Abstract:Lead zirconate titanate (PZT) based piezoelectric ceramics are applied in ultrasonic transducers and multilayer actuators fields universally. Excellent piezoelectric properties of PZT-based ceramics of low sintering temperature are crucial for the applications of high-power motors and multilayer piezo-actuators due to the reduction of cost and energy consumption. In this paper, a ternary solid-solution ceramic system 0.05Pb(Mn1/3Sb2/3)O30.47PbZrO3-0.48PbTiO3 (PMS-PZT) was studied. A new complex additive composed of SiO2-Li2O3-CuO was doped into the PMS-PZT ceramics. The doping of CuO and Li2O3 was discovered to be able to lower the sintering temperature and remain electric properties efficiently, while the doping of SiO2 can decrease the grain size and increase the density. All ceramic samples were fabricated by solid-phase reaction method and sintered in the low temperature range from 800 degrees C to 1000 degrees C. The phase structure, morphology of natural surface and electrical properties of ceramics doped by 0.5 wt% additive were characterized. The 0.5 wt% additive doped PMS-PZT ceramics exhibit remarkable comprehensive piezoelectric properties sintered at 900 degrees C (d33 = 343 pC/N, Qm =1016, Tc = 328 degrees C, tans = 0.4 % (at 25 degrees C), epsilon r =1344, d33* = 490 pm/V). The sintering temperature 900 degrees C is significantly below the melting point of Ag (961.9 degrees C) and Cu (1083.4 degrees C), so the more cost-effective Cu internal electrodes and Ag rich Ag/Pd electrodes can be used to substitute the expensive Pd rich Ag/Pd internal electrodes in the production of devices composed of multilayer ceramic. The research of this work provides an important candidate additive for the applications of high-performance transducers and multilayer actuators with low cost.

Low‐Temperature Sintering of Lead‐Based Piezoelectric Ceramics

Low-Temperature Sintering of Pzt Ceramics

Low-Temperature Sintering of Lead Magnesium Nickel Niobate Zirconate Titanate (Pmn-Pnn-pzt) Piezoelectric Ceramic, with High Performances

Achieving superior electrical properties of PZT-PNN piezoelectric ceramics through low-temperature sintering with PbO-CuO eutectic additives

Optimizing structure and electrical properties of high-Curie temperature PMN-PHT piezoelectric ceramics via tailoring sintering process

Microstructure and piezoelectric properties of PMS–PZT ceramics

Low temperature sintering of Li2CO3 added Pb(Ni1/3Nb2/3)-Pb(Zr,Ti)O3 ceramics with high piezoelectric properties

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Enhancement of Piezoelectric Properties in Low-Temperature Sintering PZN–PZT Ceramics by Sr2+ Substitution

Effect of SiO2-Li2O3-CuO Additive on Piezoelectric Properties of PMS-PZT Ceramics at Low Sintering Temperature

Achieving High Piezoelectricity and Excellent Temperature Stability in Pb( Zr , Ti )O 3 -Based Ceramics via Low-Temperature Sintering

Origin of high piezoelectricity in low-temperature sintering PZT-based relaxor ferroelectric ceramics

High Piezoelectric D33 Coefficient of Lead-Free (ba0.93ca0.07)(ti0.95zr0.05)o3 Ceramics Sintered at Optimal Temperature

Influence of Spark Plasma Sintering Temperature on Piezoelectric Properties of PZT-PMnN Piezoelectric Ceramics

Low‐Temperature Sintering of Li‐Modified (K, Na)NbO3 Lead‐Free Ceramics: Sintering Behavior, Microstructure, and Electrical Properties

Competition of Li+ and Cu2+ ions dopant in BiAlO3–Pb(Zr,Ti)O3 piezoelectric ceramics in low temperature sintering processes

Low‐temperature sintered 0.5Pb(Ni1/3Nb2/3)O3–0.16PbZrO3–0.34PbTiO3 piezoelectric textured ceramics by Li2CO3 addition

Low-Temperature Sintering of ZnO and B2O3 Co-Doped (k0.5na0.5)nbo3 Lead-Free Piezoelectric Ceramics

Lead Zirconate Titanate Ceramics and Monolithic Piezoelectric Transformer of Low Firing Temperature

Low-Temperature Sintering of ZnO and B<sub>2</sub>O<sub>3</sub> Co-Doped (K<sub>0.5</sub>Na<sub>0.5</sub>)NbO<sub>3</sub> Lead-Free Piezoelectric Ceramics

Low temperature sintering and enhanced piezoelectricity of lead-free (Na 0.52 K 0.4425 Li 0.0375)(Nb 0.86 Ta 0.06 Sb 0.08) O 3 ceramics prepared from nano-powders