Abstract:In the field of additive manufacturing (AM), a promising alloy that is gaining attention is the near-α Ti–6Al–2Sn–4Zr–2Mo (Ti6242) alloy. This alloy is known for its remarkable resistance to creep and corrosion at elevated temperatures. However, the production of Ti6242 components via Laser-based AM technologies faced with several challenges, such as the formation of residual stress in the as-built state that originates from the nature of these processes. Therefore, this study has a dual objective: first, to evaluate the microstructure and residual stresses in the as-built Ti6242 produced through laser powder bed fusion. Secondly, to investigate the impact of a promising post heat treatment on mitigating residual stresses, inducing alterations in the microhardness of the Ti6242 alloy and its ductility, phase transformations and microstructure evolution. The as-built specimen exhibited a significant residual stress of 1357 MPa, which was caused by the pronounced temperature gradients experienced during the fabrication process. It is interesting to note that this promising post heat treatment was highly effective in eliminating 99% of the residual stress. After heat treatment, the amount of α′ present in the as-built specimen decreased. This resulted in the activation of diffusion of elements such as molybdenum, causing a proportion of the α′ to decompose into the more ductile α+β structure. Additionally, it is revealed that the microstructural changes and relieved stresses from the heat treatment process caused a lower microhardness and a higher ductility under compressive loading, as the elongation and toughness reached 20.5% and 23.255 kJ/mm 3 in the heat-treated samples, respectively. The outcomes of this work facilitate the use of this alloy in the production of complex shape components through laser-based AM technologies.

Influence of Heat-Treatment on the Dynamic Behavior of 3D Laser-Deposited Ti–6Al–4V Alloy

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Effects of different heat treatment temperatures on the microstructure and mechanical properties of additive manufacturing Ti65 alloys

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Dynamic Response of Ti-6Al-2Zr-1Mo-1V Alloy Manufactured by Laser Powder-Bed Fusion

Dynamic compressive properties and underlying failure mechanisms of selective laser melted Ti-6Al-4V alloy under high temperature and strain rate conditions

Effect of heating treatment on the microstructural evolution and dynamic tensile properties of Ti-6Al-4V alloy produced by selective laser melting

Effect of Heat Treatment on Microstructure and Mechanical Properties of Titanium Alloy Fabricated by Laser–Arc Hybrid Additive Manufacturing

The Influence of Heat Treatment Temperature on Microstructures and Mechanical Properties of Titanium Alloy Fabricated by Laser Melting Deposition

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Effects of Heat Treatments on Microstructures and Mechanical Properties of Ti6Al4V Alloy Produced by Laser Solid Forming

Exploring the Heat Treatment Parameters, Microstructural Evolution, and Mechanical Properties of Ti–6Al–4V Alloy Fabricated by a Selective Laser Melting Process

Effect of heat treatment on microstructure and mechanical properties of laser-deposited Ti65 near-alpha titanium alloy

The impact of heat treatment on microstructure, residual stress, and mechanical behavior of laser powder bed fusion additively manufactured Ti–6Al–2Sn–4Zr–2Mo alloy

Effect of Heat Treatments on Mechanical Properties and Wear Resistance of Laser-Powder Bed-Fused Ti6Al4V Alloy

Influence of Heat Treatment on the Microstructure and Mechanical Properties of TC4 Alloy Fabricated by Selective Laser Melting

Effect of heat treatment on microstructure and tribological behavior of Ti–6Al–4V alloys fabricated by selective laser melting

Simultaneous improvement of strength and elongation of laser melting deposited Ti-6Al-4V titanium alloy through three-stage heat treatment

On Strain-Hardening Behavior and Ductility of Laser Powder Bed-Fused Ti6Al4V Alloy Heat-Treated above and below the β-Transus

Influence of laser treatment on the microstructural evolution and performance of Ti65 alloy

Effect of multi-pass cooling compression and subsequent heat treatment on microstructural and mechanical evolution of TC4 alloys