Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Dualband Filter Using Stub-Loaded Resonators

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Dual-Band Superconducting Bandpass Filter Using Stub-Loaded Resonators with Controllable Coupling and Feeding Structures

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

A Flat-Passband Microstrip Filter With Nonuniform- $Q$ Dual-Mode Resonators

A Modified Dual-Mode Bandpass Filter Using Inductively Slotted Square Resonator Without Coupling Gaps

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Dual‐band Bandpass Filter Using Stepped‐impedance Stub‐loaded Hexagonal Stepped Impedance Resonator (SIR)

Design of novel multiband bandpass filters based on coupled symmetric short‐circuit stub multimode resonators

A novel compact triple-passband filter design based on stepped impedance stub-loaded resonators

Wideband Bandpass Filter with Wide Stopband Using Loaded BCMC Stub and Short-Stub

Modeling and Analyzing High-Order Modes in Periodic-Stub-Loaded Stripline for Wideband Filter Design

Compact Quad-Band BPF Using Quad-Mode Stub Loaded Resonators

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators