Abstract:Perovskite type (Ba0.85Ca0.15)(Zr0.10Ti0.90)1−x(Cu1/3Nb2/3)xO3 (x = 0.00, 0.005, 0.01, 0.015 and 0.02) (abbreviated as BCZT-1000xCN) lead-free ceramics were prepared via a conventional solid-state reaction method. The phase structure, microstructural morphology and electrical properties of BCZT-1000xCN ceramics with different CuO/Nb2O5 content were systematically investigated. The phase identifications of the ceramic samples were investigated by X-ray diffraction and the results indicated that all samples showed a pure perovskite phase with no secondary phase. Microstructure, electrical properties and polarization–electric field (P–E) hysteresis loops indicated that a small amount of CuO/Nb2O5 (x = 0.005–0.02) addition affected the properties obviously. The addition of CN effectively resulted in the decrease of grain sizes and slightly improved uniformity of grains in BCZT ceramics. Moreover, the results revealed that the addition of CN significantly improved the sinterability of BCZT ceramics which resulted in a reduction of sintering temperature from 1450 to 1400 °C without sacrificing the high piezoelectric properties. Achieving a polymorphic phase transition point at room temperature about 20 °C could improve the piezoelectric properties of BCZT-1000xCN ceramics. Main piezoelectric parameters of BCZT-1000xCN ceramics were optimized around x = 0.01 with a high piezoelectric coefficient (d33 = 550 pC/N), a planar electromechanical coefficient kp of 50%, a remnant polarization (Pr = 12.6 μC/cm2), a high dielectric constant (εrmax = 6056) and a low dissipation factor (tanδ = 1.55%) at 1 kHz, indicating promising applications for lead-free piezoelectric ceramics.

High Piezoelectric D33 Coefficient of Lead-Free (ba0.93ca0.07)(ti0.95zr0.05)o3 Ceramics Sintered at Optimal Temperature

High Piezoelectric D33 Coefficient in (ba1−xcax)(ti0.98zr0.02)o3 Lead-Free Ceramics with Relative High Curie Temperature

Temperature Stability in Dy-Doped (Ba0.99ca0.01)(ti0.98zr0.02)o-3 Lead-Free Ceramics with High Piezoelectric Coefficient

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Piezoelectric and Dielectric Properties of (Ba1−xCax)(Ti0.95Zr0.05)O3 Lead-Free Ceramics: Rapid Communications of the American Ceramic Society

Large Piezoelectric Coefficient in (ba1−xcax)(ti0.96sn0.04)o3 Lead‐Free Ceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

High Piezoelectricity Due to Multiphase Coexistence in Low-Temperature Sintered (ba,ca)(ti,sn)o3–cuox Ceramics

Enhanced high-temperature piezoelectric properties of Bi(Zn0.5Ti0.5)O3-modified BiFeO3–BaTiO3 ceramics

Correlation Between the Microstructure and Electrical Properties in High‐Performance (ba0.85ca0.15)(zr0.1ti0.9)o3 Lead‐Free Piezoelectric Ceramics

Low temperature sintering and role of room-temperature phase transition in the electrical properties of (Ba0.85Ca0.15)(Zr0.10Ti0.90)1−x(Cu1/3Nb2/3)xO3 ceramics

Enhanced Piezoelectric Properties of (ba1−xcax)(ti0.92sn0.08)o3 Lead‐Free Ceramics

Decreasing sintering temperature for BCZT lead-free ceramics prepared via hydrothermal route

Polymorphic Phase Transition and Piezoelectric Properties of (ba1−xcax)(ti0.9zr0.1)o3 Lead-Free Ceramics

High-stability Quinary Lead-Based Piezoelectric Ceramics with High Piezoelectric Properties

Dielectric And Piezoelectric Properties Of Ba(Zrxti1-X)O-3 Lead-Free Ceramics

Preparation and properties of (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 lead-free ceramics via vat photopolymerization

Enhanced Ferroelectric Properties in (ba1−xcax)(ti0.94sn0.06)o3 Lead-Free Ceramics

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Enhanced Temperature Stability in Tb-doped (ba0.99ca0.01)(ti0.98zr0.02)o3 Lead Free Ceramics

Ultra‐high‐temperature piezoelectric responses and ultra‐high thermal stability of piezoelectricity in ceramic PbZr 0.54 Ti 0.46 O 3