Abstract:Ion beam-assisted deposition (IBAD) has been proposed as a promising texturing technology that uses the film epitaxy method to obtain biaxial texture on a non-textured metal or compound substrate. Magnesium oxide (MgO) is the most well explored texturing material. In order to obtain the optimal biaxial texture, the actual thickness of the IBAD-MgO film must be controlled within 12nm. Due to the bombardment of ion beams, IBAD-MgO has large lattice deformation, poor texture, and many defects in the films. In this work, the solution deposition planarization (SDP) method was used to deposit oxide amorphous Y2O3 films on the surface of Hastelloy C276 tapes instead of the electrochemical polishing, sputtering-Al2O3 and sputtering-Y2O3 in the commercialized buffer layer. An additional homogeneous epitaxy MgO (epi-MgO) layer, which was used to improve the biaxial texture in the IBAD-MgO layer, was deposited on the IBAD-MgO layer by electron-beam evaporation. The effects of growth temperature, film thickness, deposition rate, and oxygen pressure on the texture and morphology of the epi-MgO film were systematically studied. The best full width at half maximum (FWHM) values were 2.2° for the out-of-plane texture and 4.8° for the in-plane texture for epi-MgO films, respectively. Subsequently, the LaMnO3 cap layer and YBa2Cu3O7-x (YBCO) functional layer were deposited on the epi-MgO layer to test the quality of the MgO layer. Finally, the critical current density of the YBCO films was 6 MA/cm2 (77 K, 500 nm, self-field), indicating that this research provides a high-quality MgO substrate for the YBCO layer.

PREPARATION OF YBCO COATED CONDUCTORS THROUGH DIFFERENT HEAT-TREATMENT PROCESS AND RESEARCH ON THEIR PROPERTIES

RECENT PROGRESS IN COATED CONDUCTORS BY IBAD METHOD AND THE PREPARATION OF LONG YSZ/HASTELLOY SUBSTRATES

Low-cost YBCO coated conductor technology

THE COATED SUPERCONDUCTOR FILM OF YBa2Cu3O7-δ PREPARED BY COLLOIDAL PROCESSING

Preparation and characterization of solution deposition planarized Y2O3–Al2O3 compound seed layer for coated conductors

AG DOPING EFFECTS OF YBCO BY LOW FLUORINE MOD METHOD

A New Direct Process to Prepare YBa2Cu3O7- films on Biaxially Textured Ag{110}<211>

Preparation of high crystalline YBCO superconducting thin films by PLD

Production of Long YBCO-coated Conductors using the TFA-MOD Method

Preparation of enhanced Jc YBCO bulks by powder melting process with a combination of submicron 211 precursor and Pt addition

Ion Beam Structure Modification of YBa2Cu3O7−x Coated Conductors Prepared by Solution Techniques

Preparation of MgO Self-Epitaxial Films for YBCO High-Temperature Coated Conductors

Study On The Technology And Property For Y2bacuo5 Particles Artificial Doping To Obtain Single-Crystal Domain Melt-Textured Ybco Bulk Superconductor

Cost-effective and High-Rate Process for Solution-Drived YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7-&#x03B4;</inf> Coated Conductors

Property Improvement of 600-Nm-thick YBCO Superconducting Films Fabricated Using a Pb-Modified MOD Method

STUDY OF THE PREPARATION OF HIGH Tc SUPERCONDUCTING YBCO THIN FILMS BY A PLASMA-ASSISTED MOCVD PROCESS

[Raman spectra of YBCO superconductor with hot ultrapressing treatment]

Preparation of YBCO superconducting thick films On MgO substrates by modified melt growth process

Microstructure and superconducting properties of (BaTiO3, Y2O3)-doped YBCO films under different firing temperatures

Bilayers of YDyBCO+Dy211/ YDyBCO for high performance coated conductors derived by metallorganic solution deposition

Improved Superconducting Performance of YBCO-Coated Conductors by Low Energy Density Argon Ion Etching