Abstract:To satisfy the increasing energy density requirements for electric vehicles and grid-scale energy storage systems, Ni-rich layered oxide cathode materials are often fabricated as micron-sized secondary spherical particles consisting of nanosized single crystals. Unfortunately, the hierarchical structure inevitably induces intergranular cracks and parasitic reactions at the cathode–electrolyte interphase, aggravating chemomechanical instability and seriously hindering their practical application. Here, we propose a nanowelding strategy to build consolidation points at the grain boundary of the primary particles, which dramatically enhances the capacity retention and chemomechanical stability. Meanwhile, the oxygen vacancies in the ceria-based solid electrolyte possessing oxygen adsorbing and storage capability can restrain the active oxygenates in the surficial lattice to avoid oxygen evolution. Experimental characterization further confirms that this unique architecture can effectively prevent the liquid electrolyte from penetrating into the active material along the grain boundary and consequently eliminate the adverse effects, including intergranular cracks, cathode electrolyte interface formation and growth, and the layered structure-rock salt phase irreversible transition. This finding provides a promising approach to realize the rapid commercialization of highly stabilized nickel-rich cathode materials for high-performance lithium-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20100?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20100</a>.SEM images of the "nanowelding" points coating NCM811 samples; EDS spectra of as-prepared samples; dQ/dV versus V plots derived from consecutive cycling of the NCM811 electrode; comparison on the initial Coulomb efficiency, cycling performance and rate performance with those reported in the literature; Rietveld refinement results of NW1, NW2, and NW3 samples and the corresponding structure parameters; XPS spectra and fitting results for obtained samples; EDS mapping of Ni, Co, Mn, and F elements and EDS spectra for cycled NCM811 (a) and NW3 electrodes; and STEM images of NCM811 and NW3 electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20100/suppl_file/am0c20100_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improved Stability of Metal Nanowires Via Electron Beam Irradiation Induced Surface Passivation

Innovative Multiphase Ultrasonic-Assisted Method for High-Purity, Stable, and Cost-Effective Copper Nanowire Synthesis

Comprehensive Stability Improvement of Silver Nanowire Networks via Self-Assembled Mercapto Inhibitors

Tackling the Stability Issues of Silver Nanowire Transparent Conductive Films through FeCl3 Dilute Solution Treatment

Stability and Protection of Nanowire Devices in Air

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Improving Adhesion Strength and Thermal Conductivity of Nanowire Surface Fastener

Enhanced Field Emission from Carbon Nanotubes by Electroplating of Silver Nanoparticles

Controlling the Lithiation-Induced Strain and Charging Rate in Nanowire Electrodes by Coating.

Nanotwinned Microstructure Engineering of Electroplated Copper for Enhanced Anti-corrosion in Alkaline Medium

Comparison Study on the Stability of Copper Nanowires and Their Oxidation Kinetics in Gas and Liquid.

Mechanically Stable and Damage Resistant Freestanding Ultrathin Silver Nanowire Films with Closely Packed Crossed-Lamellar Structure

Protecting the Nanoscale Properties of Ag Nanowires with a Solution-Grown SnO2 Monolayer As Corrosion Inhibitor

Trimethylsilane Plasma-Nanocoated Silver Nanowires for Improved Stability

Enhancing Conductivity of Silver Nanowire Networks through Surface Engineering Using Bidentate Rigid Ligands

Mechanical and Corrosion Resistance Enhancement of Closed-Cell Aluminum Foams through Nano-Electrodeposited Composite Coatings

Improvement of Contact Resistance Between Each Silver Nanowire and Thermal Stability of Silver Nanowire Transparent Electrodes by Electrodeposition

Ultrathin-shell epitaxial Ag@Au core-shell nanowires for high-performance and chemically-stable electronic, optical, and mechanical devices

Enhanced Corrosion Resistance by Engineering Crystallography on Metals

Nanowelding to Improve the Chemomechanical Stability of the Ni-Rich Layered Cathode Materials

Long Term Stability of Nanowire Nanoelectronics in Physiological Environments