Abstract:Sb2(SexS1 − x)3 alloy materials with tunable bandgaps combining the advantages of Sb2S3 and Sb2Se3 showed high potential in low cost, non‐toxicity, and high stability solar cells. The composition dependence of device performance becomes indispensable to study. However, traditional approaches often implement 1 composition at a time, which easily lead to long period and systematic errors. The present work developed a high‐throughput experimental method, close‐space dual‐plane‐source evaporation (CDE) method, to successfully deposit continuous composition spread Sb2(SexS1 − x)3 library at 1 time. On the surface of the obtained film, the x value of Se content evolved from 0.09 to 0.84 by a series of complementary characterizations. At depth direction, the alloy film kept high crystallinity and composition consistency. Solar cell arrays (19 × 6) were fabricated to investigate the relationship between compositions and performances. As the increase of Se content, the conversion efficiency first increased from 1.8% to 5.6% and then decreased to 5%. The Voc and Jsc demonstrated an opposite evolution trend. The champion device with the composition of Sb2(Se0.68S0.32)3 achieved the Voc and Jsc trade‐off exceeding the performances of Sb2S3 (2.43%) and Sb2Se3 (4.97%) devices. Cryogenic and transient characterizations were utilized to investigate the distinct performance evolution mechanism. There existed shallow defect levels in Se‐rich alloys and deep defects in sulfur‐rich ones. The widely tuned absorber compositions combined with distinct defect characters induced to the large variation of device performance. The present continuous composition spread Sb2(SexS1 − x)3 film and their CDE fabrication technique were expected to efficiently screen materials and promote the development of antimony chalcogenide solar cells.

In Situ Sulfurization to Generate Sb2(Se1 − Xsx)3 Alloyed Films and Their Application for Photovoltaics

High‐throughput Method to Deposit Continuous Composition Spread Sb2(SexS1 − X)3 Thin Film for Photovoltaic Application

Sb-2(Se1-xSx)(3) Thin-Film Solar Cells Fabricated by Single-Source Vapor Transport Deposition

Hydrazine solution processed Sb2S3, Sb2Se3 and Sb2(S(1-x)Se(x))3 film: molecular precursor identification, film fabrication and band gap tuning

1D/3D Alloying Induced Phase Transition in Light Absorbers for Highly Efficient Sb2Se3 Solar Cells

Postsurface Selenization for High Performance Sb2S3 Planar Thin Film Solar Cells

Single-source Thermal Evaporation Converts Anion Controllable Sb 2 (s,se) 3 Film for Fabricating High-Efficiency Solar Cell

Direct Solution Deposition of Device Quality Sb2S3-xSex Films for High Efficiency Solar Cells

Single-source thermal evaporation converts anion controllable Sb2(S,Se)3 film for fabricating high-efficiency solar cell

Over 6% Certified Sb2(S,Se)3 Solar Cells Fabricated Via in Situ Hydrothermal Growth and Postselenization

Chemical Etching Induced Surface Modification and Gentle Gradient Bandgap for Highly Efficient Sb2(S,Se)3 Solar Cell

Vapor Transport Deposition of Sb 2 (S,Se) 3 Solar Cells with Continuously Tunable Band Gaps

Vapor Transport Deposition of Sb2(S,Se)3 Solar Cells with Continuously Tunable Band Gaps

Se-Elemental Concentration Gradient Regulation for Efficient Sb2(S,Se)3 Solar Cells With High Open-Circuit Voltages

Fabrication of Homogenous Sb 2 (S,Se) 3 Solar Cells by Close Space Sublimation Using a Single Alloyed Powder Source

Reactive Close-Spaced Sublimation Processed CuSbSe2 Thin Films and Their Photovoltaic Application

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Confined‐Space Selenium‐Assisted Tellurization Posttreatment Strategy for Efficient Full‐Inorganic Sb2S3 Thin‐Film Solar Cells

Fabrication of Sb2S3 Thin Films by Magnetron Sputtering and Post-Sulfurization/selenization for Substrate Structured Solar Cells

Confined‐space selenium assisted tellurization post‐treatment strategy for efficient full‐inorganic Sb2S3 thin film solar cells

All-Vacuum-Processed Sb<sub>2</sub>(S,Se)<sub>3</sub> Thin Film Photovoltaic Devices via Controllable Tuning Seed Orientation