 10<sup>–6</sup> mol/(m<sup>2</sup> s Pa) (permeability of 10800 barrers) and H<sub>2</sub>/CH<sub>4</sub> selectivity of 85 for an equimolar H<sub>2</sub>/CH<sub>4</sub> mixture at 298 K and 0.2 MPa pressure drop. A third gas decreased H<sub>2</sub> permeance and H<sub>2</sub>/CH<sub>4</sub> selectivity of the membrane. Hydrogen permeance was reduced in an order similar to the adsorption amount in zeolite: H<sub>2</sub>O &gt; C<sub>3</sub>H<sub>8</sub> &gt; <i>n</i>-butane &gt; ethane. The effects of temperature, pressure, and feed concentration were studied on separation performances of the membrane in the binary and ternary mixtures. A simple model was built up to predict the reduction of permeance and selectivity when multi impurities were contained, and the predicted value agreed well with the tested one. A stable performance was obtained within several hours in all the tests. The separation performance of the membrane was recovered to the original level when the impurity gas was removed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c01720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c01720</a>.Discussion of experimental processes used, figures of SEM images, XRD patterns, pressure and temperature dependence of single-gas permeances, time course of permeances and H<sub>2</sub>/CH<sub>4</sub> selectivity, and H<sub>2</sub>/C<sub>2</sub>H<sub>6</sub> selectivity as a function of pressure drop and temperature, and table of summary of test conditions (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c01720/suppl_file/ef0c01720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?