Abstract:In order to obtain extended storage life of food-grade materials and better barrier properties against environmental factors, a multilayer plastic packaging (MLP) is often used. The multilayer packaging plastics are labelled as "other" (SPI#7) category, and are manufactured with a combination of barrier plastics, rigid plastics and printing surface. Owing to their complex composition and difficulty in separating the layers of MLP, its mechanical recycling is challenging. In this study, MLP wastes (MLPWs) were collected from zero-waste garbage collection center of IIT Madras, India, and thoroughly characterized to determine their composition and plastic types. MLPWs were characterized using various physico-chemical methods such as thermogravimetric/differential scanning calorimetric analysis, Fourier transform infrared spectroscopy, bomb calorimetry, and proximate and ultimate analyses. The MLPWs were mainly made up of polyethylene (PE) and polyethylene terephthalate (PET). Further, the non-catalytic and zeolite-catalyzed fast pyrolysis of these MLPWs were studied using analytical pyrolysis coupled with gas chromatograph/mass spectrometer (Py-GC/MS). The non-catalytic fast pyrolysis of MLPWs primarily produced a mixture of aliphatic and alicyclic hydrocarbons, while zeolite catalyzed fast pyrolysis resulted in the formation of mono-aromatic hydrocarbons (MAHs). The activity of HZSM-5, zeolite Y (HY) and zeolite beta (Hβ) catalysts were evaluated, and the salient products were quantified. The yields of MAHs like benzene, toluene, ethylbenzene and xylene using the zeolites followed the trend: HZSM-5 (14.9 wt%) > HY (8.1 wt%) > Hβ (7.8 wt%), at 650 °C. The use of HZSM-5 resulted in highest yield of MAHs, viz. 16.1 wt%, at the optimum temperature of 550 °C and MLPW-to-catalyst ratio of 1:15 (w/w). The superior activity of HZSM-5 is due to its nominal acidity and larger pore size of 4.24 nm, as compared to HY and Hβ. The MAHs yield from three other types of MLPWs varied in the range of 9-16 wt%. The present study demonstrates a promising pathway for the catalytic upcycling of highly heterogeneous MLPWs in the context of circular economy.

Preparation of monocyclic aromatic hydrocarbons from chlorine-containing mixed waste plastics via tandem catalysis coupled with hydrothermal pretreatment

Tandem pyrolysis catalytic reforming of plastic waste to high-yield monocyclic aromatics by one-step microwave catalysis

Tandem catalytic pyrolysis of mixed plastic packaging wastes to produce BTEX over dual catalysts

Conversion of low-density polyethylene into monocyclic aromatic hydrocarbons through continuous microwave pyrolysis with ex-situ dual-catalyst beds

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

High-purity H2 Production from Mixed PVC/PET Plastic Wastes Through Tandem Hydrothermal Depolymerization and Aqueous Phase Reforming

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Complete Hydrogenolysis of Mixed Plastic Wastes

Catalytic upcycling of post-consumer multilayered plastic packaging wastes for the selective production of monoaromatic hydrocarbons

Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste

Catalytic Pyrolysis of Waste Polyethylene Using Combined CaO and Ga/ZSM-5 Catalysts for High Value-Added Aromatics Production

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Production of light olefins and monocyclic aromatic hydrocarbons from the pyrolysis of waste plastic straws over high-silica zeolite-based catalysts

Chitosan-assisted reassembled hierarchical HZSM-5 for selective production of monocyclic aromatics in catalytic co-pyrolysis of biomass and plastic

Catalytic pyrolysis of plastic wastes in a continuous microwave assisted pyrolysis system for fuel production

Catalytic co-pyrolysis of poplar tree and polystyrene with HZSM-5 and Fe/HZSM-5 for production of light aromatic hydrocarbons

A novel production of monocyclic aromatic hydrocarbons via one-step catalytic conversion of pine sawdust and waste plastics over Pd/trap-HZSM-5

Value added hydrocarbons obtained by pyrolysis of contaminated waste plastics in horizontal tubular reactor: In situ upgrading of the products by chlorine capture

Microwave catalytic co-pyrolysis of low-density polyethylene and spent bleaching clay for monocyclic aromatic hydrocarbons