Abstract:We report a newly developed technique for the in situ real-time gas analysis of reactors commonly used for the production of nanomaterials, by showing case-study results obtained using a dedicated apparatus for measuring the gas composition in reactors operating at high temperature (<1000 °C). The in situ gas-cooled sampling probe mapped the chemistry inside the high-temperature reactor, while suppressing the thermal decomposition of the analytes. It thus allows a more accurate study of the mechanism of progressive thermocatalytic cracking of precursors compared to previously reported conventional residual gas analyses of the reactor exhaust gas and hence paves the way for the controlled production of novel nanomaterials with tailored properties. Our studies demonstrate that the composition of the precursors dynamically changes as they travel inside of the reactor, causing a nonuniform growth of nanomaterials. Moreover, mapping of the nanomaterials reactor using quantitative gas analysis revealed the actual contribution of thermocatalytic cracking and a quantification of individual precursor fragments. This information is particularly important for quality control of the produced nanomaterials and for the recycling of exhaust residues, ultimately leading toward a more cost-effective continuous production of nanomaterials in large quantities. Our case study of multiwall carbon nanotube synthesis was conducted using the probe in conjunction with chemical vapor deposition (CVD) techniques. Given the similarities of this particular CVD setup to other CVD reactors and high-temperature setups generally used for nanomaterials synthesis, the concept and methodology of in situ gas analysis presented here does also apply to other systems, making it a versatile and widely applicable method across a wide range of materials/manufacturing methods, catalysis, as well as reactor design and engineering.

Portable X ray photography of solid concentration in gas solids fluidized beds (II) Application and deviation analysis

Portable X-ray Photography of Solid Concentration in GasSolids Fluidized Beds — (I) Principle and Image Processing

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Measurement of Bed Level in Gas-Solid Fluidized Bed by Ultrasonic Technique

Measurement of Flow Pattern and Bed Level of Gas-solid Fluidized Bed in Borstar Process by Acoustic Emission Technique

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Study on Voidage Measurement of Gas-solid Fluidized Bed by Using Electrical Capacitance Tomography

Quantitative Imaging Of Gd Nanoparticles In Mice Using Benchtop Cone-Beam X-Ray Fluorescence Computed Tomography System

Application of phosphor tracer technique to the measurement of solid RTD in circulating fluidized bed

Evaporation in Particle Packed Bed Measured Using Microfocus X-CT Dynamic Imaging

An XCT study on three-dimensional characteristics of a spout-fluid bed

Measurement of Two-Phase Flow: Static CT System Based on Carbon Nanotubes

Dispersion of lateral and axial solids in a cocurrent downflow circulating fluidized bed

Fundamental Research on the Size and Velocity Measurements of Coal Powder by Trajectory Imaging

An Automatic Method for Measuring Solids Flux in High Density Gas-solids Two-phase Flow

Design and Experimental Study on the Pulverized Coal Concentration Sensor Based on Gamma-Ray Absorption Method

Combing mobile electrical capacitance tomography with Fourier neural operator for 3D fluidized beds measurement

Versatile in situ gas analysis apparatus for nanomaterials reactors