Uwe Reinhardt to speak at OR managers' meeting. Interview by Pat Patterson.

U. Reinhardt

1994-09-01

Abstract:

What problem does this paper attempt to address?

Tackling the Stability Issues of Silver Nanowire Transparent Conductive Films through FeCl3 Dilute Solution Treatment

Xikun Chu,Ke Wang,Jingqi Tao,Shuxin Li,Shulin Ji,Changhui Ye

DOI: https://doi.org/10.3390/nano9040533

IF: 5.3

2019-04-03

Nanomaterials

Abstract:Silver nanowires (AgNWs) have been investigated as alternatives to indium tin oxide in transparent conductive films (TCFs) for electronics. However, AgNW TCFs still pose stability issues when exposed to thermal, chemical, and mechanical stimuli. Herein, we demonstrate a facile and effective route to improve stability by treating the films with dilute ferric chloride solution. Our results indicate that after treatment the films exhibit a dramatically enhanced stability against aging, high temperature oxidation, chemical etching, sulfurization, and mechanical straining. Size-dependent instability is fully explored and explained regarding surface atomic diffusion, which could be blocked by enhancing the activation energy of surface diffusion through forming a AgCl cap under ferric chloride solution treatment. Chemisorption-related Fermi level shift of silver nanowires is applied to tune their chemical reactivity to ferric chloride solution for balancing between size-dependent stability improvement and maintaining optoelectrical properties. Owing to the dilute treatment solution, the treated films exhibit a negligible change in light transmittance, whereas sheet resistance decreases by 30% and flexibility increases because of capillary-force-induced welding of contacting AgNWs and AgCl layer mediated tightening. These findings are significant for real-world applications of AgNW TCFs.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

Wenwen Wang,Zhonglin Yang,Yujia Gu,Zelei Wu,Guixin Wang,Guinan Chen,Minchu Huang,Chenhui Xu,Cui Ye,Wang Zhang,Jianwei Nai,Yongwu Peng,Jun Pan,Changhui Ye

DOI: https://doi.org/10.1088/1361-6528/abc1a0

IF: 3.5

2020-11-11

Nanotechnology

Abstract:Abstract Silver nanowires are susceptible to degradation under ultraviolet (UV) light illumination. Encapsulating silver nanowire transparent conductive films (AgNW TCFs) with UV shielding materials usually result in the increasing of the sheet resistance or the decrease of the visible light transparency. Herein, we combine a reducing species (FeSO 4 ) and a thin layer (overcoating) of UV shielding material to solve the stability and the optical performance issues simultaneously. The AgNW TCFs show excellent stability under continuous UV light illumination for 14 h, and their sheet resistance varies only 6%. The dramatic enhancement of the stability against UV light illumination for as-obtained TCFs will make them viable for real-world applications in touch panels and displays.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
The interaction of angiotensin II with heparin.

A. T. Ferreira,A. Paiva

Anais da Academia Brasileira de Ciências

Abstract:
Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles

Ly Thi Trinh,Thi Tu Linh To,Pyeongsam Ko,Kyoohee Woo,Sin Kwon,Jinsung Rho,Hongseok Youn

DOI: https://doi.org/10.1002/smll.202403702

IF: 13.3

2024-08-01

Small

Abstract:This research addresses challenges with silver nanowires (Ag NWs) as transparent conductive electrodes (TCEs) and heaters in commercial devices. Here, zinc oxide nanoparticles (ZnO NPs) are first reported as a protective layer for Ag NWs. Multi-physics simulations confirm enhanced thermal stability due to improved heat dissipation, temperature distribution, and thermal conductivity from ZnO. When Ag NWs are surrounded by air, heat transfers mainly through convection and radiation because of air's low conduction coefficient. Encasing Ag NWs in ZnO enhances heat transfer to the ZnO surface, accelerating cooling and dissipating more heat into the atmosphere via convection. The results show composite's efficiency in the Joule effect, maintaining a consistent temperature of 78 °C for 700 s after 500 bending cycles, a significant improvement over Ag NWs operating for only 5 s at 80 °C. Additionally, the composite film exhibited exceptional performance, including a sheet resistance of 9.8 Ω sq-1 and an optical transmittance of 96.96 %, outperforming Ag NWs, which have a sheet resistance of 12 Ω sq-1 and a transmittance of 94.11%. The combination of enhanced electrical, thermal, and mechanical stability, along with impressive optical properties, makes Ag NWs/ZnO NPs a promising candidate for transparent conductive electrode materials in various applications.
Efficient Protection of Silver Nanowire Transparent Electrodes by All-Biorenewable Layer-by-Layer Assembled Thin Films

Yoo-Bin Kwon,Jae-Ho Kim,Young-Kwan Kim

DOI: https://doi.org/10.1021/acsami.2c02876

2022-06-08

Abstract:An efficient protection strategy for silver nanowire-based transparent electrodes (AgNW TEs) is developed to enhance their poor adhesion force on substrates and thermal, optical, chemical, and electrical stabilities. Chitin nanofibers (CNFs) and alkali lignin (AL), which possess high mechanical property, a gas/moisture barrier, and UV absorption properties, are successively assembled on AgNW TEs through layer-by-layer (LBL) assembly based on their oppositely charged surfaces. The formation of LBL-assembled CNFs and AL (CNF/AL)10 bilayers, where 10 is the optimized number of bilayers, on the aldehyde-modified AgNW (Al-AgNW) TEs does not deteriorate their electrical conductivity (17.3 ± 2.1 Ω/□) and transmittance (90.1 ± 0.3% at 550 nm), and the (CNF/AL)10 bilayer-coated Al-AgNW [(CNF/AL)10@Al-AgNW] TEs present considerable enhancement in their adhesion force and thermal, optical, chemical, and electrical durability. In detail, their optoelectrical properties are stable over 200 cycles of the scotch peel-off test, for 10 h sonication, up to 350 °C, under UV/O3 treatment for 100 min, in 10% HCl and 28% NH3 for 6 and 12 h, and at an electrical potential up to 14 V, respectively. These features make (CNF/AL)10@Al-AgNW TEs suitable as a durable high-performance transparent heater.
Metal-Organic Framework-Modified Silver Nanowire Transparent Film with Enhanced Conductivity and Stability for Efficient Organic Light-Emitting Diodes

Yu Zhao,Wenzhe Huang,Jiachen Kang,Xin Xi,Yuhou Pei,Gufeng He

DOI: https://doi.org/10.1021/acsami.3c06450

IF: 9.5

2023-07-14

ACS Applied Materials & Interfaces

Abstract:Silver nanowire (AgNW) is recognized as a critical material for developing the next generation of transparent conductive films (TCFs); however, poor stability remains a major issue. Herein, we demonstrate a stable AgNW TCF passivated by a metal-organic framework (MOF) via a facile solution process. The MOF is chemically bonded to the surface of the AgNWs as a chemical inhibitor, which contributes to passivating highly active sites and providing chemical protection, leading to enhanced resistance...

materials science, multidisciplinary,nanoscience & nanotechnology
Research progress on the stability of transparent conductive films for silver nanowires

Wanqing You,Bokai Liao,Shan Wan,Xingpeng Guo

DOI: https://doi.org/10.1016/j.microrel.2024.115394

IF: 1.6

2024-04-12

Microelectronics Reliability

Abstract:As a key component in flexible optoelectronic devices, flexible transparent conductive films will become a strategic material in optoelectronic products. Among them, silver nanowire (AgNW) transparent conductive film (TCF) is the most marketable and promising optoelectronic material. However, the nano-size effect makes AgNW TCF less weather-resistant and prone to corrosion in the service occasions, leading to degradation or even failure of the conductivity of optoelectronic devices. Therefore, poor stability is one of the key issues hindering the large-scale industrialization of AgNW TCF. This article focuses on the application scenarios and stability of AgNW TCF: firstly, its related application scenarios in flexible displays, thin-film solar cells, and electromagnetic shielding glass are summarized; then the impact of service environment (environmental pollutants, temperature, humidity, lighting, etc.), mechanical effects, thermoelectric coupling effects on the stability of AgNW TCF are discussed; finally, the optimizing strategies are put forward about how to improve the stability of AgNW TCF. It provides a reference for researchers to improve the stability of AgNW TCF.

engineering, electrical & electronic,nanoscience & nanotechnology,physics, applied
Significantly Improved Stability of PDMS- Packaged Silver Nanowire Film under Multiple Environments

Kaiqing Wang,Jianzhong Wang,Yunxia Jin,Fei Xiao

DOI: https://doi.org/10.1109/icept.2018.8480734

2018-01-01

Abstract:Silver Nanowire (AgNW) transparent conductive film has been widely studied in recent years as alternative to ITO. In spite of the excellent light transmittance, conductivity and flexibility, the weak stability of AgNW film is a severe barrier to its application in electronic devices. However, transparent electrode is packaged when applied in electronic devices. In this work, the effects of package on the stability of AgNW film under multiple environments are tested. We demonstrate that the stability of AgNW film is significantly improved after packaged by PDMS in ambient atmosphere. After annealing at 180 °C for 50 h, the sheet resistance of PDMS-packaged AgNW film increased by 47%, compared to 1100% of pure AgNW film. In harsh environment of high humidity and high temperature, PDMS-packaged AgNW film also performs outstanding stability. When exposed to ultraviolet (UV) irradiation, the pure AgNW film lost conductivity in 40 min, accompanied with the sharp decrease of light transmittance. By contrast, the sheet resistance of PDMS-packaged AgNW film only changed about 20% with nearly unchanged light transmittance. Even at high current density of 250 mA cm -2 , the PDMS-packaged AgNW film exhibited a lifetime 5.8 times that of pure AgNW film. The protective effect of package will promote the application of AgNW film in optoelectronic devices.
Overcoming Temperature‐Induced Degradation of Silver Nanowire Electrodes by an Ag@SnO x Core‐Shell Approach

Violetta Kalancha,Albert These,Lilian Vogl,Ievgen Levchuk,Xin Zhou,Maïssa Barr,Mark Bruns,Julien Bachmann,Sannakaisa Virtanen,Erdmann Spiecker,Andres Osvet,Christoph J. Brabec,Karen Forberich

DOI: https://doi.org/10.1002/aelm.202100787

IF: 6.2

2022-02-05

Advanced Electronic Materials

Abstract:Transparent electrodes consisting of silver nanowires (Ag NWs) are a solution‐processed alternative to commonly used indium tin oxide electrodes. Here, Ag NW electrodes protected by a tin oxide (SnOx) are explored and unprecedented thermal stability is found. While unprotected Ag NW electrodes fail at 250 °C, the SnOx Ag NW electrodes remain stable for 40 h at 250 °C and withstand high temperatures up to 500 °C for short times. First, an optimized method of synthesis that provides uniform Ag NWs with high reproducibility is used. Afterward, a SnOx shell is formed in a wet chemical reaction. Fabrication of highly conductive electrodes requires thermal annealing at 300 °C for 5 min under ambient atmosphere. Electrodes with a sheet resistance as low as 20 Ω sq‐1 and visible transmittance of 84% are demonstrated. It is shown that a ≈2 nm thick SnOx shell effectively protects the Ag NWs in a temperature range between 200 and 500 °C, whereas unprotected Ag NWs suddenly fail at temperatures beyond 200 °C. It is strongly anticipated that these improvements in the stability of Ag NWs open a large field of further investigations and applications. Silver nanowire electrodes protected by a tin oxide shell exhibit unprecedented thermal stability. The ≈2 nm SnOx shell effectively protects the silver nanowires (Ag NWs) at temperature ranges from 200 to 500 °C, whereas unprotected Ag NWs suddenly fail at temperatures beyond 200 °C.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
[Action of anesthesia and surgical trauma on carbohydrate metabolism. Preliminary note: behavior of the blood lactic acid].

A. Pizzoferrato,S. Cini

1961-12-01

Abstract:
Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Yunxia Jin,Dunying Deng,Yuanrong Cheng,Lingqiang Kong,Fei Xiao

DOI: https://doi.org/10.1039/c3nr05820d

IF: 6.7

2014-01-01

Nanoscale

Abstract:As a promising candidate to replace the brittle and expensive transparent indium tin oxide (ITO) conductor, the use of silver nanowire (AgNW) networks still involves issues such as high-temperature post-treatments and poor substrate adhesion for industrial application. Here a room-temperature soldering and one-step solution method is developed to achieve high-performance Ag nanowire transparent conductive films (TCFs). A nonconductive binder is prepared from poly(dopamine) and alginic acid which contains abundant catechol and carboxylic acid functional groups. The drying of the binder on the Ag nanowire percolation networks induces tighter contact among the nanowires and strong adhesion to the substrate, simultaneously enhancing the electrical and mechanical properties without a high-temperature annealing process. As a result, a highly conductive and bendable AgNW film is demonstrated on a low-cost polyethylene glycol terephthalate (PET) substrate, showing an 89% optical transmittance at λ = 550 nm and a sheet resistance of 16.3 Ohm sq(-1). Its optical and electrical performances are superior to those obtained from the reported indium tin oxide (ITO) films. Moreover, the AgNW film exhibits strong adhesion to the substrate, maintaining its conductivity after 100 tape tests, and it still resists the tape test even after exposure to solvent for several hours. Most importantly, the film shows good reliability during long-term 85 °C/85% RH (relative humidity) aging, which has been rarely investigated although it is a critical requirement for industrial application. The advanced and wide-ranging features of the prepared AgNW film greatly contribute to its use as a transparent electrode in multifunctional flexible electronic devices.
Ultrathin-shell epitaxial Ag@Au core-shell nanowires for high-performance and chemically-stable electronic, optical, and mechanical devices

Yangzhi Zhu,Sanggon Kim,Xuezhi Ma,Peter Byrley,Ning Yu,Qiushi Liu,Xiaoming Sun,Da Xu,Sangshan Peng,Martin C. Hartel,Shiming Zhang,Vadim Jucaud,Mehmet R. Dokmeci,Ali Khademhosseini,Ruoxue Yan

DOI: https://doi.org/10.1007/s12274-021-3718-z

IF: 9.9

2021-08-07

Nano Research

Abstract:Abstract Silver nanowires (AgNWs) hold great promise for applications in wearable electronics, flexible solar cells, chemical and biological sensors, photonic/plasmonic circuits, and scanning probe microscopy (SPM) due to their unique plasmonic, mechanical, and electronic properties. However, the lifetime, reliability, and operating conditions of AgNW-based devices are significantly restricted by their poor chemical stability, limiting their commercial potentials. Therefore, it is crucial to create a reliable oxidation barrier on AgNWs that provides long-term chemical stability to various optical, electrical, and mechanical devices while maintaining their high performance. Here we report a room-temperature solution-phase approach to grow an ultra-thin, epitaxial gold coating on AgNWs to effectively shield the Ag surface from environmental oxidation. The Ag@Au core-shell nanowires (Ag@Au NWs) remain stable in air for over six months, under elevated temperature and humidity (80 °C and 100% humidity) for twelve weeks, in physiological buffer solutions for three weeks, and can survive overnight treatment of an oxidative solution (2% H 2 O 2 ). The Ag@Au core-shell NWs demonstrated comparable performance as pristine AgNWs in various electronic, optical, and mechanical devices, such as transparent mesh electrodes, surface-enhanced Raman spectroscopy (SERS) substrates, plasmonic waveguides, plasmonic nanofocusing probes, and high-aspect-ratio, high-resolution atomic force microscopy (AFM) probes. These Au@Ag core-shell NWs offer a universal solution towards chemically-stable AgNW-based devices without compromising material property or device performance.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Protecting the Nanoscale Properties of Ag Nanowires with a Solution-Grown SnO2 Monolayer As Corrosion Inhibitor

Yang Zhao,Xijun Wang,Shize Yang,Elisabeth Kuttner,Aidan A. Taylor,Reza Salemmilani,Xin Liu,Martin Moskovits,Binghui Wu,Ahmad Dehestani,Jian-Feng Li,Matthew F. Chisholm,Zhong-Qun Tian,Feng-Ru Fan,Jun Jiang,Galen D. Stucky

DOI: https://doi.org/10.1021/jacs.9b07172

IF: 15

2019-01-01

Journal of the American Chemical Society

Abstract:The chemical reactivity and/or the diffusion of Ag atoms or ions during thermal processing can cause irreversible structural damage, hindering the application of Ag nanowires (NWs) in transparent conducting films and other applications that make use of the material’s nanoscale properties. Here, we describe a simple and effective method for growing monolayer SnO2 on the surface of Ag nanowires under ambient conditions, which protects the Ag nanowires from chemical and structural damage. Our results show that Sn2+ and Ag atoms undergo a redox reaction in the presence of water. First-principle simulations suggest a reasonable mechanism for SnO2 formation, showing that the interfacial polarization of the silver by the SnO2 can significantly reduce the affinity of Ag to O2, thereby greatly reducing the oxidation of the silver. The corresponding values (for example, before coating: 17.2 Ω/sq at 86.4%, after coating: 19.0 Ω/sq at 86.6%) show that the deposition of monolayer SnO2 enables the preservation of high transparency and conductivity of Ag. In sharp contrast to the large-scale degradation of pure Ag-NW films including the significant reduction of its electrical conductivity when subjected to a series of harsh corrosion environments, monolayer SnO2 coated Ag-NW films survive structurally and retain their electrical conductivity. Consequently, the thermal, electrical, and chemical stability properties we report here, and the simplicity of the technology used to achieve them, are among the very best reported for transparent conductor materials to date.
Long-term Electrically Stable Silver Nanowire Composite Transparent Electrode under High Current Density

Kaiqing Wang,Yunxia Jin,Fei Xiao

DOI: https://doi.org/10.1007/s10854-021-06386-4

2021-01-01

Abstract:Silver nanowire (AgNW) network has been employed into many electronic devices as transparent electrode. However, the poor electrical stability under current shock has been seriously holding its practical application, and we still lack a long-term electrically stable AgNW system to study the underlying fundamentals of electrical failure. In this work, the electrical stability performance and failure mechanism of chitosan-ascorbic acid (Chi-AsA)/AgNW composite under current stress were thoroughly studied. The composite electrode maintained stable above 24,000 h under high current density of 100 mA cm(-1). The main failure in AgNW composite is found to be a wave break perpendicular to the current instead of traditional uniform degradation across the entire AgNW networks. More interestingly, the AgNWs in failed composite electrode maintained their original smooth morphology excepting the crack region, while the AgNWs in pristine networks degraded to nanoparticles or became disconnected everywhere. The patterned AgNW composite in microscale exhibits long lifetime in resisting current stress as well. The effect of over-coating location, electrical stress, temperature, and over-coating materials on the electrical stability were studied. The over-coating layer of Chi-AsA is proven to suppress the silver atoms from electromigration, reduce the concentrated Joule heating at junctions, and inhibit the corrosion. The Chi-AsA/AgNW composite enables electrically stable transparent conductor for long-serving optoelectronics, and the mechanism investigation deepens the comprehension of preparing electrically stable AgNW system.
Coating-free, air-stable silver nanowires for high-performance transparent conductive film

Long Tang,Jiajia Zhang,Lei Dong,Yunmei Pan,Chongyang Yang,Mengxiong Li,Yingbo Ruan,Jianhua Ma,Hongbin Lu

DOI: https://doi.org/10.1088/1361-6528/aace11

IF: 3.5

2018-07-05

Nanotechnology

Abstract:Silver nanowire (Ag NW) based films are considered as a promising alternative for traditional indium tin oxide but still suffer from some limitations, including insufficient conductivity, transparency and environmental instability. We here report a novel etching synthesis strategy to improve the performance of Ag NW films. Different from the traditional methods to synthesize high aspect ratios of NWs or employ electrically conductive coatings, we find it effective to reduce the high-reactivity defects of NWs for optimizing the comprehensive performance of Ag NW films. In this strategy etching can suppress the generation of high-reactivity defects and meanwhile the etching growth of NWs can be accomplished in an uneven ligand distribution environment. The resulting Ag NWs are uniformly straight with a sharp-edged structure. The transparent conductive film obtained exhibits simultaneous improvements in electrical conductivity, transparency and air stability. Even after exposure in air for 200 days and no protective coatings, the film can still meet the highest requirement of practical applications, with a figure of merit 361 (i.e., FoM > 350). These results not only demonstrate the importance of defect control in the synthesis of Ag NWs, but also pave a way for further optimizing the performance of Ag NW-based films.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Degradation mechanisms of silver nanowire electrodes under ultraviolet irradiation and heat treatment

Dong Chul Choo,Tae Whan Kim

DOI: https://doi.org/10.1038/s41598-017-01843-9

IF: 4.6

2017-05-10

Scientific Reports

Abstract:We report the degradation mechanisms of the silver nanowire (Ag NW) electrodes that play a significantly important role in the stability of wearable and flexible devices. The degradation mechanisms behind the increase in the sheet resistances of Ag NW electrodes were clarified by investigating the variations in the structure and the chemical composition of the Ag NW electrodes caused by ultraviolet irradiation and thermal treatment. While the shapes of the Ag NWs were affected by melting during the thermal degradation process, the chemical composition of the polyvinylpyrrolidone protective layer on the surfaces of the Ag NWs was not changed. Ultraviolet irradiation deformed the shapes of the Ag NWs because nitrogen or oxygen atoms were introduced to the silver atoms on the surfaces of the Ag NWs. A graphene-oxide flake was coated on the Ag NW electrodes by using a simple dipping method to prevent ultraviolet irradiation and ozone contact with the surfaces of the Ag NWs, and the increase in the sheet resistance in the graphene-oxide-treated Ag NWs was suppressed. These observations will be of assistance to researchers trying to find novel ways to improve the stability of the Ag NW electrodes in next-generation wearable devices.

multidisciplinary sciences
PFSA-passivated silver nanowire transparent electrodes for highly flexible organic-light-emitting devices with improved stability

Chi Ma,Xiu-Min Gao,Yan-Gang Bi,Xu-Lin Zhang,Da Yin,Xue-Mei Wen,Yue-Feng Liu,Jing Feng,Hong-Bo Sun

DOI: https://doi.org/10.1016/j.orgel.2020.105727

IF: 3.868

2020-09-01

Organic Electronics

Abstract:Instability and large wire-wire contact resistance of silver nanowires (AgNWs) have seriously hindered their practical applications as electrodes in optoelectronic devices. Although various methods have been demonstrated to improve the stability and conductivity of the AgNWs, a simple and low-cost process, especially compatible to the flexible substrates for their applications in flexible devices, is still a challenge. Here, perfluorinated sulfonic acid (PFSA) polymer has been employed as a surface-passivation layer on the AgNWs through a simple surface coating. The PFSA passivation can simultaneously improve the conductivity, thermal stability and mechanical stability of the AgNWs. As a result, the PFSA-passivated AgNWs film maintains an almost constant conductivity under ambient condition after heating for 30 min at 250 °C or 10 days storage at room temperature, and 600 continuous bending cycles at a bending radius of 1 mm. The PFSA-passivated AgNWs have been applied to flexibly organic light emitting devices as their electrodes, and both mechanical stability and long-term operational stability have been improved.

materials science, multidisciplinary,physics, applied
High-Stability Silver Nanowire–Al2O3 Composite Flexible Transparent Electrodes Prepared by Electrodeposition

Honglong Ning,Junlong Chen,Zhihang Li,Zhuohui Xu,Rihui Yao,Hongfu Liang,Taijiang Liu,Guoping Su,Dongxiang Luo,Junbiao Peng

DOI: https://doi.org/10.3390/nano11113047

IF: 5.3

2021-11-12

Nanomaterials

Abstract:Silver nanowire (AgNW) conductive film fabricated by solution processing was investigated as an alternative to indium tin oxide (ITO) in flexible transparent electrodes. In this paper, we studied a facile and effective method by electrodepositing Al2O3 on the surface of AgNWs. As a result, flexible transparent electrodes with improved stability could be obtained by electrodepositing Al2O3. It was found that, as the annealing temperature rises, the Al2O3 coating layer can be transformed from Al2O3·H2O into a denser amorphous state at 150 °C. By studying the increase of electrodeposition temperature, it was observed that the transmittance of the AgNW–Al2O3 composite films first rose to the maximum at 70 °C and then decreased. With the increase of the electrodeposition time, the figure of merit (FoM) of the composite films increased and reached the maximum when the time was 40 s. Through optimizing the experimental parameters, a high-stability AgNW flexible transparent electrode using polyimide (PI) as a substrate was prepared without sacrificing optical and electrical performance by electrodepositing at −1.1 V and 70 °C for 40 s with 0.1 mol/L Al(NO3)3 as the electrolyte, which can withstand a high temperature of 250 °C or 250,000 bending cycles with a bending radius of 4 mm.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Wired for stability: evaluating the electrical performance of a solution-processed zinc oxide-modified silver nanowire transparent electrode

Jovan N. Lukic,Vuk V. Radmilovic

DOI: https://doi.org/10.1039/d4cp03141e

IF: 3.3

2024-10-12

Physical Chemistry Chemical Physics

Abstract:Silver nanowires (AgNWs) have gained much attention owing to their optoelectronic and mechanical properties and are therefore potential candidates to tackle intrinsic drawbacks of currently applied transparent electrodes in various (opto)electronic devices. In order for AgNWs to be justifiably considered as viable, it is necessary to address their insufficient stability by coupling them with another constituent into a nanocomposite. For this purpose, ZnO was chosen because of its low cost, solution processability and barrier properties. In this paper, a fully solution processed AgNW/ZnO TE film was investigated in order to understand the effect of ZnO coating on the electrical stability of AgNWs, including the mechanism of degradation during their exposure to high electrical current densities. The nanocomposite transparent electrode was processed with ZnO coatings to determine their effect on its optoelectronic properties and electrical stability, where the ZnO triple coated AgNW demonstrated the best combination of optoelectronic properties and stability at the highest working voltage.

chemistry, physical,physics, atomic, molecular & chemical
Flexible high-performance SnO2/AgNWs bilayer transparent conductors for flexible transparent heater applications

Shihui Yu,Xiaoyu Liu,Helei Dong,Xiaohu Wang,Lingxia Li

DOI: https://doi.org/10.1016/j.ceramint.2021.04.046

IF: 5.532

2021-07-01

Ceramics International

Abstract:Because of high transparency, conductivity and flexibility, silver nanowire (AgNW) networks have been widely explored as a promising alternative to indium tin oxide (ITO). However, their poor adhesiveness, corrosion and thermal stability still remain limiting factors for widespread adoption in a range of devices. Here, we introduce SnO2 to improve the adhesion and stability performances of AgNWs by controlling the preparation process, enhance the conductivity by providing the electric channels at contacts of AgNWs. The unique structural feature of composite film allows for a novel transparent conductor with low sheet resistance of 7.9 Ω/sq. and high transmittance of 87.6% (at 550 nm), as well as good flexibility. Unlike bare AgNW networks, the composite film retains its original conductivity under immersion in HCl and Na2S solutions, or long-term storage at up to 85% relative humidity at 85 °C. This chemical durability can be attributed to the absence of silver corrosion products for the AgNW encapsulated by SnO2. Furthermore the resistance is nearly unchanged after tape and ultrasonication tests, indicating a good adhesion to the substrate. Finally, a flexible transparent heater employing a hybrid film is realized.

materials science, ceramics

Uwe Reinhardt to speak at OR managers' meeting. Interview by Pat Patterson.

Tackling the Stability Issues of Silver Nanowire Transparent Conductive Films through FeCl3 Dilute Solution Treatment

Enhanced stability of silver nanowire transparent conductive films against ultraviolet light illumination

The interaction of angiotensin II with heparin.

Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles

Efficient Protection of Silver Nanowire Transparent Electrodes by All-Biorenewable Layer-by-Layer Assembled Thin Films

Metal-Organic Framework-Modified Silver Nanowire Transparent Film with Enhanced Conductivity and Stability for Efficient Organic Light-Emitting Diodes

Research progress on the stability of transparent conductive films for silver nanowires

Significantly Improved Stability of PDMS- Packaged Silver Nanowire Film under Multiple Environments

Overcoming Temperature‐Induced Degradation of Silver Nanowire Electrodes by an Ag@SnO x Core‐Shell Approach

[Action of anesthesia and surgical trauma on carbohydrate metabolism. Preliminary note: behavior of the blood lactic acid].

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Ultrathin-shell epitaxial Ag@Au core-shell nanowires for high-performance and chemically-stable electronic, optical, and mechanical devices

Protecting the Nanoscale Properties of Ag Nanowires with a Solution-Grown SnO2 Monolayer As Corrosion Inhibitor

Long-term Electrically Stable Silver Nanowire Composite Transparent Electrode under High Current Density

Coating-free, air-stable silver nanowires for high-performance transparent conductive film

Degradation mechanisms of silver nanowire electrodes under ultraviolet irradiation and heat treatment

PFSA-passivated silver nanowire transparent electrodes for highly flexible organic-light-emitting devices with improved stability

High-Stability Silver Nanowire–Al2O3 Composite Flexible Transparent Electrodes Prepared by Electrodeposition

Wired for stability: evaluating the electrical performance of a solution-processed zinc oxide-modified silver nanowire transparent electrode

Flexible high-performance SnO2/AgNWs bilayer transparent conductors for flexible transparent heater applications