Abstract:The effect of composition tuning on glass forming ability (GFA), mechanical properties and atomic structure in ZrxCo84−xAl16 bulk metallic glasses (BMGs) with x = 51–58 has been investigated by using copper-mold suction casting, nanoindentation, high-energy X-ray diffraction, extended X-ray absorption fine structure experiments and ab initio molecular dynamics simulations, respectively. It is found that GFA firstly increases then decreases with increasing Zr content, exhibiting a maximum diameter of 7 mm with the Zr content of 55 and 56, while an abrupt reduction of bending plasticity occurs as the Zr content drops below 55. Both experimental and theoretical results find that GFA is remarkably enhanced, due to the abnormal reduction in the fractions of the Co-centered ⟨0, 2, 8, 1⟩, ⟨0, 3, 6, 2⟩ and ⟨0, 3, 6, 3⟩ polyhedra, and the denser atomic packing of Zr atoms around center Co atom, as the Zr content increases from 51 to 56. Meanwhile, the simultaneously improved plasticity is associated with the increased Co-centered ⟨0, 3, 6, 0⟩, and Al-centered ⟨0, 2, 8, 1⟩ and ⟨0, 3, 6, 2⟩ polyhedra, which provide more fertile sites for the nucleation of shear transformations. Further Zr addition to 58 increases remarkably the fractions of Zr- and Al-centered ⟨0, 1, 10, 2⟩ and ⟨0, 3, 6, 4⟩ polyhedra, and causes looser atomic packing of Co atoms around center Zr atom, leading to the reduction in GFA. However, the plasticity is not enhanced further but remains nearly constant, which may be related to the deteriorated effect on plasticity of the decreased fractions of Zr-centered ⟨0, 1, 10, 5⟩ and Co-centered ⟨0, 3, 6, 0⟩ polyhedra, and the increased fractions of Zr-centered ⟨0, 1, 10, 3⟩ and ⟨0, 2, 8, 4⟩ and Co-centered ⟨0, 2, 8, 0⟩ polyhedra. Compositional tuning, with internal structure tuned to favor both GFA and plastic flow, offers new possibilities in developing ductile BMG materials.

Criteria for tensile plasticity in Cu–Zr–Al bulk metallic glasses

Plasticity and microstructure of Zr–Cu–Al bulk metallic glasses

Enhancement of Plasticity in Zr-based Bulk Metallic Glasses

Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing

Structural Evolution in Bulk Metallic Glass under High-Temperature Tension

Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites

Mechanical Properties of Monolithic Zr62Al8Ni13Cu17 Bulk Metallic Glass

Enhanced Plasticity in Zr–Cu–Ag–Al–Be Bulk Metallic Glasses

Enhanced mechanical properties of Zr65Cu15Ni10Al10 bulk metallic glass by simultaneously introducing surface grooves and multiple shear bands

A Plastic Zr–Cu–Ag–Al Bulk Metallic Glass

Tensile Elastic Behavior of A Zr-Cu-Ag-Al Bulk Metallic Glass

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Glass forming ability and bending plasticity evolutions in Zr-Co-Al bulk metallic glasses and their structural origin

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Structure and properties of Zr–Ta–Cu–Ni–Al bulk metallic glasses and metallic glass matrix composites

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

High temperature deformation behaviors of a CuZr-based bulk metallic glass composite

Local Strain Behavior of Bulk Metallic Glasses under Tension Studied by in Situ X-Ray Diffraction

Co Content Effect on Elastic Strain Limit in ZrCuNiAlCo Bulk Metallic Glasses

Locating bulk metallic glasses with high fracture toughness: Chemical effects and composition optimization

Deformation behavior of thermally rejuvenated Zr-Cu-Al-(Ti) bulk metallic glass