Recovery of cobalt from spent lithium ion batteries using sulphuric acid leaching followed by solid–liquid separation and solvent extraction

Feng Wang,Rong Sun,Jun Xu,Zheng Chen,Ming Kang
DOI: https://doi.org/10.1039/c6ra16801a
IF: 4.036
2016-01-01
RSC Advances
Abstract:Herein, the method of hydrometallurgy is adopted to recycle the precious metal cobalt in spent lithium ion batteries (LIBs). The best experimental conditions for leaching cobalt ions in sulphuric acid-hydrogen peroxide system are studied. The best leaching operation condition is an H2SO4 concentration of 3.0 mol L-1, liquid-solid ratio of 7 : 1 and hydrogen peroxide dosage of 1.6 mL g(-1) for 2.5 h at 70 degrees C. Using the extraction characteristics of D2EHPA (di-(2-ethylhexyl) phosphoric acid) and PC-88A (2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester) for a specific ion in different pH value leaching solutions, the best experimental conditions are D2EHPA and PC-88A saponification rates of 20% and 30%, respectively, sulfonated kerosene volume of 70%, oil-water (O/A) ratio of 1 : 1, and extraction time of 10 min. Two extractions are applied, the first extraction occurs at pH 2.70 and the second extraction is done at pH 2.60 using D2EHPA to remove copper and manganese ions. After the extraction operation, PC-88A is used to further extract the leaching solution and maintain the pH at 4.25, so that cobalt and nickel ions are effectively separated, then cobalt ions are separated by oxalic acid and cobalt oxalate is obtained. The purity of cobalt is as high as 99.50%.
What problem does this paper attempt to address?