Abstract:Improving the thickness of superconducting layer in coated conductors is an effective way to enhance its critical current. In this work, tri-layer YBCO/YBCO/YDyBCO films were successfully deposited on buffered Hastelloy substrate using the multi-coating lowfluorine metal-organic decomposition (LF-MOD) method and the thickness of the films can be up to 2.4 mu m. The effects of high-temperature annealing time on microstructures and superconducting properties of the films were systematically studied. Energy dispersive X-ray spectroscopy (EDS) results reveal that there remains a large amount of F element in the upper layer of the film when the annealing time is too short. With increasing the annealing time, the fluoride-containing precursor converts to YBCO grains completely. But the coarsening of grains appeared, and the critical current density (J (c)) of the film dropped slightly when the annealing time is too long. The cross-sectional scanning electron microscope (SEM) image and EDS plane analysis were applied to investigate the microstructure and element distribution of the final triple-layer YBCO films, respectively. The critical current of the final YBCO superconducting film could reach 316 A (77 k, self-field) for 1.2-cm-wide tapes with the optimal annealing conditions.

THE COATED SUPERCONDUCTOR FILM OF YBa2Cu3O7-δ PREPARED BY COLLOIDAL PROCESSING

MOCVD Preparation of YBCO Coated Conductors on CeO2/YSZ/Y2O3 Buffered RABiTS Substrate

YBCO Superconducting Film Coated on LaAlO 3 Substrate by TFA-MOD Process

Preparation of YBa2Cu3O7−δ Films by MOD Method Using Trifluoroacetate As Precursor

A New Direct Process to Prepare YBa2Cu3O7- films on Biaxially Textured Ag{110}<211>

Double-sided Reel-to-reel Metal-Organic Chemical Vapor Deposition System of YBa2Cu3O7-δ Thin Films

Preparation of Superconducting Yba2cu3o7-X Films on Metallic Substrates by Pulsed Laser Deposition

Preparation of YBCO superconducting thick films On MgO substrates by modified melt growth process

Transient Liquid Assisted Nucleation Mechanism of YBa 2 Cu 3 O 7− Δ in Coated Conductor Films Derived by BaF 2 Process

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Polymer Assisted Thick Single-Layer YBa 2 Cu 3 O 7-Δ Films Prepared with Modified TFA-MOD Method

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Mod-derived YBa2Cu3O7-δ thin filmsusing a fast pyrolysis process

MOCVD Derived Double-Sided YBa2Cu3O7−δ Films on Y2O3/YSZ/CeO2 Buffered Textured Metal Substrates

Fabrication and Analysis of Tri-layer YBaCu Thick Films by Low-Fluorine MOD Method

Rapid preparation of cobalt doped GdBa2Cu3O7-δ films by non-fluorine chemical solution deposition method

Preparation of Yba2cu3o7-X Superconducting Thin-Films over Large Area Substrates

Preparation of YBCO high temperature superconductor films on MgO substrates

Carbon Dioxide Controlled Thermal-Decomposition Reactions for Preparation of High Quality YBCO Films Derived from Fluorine-Free Solution

Effects of Cu/Ba Ratio in Precursor on MOCVD-Deposited YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-x</sub> Films on YYC Buffered Ni-W Alloy Tape