Abstract:Multilayer piezoelectric devices need to co-sinter the piezoelectric ceramic layers and the Ag-rich Ag–Pd internal electrode layers at a low temperature (less than the Ag melting point of 961.78 °C), and need to use Sn–Zn-based lead-free solder to weld the components at 260 °C. This requires low-temperature sintering of high-performance piezoelectric ceramics with a Curie temperature (T c) higher than 260 °C. Thereby low-temperature (940 °C) sintering 0.09 Pb(Ni1/3Nb2/3)O3‒ 0.03 Pb(Mg1/2W1/2)O3‒0.88 Pb(Zr0.5Ti0.5)O3 ceramics are prepared via the solid-state reaction method. Samples added with different Ta2O5 contents are fabricated and compared in terms of phase structure, microstructure, piezo-/ferro-electric properties, and dielectric relaxation. High piezoelectric properties (d 33 = 640 pC/N, d 33∗ = 676 p.m./V, T c = 303 °C) are achieved in the 0.70 wt% Ta2O5 added ceramic with a minimum activation energy of domain wall movement (E a) of 0.025 eV. Rietveld refinement and Raman spectroscopy show that all the ceramics exhibit rhombohedral-tetragonal (R-T) coexistence and the distortion degree of crystal structures increases with the increase of Ta2O5 content. Our results show that the larger the content of the tetragonal phase (CTP), the lower the E a, the smaller the domain, and the higher the piezoelectric response. Low E a favors orientation and extension of polar regions and facilitates the formation of the nanometer-size domain structure (polar nanoregions) which is observed by using piezoresponse force microscopy, thus resulting in high piezoelectric properties. This mechanism associated with the CTP, the E a and the domain structure reveals the origin of the high piezoelectricity in the low-temperature sintering PZT-based relaxor ferroelectric ceramics.

Properties of Low‐Temperature Sintering PNN–PMW–PSN–PZT Piezoelectric Ceramics with Ba(Cu1/2W1/2)O3 Sintering Aids

The electrical properties of low-temperature sintered 0.07Pb(Sb1/2Nb1/2)O3-0.93Pb(Zr Ti1−)O3 multilayer piezoceramic actuator

Low-temperature Sintering BCZT-Dy Ceramics with Low Strain Hysteresis for Actuator Application

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Low‐temperature sintered 0.5Pb(Ni1/3Nb2/3)O3–0.16PbZrO3–0.34PbTiO3 piezoelectric textured ceramics by Li2CO3 addition

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Optimizing structure and electrical properties of high-Curie temperature PMN-PHT piezoelectric ceramics via tailoring sintering process

Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties

High Dielectric and Piezoelectric Properties of Low-Temperature Sintering PNN-PMN-PZT Ceramics for Low-Loss Piezoelectric Actuator Application

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Low-temperature Sintered Bi0.5Na0.5TiO3-SrTiO3 Incipient Piezoceramics and the Co-Fired Multilayer Piezoactuator Thereof

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Low-Temperature Sintering of Lead Magnesium Nickel Niobate Zirconate Titanate (Pmn-Pnn-pzt) Piezoelectric Ceramic, with High Performances

Competition of Li+ and Cu2+ ions dopant in BiAlO3–Pb(Zr,Ti)O3 piezoelectric ceramics in low temperature sintering processes

Low-temperature Sintered (Na1/2bi1/2)tio3-Based Incipient Piezoceramics for Co-Fired Multilayer Actuator Application

Piezoelectric enhancement of 0.6Pb(Zr,Ti)O3–0.4Pb(Ni1/3Nb2/3)O3 ceramics with artificial MPB engineering

Low-temperature sintering PZT-based ceramics for extreme condition application

Low‐temperature sintering Sm‐doped PMN–PZ–PT multilayer ceramic actuator with high strain and temperature stability

Low‐Temperature Sintering of Lead‐Based Piezoelectric Ceramics

Origin of high piezoelectricity in low-temperature sintering PZT-based relaxor ferroelectric ceramics

Piezoelectric properties of PCW-PNN-PZT ceramics sintered at low temperature