Abstract:Combinational oxides PbO-CuO are incorporated into the matrix of 0.645Pb(Zr0.41Ti0.59)O3-0.355Pb(Ni1/3Nb2/3)O3 (PZT-PNN) in order to realize low-temperature sintering while achieving superior electrical properties, which are used to fabricate ceramic-electrode integrated devices for flat-panel-speakers. Ceramics are prepared using conventional solid-state reaction technique, and the effects of different amounts of sintering additives PbO-CuO on phase structure, grain size, sintering temperature and electrical properties are systematically investigated. On that basis, comprehensive electrical properties are further enhanced via optimizing the PbO (CuO) proportions in PbO-CuO additives. The results show that doping appropriate PbO-CuO decreases the sintering temperature significantly from normally 1250 °C for most of PZT-based ceramics by more than 250 °C, while superior electrical properties are still achieved. PZT-PNN + 1.5 wt.% (0.77PbO-0.23CuO) ceramics sintered at 1000 °C exhibit optimal electrical properties of d33 = 780 pC/N, kp = 0.62, ε33T/ε0 = 3982, tan δ = 0.025 and density of 7.87 g/cm3. Furthermore, ceramics sintered at 950 °C even possess over 89% of the optimal piezoelectric properties, with d33 = 695 pC/N, kp = 0.59, ε33T/ε0 = 3690, tan δ = 0.018. This work paves the way for mass production of co-firing ceramic-electrode integrated devices for high performance flat-panel-speaker applications, and inspires the low-temperature sintering strategy in other ceramic materials.

Piezoelectric properties of PCW-PNN-PZT ceramics sintered at low temperature

Dielectric and piezoelectric properties of low temperature sintering PMW-PNN-PZT ceramics doped with CuO and Bi for duplex ultrasonic sensor

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Achieving superior electrical properties of PZT-PNN piezoelectric ceramics through low-temperature sintering with PbO-CuO eutectic additives

Optimizing structure and electrical properties of high-Curie temperature PMN-PHT piezoelectric ceramics via tailoring sintering process

Microstructures And Pyroelectric Properties Of Multicomposition 0.9pbzro(3)Center Dot Xpbtio(3)Center Dot(0.1-X)Pb(Zn1/3nb2/3)O-3 Ceramics

High-Performance Piezoelectric Characteristics of Sm Substituted Pb(Ni,Nb)O3-Pb(Zr,Ti)O3-Pb(Mg,W)O3 System Ceramics for Ultrasonic Transducer Application

Microstructures and Pyroelectric Properties of Multicomposition 0.9PbZrO<sub>3</sub>·<i>x</i>PbTiO<sub>3</sub>·(0.1−<i>x</i>)Pb(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub>Ceramics

Investigation of phase structure and electrical properties of PMN-PSN-PNN–PZT ceramics with different PNN content

Investigation on Microscopic Mechanisms of High-Curie Temperature PMN-PH-PT Piezoelectric Ceramics

Composition Design of PMN-PH-PT Piezoelectric Ceramics for High-Temperature Actuator Applications

Low-Temperature Sintering of Lead Magnesium Nickel Niobate Zirconate Titanate (Pmn-Pnn-pzt) Piezoelectric Ceramic, with High Performances

Low-temperature sintering PZT-based ceramics for extreme condition application

Piezoelectric and Dielectric Properties of PMN-PNN-PZT Ceramics with the Variation of High Energy Ball Milling Time

Piezoelectric enhancement of 0.6Pb(Zr,Ti)O3–0.4Pb(Ni1/3Nb2/3)O3 ceramics with artificial MPB engineering

Nanoscale Insight Of High Piezoelectricity In High-T-C Pmn-Ph-Pt Ceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

The Investigation of PMS-PNW-PZT Piezoelectric Ceramics

Piezoelectric properties of PMN-PNN-PZT ceramics for the application ultrasonic device of ultrasonic tooth cleaner

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Structure And Piezoelectric Properties Of Pzn-Pnn-Pt Ceramics