Abstract:The (1 − x)(Li 0.03 Na 0.5 K 0.47 )(Nb 0.92 Sb 0.05 Ta 0.03 )O 3 –xBa 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (LNKNST–BCZT, x = 0, 0.5, 1.5, 2.5, and 3.5%) lead-free piezoceramics were synthesized by the conventional solid-state reaction method with adding nano-sized Ba 0.85 Ca 0.15 Zr 0.1 Ti 0.9 O 3 (BCZT) powder to investigate their influences on crystal structure and electrical properties. The X-ray diffraction (XRD) analysis reveals that all the sintered LNKNST–BCZT ceramics exhibit pure perovskite structure with the mainly rhombohedral (R) phase or the coexistence of rhombohedral (R) phase and tetragonal (T) phase. The composition of the LNKNST–1.5%BCZT ceramics locates around the critical point, i.e., the ceramics changing from the coexistence of rhombohedral (R) phase and tetragonal (T) phase to purely rhombohedral (R) phase, and presents the most densified microstructure morphology, which can be confirmed further by the field emission scanning electron microscope (FESEM) observation. There are two dielectric anomalies in the temperature dependent dielectric properties curves of the LNKNST–BCZT ceramics, which correlate with the ferroelectric rhombohedral (R) phase changing to the ferroelectric tetragonal (T) phase, and then to the paraelectric cubic (C) phase. Both the Curie–Weiss law and the power law fittings confirm the diffuse phase transition ferroelectrics characteristic of the LNKNST–1.5%BCZT ceramics, which is considered as correlating with the polar nanoregions (PNRs). Due to the densification effect caused by the chosen amount of nano-sized BCZT doping and the construction of R–T polymorphic phase boundary, the LNKNST–1.5%BCZT ceramics exhibit the best ferroelectric and piezoelectric properties. The complex impedance spectroscopy analysis confirms that the extrinsic electrical conduction mechanism at high temperatures is dominated by the oxygen vacancies induced by the evaporation of the alkali metals during sintering.

Enhanced Ferroelectric Properties in (ba1−xcax)(ti0.94sn0.06)o3 Lead-Free Ceramics

Large Piezoelectric Coefficient in (ba1−xcax)(ti0.96sn0.04)o3 Lead‐Free Ceramics

Enhanced Electric-Field-induced Strain in 0.7bi(1−x)smxfeo3–0.3batio3 Lead-Free Ceramics

Polymorphic Phase Transition and Enhanced Piezoelectric Properties in (ba0.9ca0.1)(ti1−xsnx)o3 Lead-Free Ceramics

Piezoelectric and Dielectric Properties of (Ba1−xCax)(Ti0.95Zr0.05)O3 Lead-Free Ceramics: Rapid Communications of the American Ceramic Society

Polymorphic Phase Transition and Piezoelectric Properties of (ba1−xcax)(ti0.9zr0.1)o3 Lead-Free Ceramics

Enhanced Piezoelectric Properties of (ba1−xcax)(ti0.92sn0.08)o3 Lead‐Free Ceramics

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Phase transition and electrical properties of Ba 0.7 Ca 0.3 TiO 3- BiFeO 3 ceramics

Phase Transition and High Piezoelectricity in (ba,ca)(ti1−xsnx)o3 Lead-Free Ceramics

Preparation and Characterization on Piezo-/Ferro-electric Properties Of(1-X)(knn+lt)+xbi Ceramics

Ferroelectric and Piezoelectric Properties of 0.82(bi0.5na0.5) TiO3-(0.18-x)BaTiO3-x(Bi0.5Na0.5)(Mn1/3Nb2/3)O3 Lead-Free Ceramics

Ferroelectric, dielectric and pyroelectric properties of Sr and Sn codoped BCZT lead free ceramics

High Piezoelectric D33 Coefficient in (ba1−xcax)(ti0.98zr0.02)o3 Lead-Free Ceramics with Relative High Curie Temperature

High Piezoelectric D33 Coefficient of Lead-Free (ba0.93ca0.07)(ti0.95zr0.05)o3 Ceramics Sintered at Optimal Temperature

Structural and dielectric properties in the (Ba 1-xCa x)(Ti 0.95Zr 0.05)O 3 ceramics

Piezoelectric and strain properties of strontium-doped BZT-BCT lead-free ceramics

ELECTRICAL AND MECHANICAL PROPERTIES OF (1-X)(bi1/2na1/2)0.900ba0.088sr0.012tio3-x(bi1/2k1/2)tio3lead-free PIEZOELECTRIC CERAMICS

Enhancement of the temperature stabilities in yttrium doped (Ba 0.99Ca 0.01)(Ti 0.98Zr 0.02)O 3 ceramics

Structures and Temperature-Dependent Electrical Properties in Ba0.8Sr0.2TiO3–BiAlO3 Electrostrictive Ceramics