Abstract:Gasification, a highly efficient method, is under extensive investigation due to its potential to convert biomass and plastic waste into eco-friendly energy sources and valuable fuels. Nevertheless, there exists a gap in comprehension regarding the integrated thermochemical process of polystyrene (PS) and polypropylene (PP) and its capability to produce hydrogen (H 2 ) fuel. In this study a comprehensive process simulation using a quasi-equilibrium approach based on minimizing Gibbs free energy has been introduced. To enhance H 2 content, a water-gas shift (WGS) reactor and a pressure swing adsorption (PSA) unit were integrated for effective H 2 separation, increasing H 2 production to 27.81 kg/h. To investigate the operating conditions on the process the effects of three key variables in a gasification reactor namely gasification temperature, feedstock flow rate and gasification pressure have been explored using sensitivity analysis. Furthermore, several machine learning models have been utilized to discover and optimize maximum capacity of the process for H 2 production. The sensitivity analysis reveals that elevating the gasification temperature from 500 °C to 1200 °C results in higher production of H 2 up to 23 % and carbon monoxide (CO). However, generating H 2 above 900 °C does not lead to a significant upturn in process capacity. Conversely, an increase in pressure within the gasification reactor is shown to decrease the system capacity for generating both H 2 and CO. Moreover, increasing the mass flow rate of the gasifying agent to 250 kg/h in the gasification reactor has shown to be merely productive in process capacity for H 2 generation, almost a 5 % increase. Regarding pressure, the hydrogen yield decreases from 22.64 % to 17.4 % with an increase in pressure from 1 to 10 bar. It has been also revealed that gasification temperature has more predominant effect on Cold gas efficiency (CGE) compared to gasification pressure and Highest CGE Has been shown by PP at 1200 °C. Among the various machine learning models, Random Forest (RF) model demonstrates robust performance, achieving R 2 values exceeding 0.99.

Augmented Hydrogen Production by Gasification of Ball Milled Polyethylene with Ca(OH)2 and Ni(OH)2

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

High-yield H2 production from polypropylene through pyrolysis-catalytic reforming over activated carbon based nickel catalyst

High-Yield H2 Production from Hdpe Through Integrated Pyrolysis and Plasma-Catalysis Reforming Process

Hydrogen Production by Pyrolysis–Nonthermal Plasma/Catalytic Reforming of Waste Plastic over Different Catalyst Support Materials

Upcycling Polyethylene to High‐Purity Hydrogen under Ambient Conditions via Mechanocatalysis

Hydrogen-rich syngas production by catalytic cracking of polypropylene over activated carbon based monometallic and bimetallic Fe/Ni catalysts

Nitrogen-doped Ni3P–NiMoO4 Heterostructure Arrays for Coupling Hydrogen Production with Polyethylene Terephthalate Plastic Electro-Recycling

High-purity H2 Production from Mixed PVC/PET Plastic Wastes Through Tandem Hydrothermal Depolymerization and Aqueous Phase Reforming

Experimental Study on Pyrolysis/gasification of Biomass and Plastics for H2 Production under New Dual-Support Catalyst

Hydrogen production from plastic waste: A comprehensive simulation and machine learning study

Coking-resistant NiO@CeO 2 catalysts derived from Ce-MOF for enhanced hydrogen production from plastics

Enhanced Hydrogen Production by the Catalytic Alkaline Thermal Gasification of Cellulose with Ni/Fe Dual-Functional CaO Based Catalysts

Nitrogen-doped Ni 3 P–NiMoO 4 heterostructure arrays for coupling hydrogen production with polyethylene terephthalate plastic electro-recycling

H2 Production from Co-Pyrolysis/gasification of Waste Plastics and Biomass under Novel Catalyst Ni-CaO-C

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

Catalytic reforming of polypropylene to produce hydrogen: Influence of support characteristics and active metal type in catalyst

Microwave-assisted Chemical Looping Gasification of Plastics for H2-rich Gas Production

Hydrogen Production by Three-Stage (i) Pyrolysis, (ii) Catalytic Steam Reforming, and (iii) Water Gas Shift Processing of Waste Plastic

Hydrogen from Cellulose and Low-density Polyethylene via Atmospheric Pressure Nonthermal Plasma