Abstract:In this work, the effect of Cu addition and heat treatment schemes on the microstructural evolution, mechanical properties, and corresponding strengthening mechanism of cast Al-Li-Mg alloy were investigated. Results indicate that the dendritic segregation would be induced after the introduction of Cu, and a well-designed two-stage solution treatment could effectively dissolve secondary phases. With Cu addition, aging hardening responses of the alloys were accelerated, accompanied by a continuous increase in the volume fraction of both S'-Al2 CuMg and Al3 Li phases, which enhanced the precipitation strengthening effect. Furthermore, in Cu-containing alloys, both the coarsening of Al3 Li phases and the expansion of Al3 Li-precipitation free zones (PFZ) were inhibited during the aging process. However, severe strain accumulation was found at the interface between the coalesced S' phase and alpha-Al matrix, which reduced the ductility of the alloy. A good combination of strength and ductility (YS = 308 MPa, UTS = 428 MPa, EL = 5.0 %) was obtained in the Al-2.5Li-2Mg-1Cu-0.12Zr alloy aged at 175 degrees C for 32 h due to the narrowed Al3 Li-PFZ and the synergistic strengthening of Al3 Li and S' phase. This work is expected to provide guidelines for designing novel cast Al-Li alloys with wider applications. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Tensile Properties and Work-Hardening Behaviours of Al–Cu Alloys Modified by Al84Ni10La6metallic Glass

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Formation of Cu–Zr–Al Bulk Metallic Glass Composites with Improved Tensile Properties

Age Hardening and Mechanical Properties of Cast AlCu Alloy Modified by La and Pr

Pronounced Ductility in CuZrAl Ternary Bulk Metallic Glass Composites with Optimized Microstructure Through Melt Adjustment

Study on Microstructure and Mechanical Properties of Al-Mg-Si-Cu Aluminium Alloy with High Ductility

Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites

High Tensile Plasticity and Strength of a CuZr-based Bulk Metallic Glass Composite

Structure and properties of Zr–Ta–Cu–Ni–Al bulk metallic glasses and metallic glass matrix composites

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Research on High-Al Cu-Zr-Al-Y Bulk Metallic Glass and Its Composites

Microstructure, Mechanical Properties and Corrosion Behaviors of Al–Li–Cu–Mg–Ag–Zn Alloys

Effect of alloying Cu on the microstructure and properties of Al-Si-Sr-Ti alloy

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Composition Dependence of the Microstructure and Mechanical Behavior of Ti–Zr–Cu–Pd–Sn–Nb Bulk Metallic Glass Composites

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Improved strength and conductivity of metallic-glass-reinforced nanocrystalline CuCrZr alloy

Effects of La addition on the mechanical properties and thermal-resistant properties of Al–Mg–Si–Zr alloys based on AA 6201

Effect of Solution and Aging Treatment on Microstructure and Mechanical Properties of Al–14Si–5Cu–1.1Mg–2.3Ni–0.3La Alloy

Criteria for tensile plasticity in Cu–Zr–Al bulk metallic glasses

Microstructural Tailoring and Improvement of Mechanical Properties in CuZr-based Bulk Metallic Glass Composites