Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Portable X-ray Photography of Solid Concentration in GasSolids Fluidized Beds — (I) Principle and Image Processing

Portable X ray photography of solid concentration in gas solids fluidized beds (II) Application and deviation analysis

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Measurement of Bed Level in Gas-Solid Fluidized Bed by Ultrasonic Technique

Study on Voidage Measurement of Gas-solid Fluidized Bed by Using Electrical Capacitance Tomography

Particle Velocity on Solid-Propellant Surface Using X-Ray Real-Time Radiography

A Visual Study of the Gas Solid Dual Phase Flow Characteristics in a Circulating Fluidized Bed

Measurement Techniques of Solids Concentration and Solids Velocity in Circulating Fluid Beds Riser

An Automatic Method for Measuring Solids Flux in High Density Gas-solids Two-phase Flow

Application of phosphor tracer technique to the measurement of solid RTD in circulating fluidized bed

Developing a Novel Fibre High Speed Photography Method for Investigating Solid Volume Fraction in a 3D Spouted Bed

Evaporation in Particle Packed Bed Measured Using Microfocus X-CT Dynamic Imaging

Measuring Concentration at the Exit Zone in Circulating Fluidized Bed Boiler by Image Techniques

Dispersion of lateral and axial solids in a cocurrent downflow circulating fluidized bed

X-ray Computed Tomography (XCT) Study of Jetting in a Fluidized Bed: Measurement Method Development and Single Component Fluidization

An XCT study on three-dimensional characteristics of a spout-fluid bed

Quantitative Measurement of Solids Holdup for Group A and B Particles Using Images and Its Application in Fluidized Bed Reactors

Measurements on the Local Solids Concentration in the Lower Part of a Circulating Fluidized Bed Riser

Solid Concentration Distribution in a Gas-Solid Fluidized Bed

Radial solids fraction profiles in inlet region of high density circulating fluidized bed