Abstract:Chlorine (Cl)-containing chemicals, including hydrogen chloride, generated during thermal degradation of polyvinyl chloride (PVC) and corresponding mixture impede the chemical recycling of PVC-containing plastic wastes. While upgrading plastic-derived vapors, the presence of Cl-containing chemicals may deactivate the catalysts. Accordingly, herein, catalytic upgrading of pyrolysis vapor prepared from a mixture of PVC and polyolefins is performed using a fixed-bed reactor comprising zeolites. Among the H-forms of zeolites (namely, ZSM-5, Y, β, and chabazite) used in this study, a higher yield of gas products composed of hydrocarbons with lower carbon numbers is obtained using H-ZSM-5, thus indicating further decomposition of the pyrolysis vapor to C1-C4 hydrocarbons on it. Although the formation of aromatic compounds is better on H-ZSM-5, product distributions can be adjusted by further modifying the acidic properties via the alteration of the Si/Al molar ratio, and maximum yields of C1-C4 compounds (60.8%) and olefins (64.7%) are achieved using a Si/Al molar ratio of 50. Additionally, metal ion exchange on H-ZSM-5 is conducted, and upgrading of PVC-containing waste-derived vapor to aromatic chemicals and small hydrocarbon molecules was successfully performed using Co-substituted H-ZSM-5. It reveals that the highest yield of gas products on 1.74 wt% cobalt (Co)-substituted H-ZSM-5 is acquired via the selection of an appropriate metal and metal ion concentration adjustment. Nevertheless, introduction of excess Co into the H-ZSM-5 surface decreases the cracking activity, thereby implying that highly distributed Co is required to achieve excellent cracking activity. The addition of Co also adjusted the acid types of H-ZSM-5, and more Lewis acid sites compared to Brønsted acid sites selectively produced olefins and naphthenes over paraffins and aromatics. The proposed approach can be a feasible process to produce valuable petroleum-replacing chemicals from Cl-containing mixed plastic wastes, contributing to the closed loops for upcycling plastic wastes.

High-purity H2 Production from Mixed PVC/PET Plastic Wastes Through Tandem Hydrothermal Depolymerization and Aqueous Phase Reforming

Efficient H2 Production from PET Plastic Wastes over Mesoporous Carbon-Supported Ru-ZnO Catalysts in a Mild Pure-Water System

Low-temperature upcycling of PET waste into high-purity H2 fuel in a one-pot hydrothermal system with in situ CO2 capture

Low-Temperature Upcycling of Polypropylene Waste into H2 Fuel Via a Novel Tandem Hydrothermal Process

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Converting waste PET plastics into automobile fuels and antifreeze components

Electrocatalytic upcycling of polyethylene terephthalate to commodity chemicals and H2 fuel

Preparation of monocyclic aromatic hydrocarbons from chlorine-containing mixed waste plastics via tandem catalysis coupled with hydrothermal pretreatment

Complete Hydrogenolysis of Mixed Plastic Wastes

Upcycling Polyethylene to High‐Purity Hydrogen under Ambient Conditions via Mechanocatalysis

Chemical upcycling of PVC-containing plastic wastes by thermal degradation and catalysis in a chlorine-rich environment

Catalytic Transformation of PET and CO2 into High‐Value Chemicals

Photovoltaic-driven electrocatalytic upcycling poly(ethylene terephthalate) plastic waste coupled with hydrogen generation

Reinforcing the Efficiency of Plastic Upgrading through Full‐Spectrum Photothermal Effect Integration of Heat Isolator

Selective hydrodeoxygenation of polyethylene terephthalate plastic wastes into 1,4-dimethylcyclohexane by Ir-ReOx/SiO2 + HZSM-5 catalytic system

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

Photoelectrochemical conversion of plastic waste into high-value chemicals coupling hydrogen production

Pyrolysis-plasma/catalytic reforming of post-consumer waste plastics for hydrogen production

Catalytic Reforming of the Aqueous Phase Derived from Diluted Hydrogen Peroxide Oxidation of Waste Polyethylene for Hydrogen Production

Sustainable Solar-and Electro-Driven Production of High Concentration H2O2 Coupled to Electrocatalytic Upcycling of Polyethylene Terephthalate Plastic Waste

Sustainable waste-treating-waste strategy: Catalytic recycling of polyethylene terephthalate over reconstructed waste catalysts