[Action of anesthesia and surgical trauma on carbohydrate metabolism. Preliminary note: behavior of the blood lactic acid].

A. Pizzoferrato,S. Cini

1961-12-01

Abstract:

What problem does this paper attempt to address?

Capillary Force-Induced Graphene Spontaneous Transfer and Encapsulation of Silver Nanowires for Highly-Stable Transparent Electrodes

Tingting Hao,Haoyu Ji,Dong Xu,Dongqi Liu,Zichen Ren,Wenchao Liu,Yike Zhang,Jiawu Sun,Jiupeng Zhao,Leipeng Zhang,Yao Li

DOI: https://doi.org/10.1021/acsami.4c06315

IF: 9.5

2024-07-20

ACS Applied Materials & Interfaces

Abstract:Silver nanowires (NWs) (AgNWs) have emerged as the most promising conductive materials in flexible optoelectronic devices owing to their excellent photoelectric properties and mechanical flexibility. It is widely acknowledged that the practical application of AgNW networks faces challenges, such as high surface roughness, poor substrate adhesion, and limited stability. Encapsulating AgNW networks with graphene has been recognized as a viable strategy to tackle these issues. However, conventional...

materials science, multidisciplinary,nanoscience & nanotechnology
Ag Nanowire-Based Stretchable Electrodes and Wearable Sensor Arrays

Qian Che,Qian Zhao,Mingjun Hu,Ruzhan Qin,Guangcun Shan,Jun Yang

DOI: https://doi.org/10.1021/acsanm.1c03347

IF: 6.14

2021-11-16

ACS Applied Nano Materials

Abstract:Attributed to excellent mechanical compatibility with the human body and thus favorable comfortability and good integrability, stretchable conductors and functional conductive patterns have been one of the most important components in wearable electronic devices. However, due to poor compatibility between stretchability and conductivity in most material system, the simple, fast, and low-cost fabrication of a stretchable conductor, especially conductive patterns, has been a problem to address in this field. In this paper, we propose a flexible and robust laser ablation method in combination with a two-step film transfer process for the fabrication of stretchable silver nanowire (AgNW)-based conductive patterns. In this method, three critical steps were involved for the optimized properties. First, a simple one-pot solvothermal method was developed for scalable synthesis of high-quality AgNWs; second, a reliable film transfer method was proposed to ensure complete replication of the properties of the AgNW film; third, a digital laser ablation technique was employed for the selective removal of the AgNW layer. Finally, stretchable transparent conductive electrodes, circuits, and functional patterns were fabricated. As a proof-of-concept demonstration, a wearable sensor and multipixel capacitive sensor arrays were prepared and showed good and reliable performance under various deformations, indicating the proposed method is available for the fabrication of various stretchable conductive patterns.

materials science, multidisciplinary,nanoscience & nanotechnology
Uwe Reinhardt to speak at OR managers' meeting. Interview by Pat Patterson.

U. Reinhardt

1994-09-01

Abstract:
Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles

Ly Thi Trinh,Thi Tu Linh To,Pyeongsam Ko,Kyoohee Woo,Sin Kwon,Jinsung Rho,Hongseok Youn

DOI: https://doi.org/10.1002/smll.202403702

IF: 13.3

2024-08-01

Small

Abstract:This research addresses challenges with silver nanowires (Ag NWs) as transparent conductive electrodes (TCEs) and heaters in commercial devices. Here, zinc oxide nanoparticles (ZnO NPs) are first reported as a protective layer for Ag NWs. Multi-physics simulations confirm enhanced thermal stability due to improved heat dissipation, temperature distribution, and thermal conductivity from ZnO. When Ag NWs are surrounded by air, heat transfers mainly through convection and radiation because of air's low conduction coefficient. Encasing Ag NWs in ZnO enhances heat transfer to the ZnO surface, accelerating cooling and dissipating more heat into the atmosphere via convection. The results show composite's efficiency in the Joule effect, maintaining a consistent temperature of 78 °C for 700 s after 500 bending cycles, a significant improvement over Ag NWs operating for only 5 s at 80 °C. Additionally, the composite film exhibited exceptional performance, including a sheet resistance of 9.8 Ω sq-1 and an optical transmittance of 96.96 %, outperforming Ag NWs, which have a sheet resistance of 12 Ω sq-1 and a transmittance of 94.11%. The combination of enhanced electrical, thermal, and mechanical stability, along with impressive optical properties, makes Ag NWs/ZnO NPs a promising candidate for transparent conductive electrode materials in various applications.
Structural, optical, and electrical characterizations of silver nanowire/single-layer graphene oxide composite film

Naveed Ullah,Jianlei Cui,Xiaoying Ren,Huanhuan Mei,Kaida Xu,Muhammad Idrees,Xuesong Mei

DOI: https://doi.org/10.1016/j.apsusc.2022.154343

IF: 6.7

2022-07-29

Applied Surface Science

Abstract:Transparent conductive electrodes have been widely used in optoelectronic devices such as solar cells, displays, and touch devices. Although graphene oxide and silver nanowires have attracted considerable attention, novel transparent conductive materials with effective integrated electrical and optical properties are required. However, there are several drawbacks, including the high oxidation instability and interfacial bonding to substrates, which should be overcome for the wide use of metallic nanowires in transparent conductive electrodes. This study demonstrates a simple solution-based method for fabrication of hybrid transparent conducting electrodes based on silver nanowires/single-layer graphene oxide (AgNWs/SLGO). The resulting embedded electrode has a transparency of 91 % in the ultraviolet–visible spectrum region at 550 nm and low sheet resistance of 11 Ω/sq, without degradation after two months at room temperature and ambient air. The thermal stability under an environment with high temperature and humidity was tested. The excellent environmental and thermal stability of the AgNWs/SLGO composite films may facilitate their use in the next generations of optoelectronic devices.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Aligned Silver Nanowires Enabled Highly Stretchable and Transparent Electrodes with Unusual Conductive Property

Hebing Hu,Shichao Wang,Shancheng Wang,Guowei Liu,Tun Cao,Yi Long

DOI: https://doi.org/10.1002/adfm.201902922

IF: 19

2019-06-11

Advanced Functional Materials

Abstract:<p>Transparent conductors for the next generation of soft electronic devices need to be highly stretchable, conductive, and transparent, while an inevitable challenge lies in enhancing them simultaneously. Cost‐effective silver nanowires (AgNWs) are widely used but the conventional random network yields a high junction resistance as well as degraded conductivity in the stretched state. Here, a novel, facile, and versatile agitation‐assisted assembly approach is reported to control the orientation direction and density of AgNWs and to layer‐by‐layer deposit the AgNWs monolayer or multilayers onto the prestrained soft substrate. This electrode demonstrates an unprecedented low sheet resistance of 2.8 Ω sq<sup>−1</sup> as well as high transparency of 85% and high stretchability of 40%. It is interesting to note that contrary to most other reports, such a device shows higher conductivity in the stretched state compared to the released state.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Aligned Silver Nanowires Wrapped in Graphene as a Transparent Electrode for Electromagnetic Interference Shielding Applications

Siyi Yan,Henan Wang,Peng Li

DOI: https://doi.org/10.1021/acsanm.3c05366

IF: 6.14

2024-01-04

ACS Applied Nano Materials

Abstract:This study introduces a solution-processed method for producing graphene-wrapped aligned silver nanowires (AgNWs) using electrodeless deposition, electrospinning, and subsequent electrodeposition. In contrast to their unwrapped counterparts, the graphene wrapping leads to a 46% reduction in sheet resistance while preserving transmittance. Finite-element theory-based electrical–thermal coupling analysis on AgNWs uncovers that a significant potential gradient, in conjunction with symmetrically distributed Joule heat, instigates the electrical failure of AgNWs. The graphene shell not only enhances the Joule heating stability of AgNWs but also boosts their electromagnetic interference shielding effectiveness by 20%, driven by amplified dual reflections and multiple dielectric relaxation processes.

materials science, multidisciplinary,nanoscience & nanotechnology
Practical Aspects of the Use of Some Psychological Tests of Anxiety in a Situation of Stress

P. Bridges

DOI: https://doi.org/10.1192/bjp.123.5.587

1973-11-01

Abstract:There is an increasing use of psychological tests designed to measure anxiety in both psychological and psychiatric research. Yet the theoretical bases upon which the various questionnaires have been constructed in relation to their practical application remain less than clear. For example, the Taylor Manifest Anxiety Scale (TMAS) (Taylor, 1955), was developed from the Minnesota Multiphasic Personality Inventory as a more specific measure of manifest anxiety. The TMAS has repeatedly been shown to correlate highly significantly with the neuroticism score of the Eysenck Personality Inventory (EPI) (Eysenck and Eysenck, 1964). The EPI is purported to measure personality in a general way in two dimensions, one of neuroticism and the other of extraversion-introversion. The association between these two tests, therefore, suggests that either both relate to a general personality variable of emotional instability, or they both more specifically measure a tendency to experience anxiety. It could also mean that these two aspects, one measured by each test, involve a personality characteristic in common.
Electrohydrodynamic Printing of High‐Resolution Self‐Reduced Soldered Silver Nanowire Pattern for Wearable Flexible Strain Sensors

Xuanyi Hu,Jiayun Feng,He Zhang,Jingxuan Ma,Zhuohuan Wu,Jiayue Wen,Shang Wang,Yanhong Tian

DOI: https://doi.org/10.1002/admt.202300759

IF: 6.8

2023-07-21

Advanced Materials Technologies

Abstract:Electrohydrodynamic (EHD) printing and joining of silver nanowires (AgNWs) are combined to fabricate strain sensors by two‐step EHD printing of AgNW ink and Ag ion ink. The achieved resolution is up to ≈20 μm. The nanojoining of AgNW contributes to significant decrease of sheet resistance, leading to superior sensitivity and stability of printed strain sensors. As an indispensable aspect of flexible and printed electronics, flexible strain sensors composed of silver nanowires (AgNWs) have attracted significant attention recently. However, low resolution and large wire‐wire contact resistance still impede the stability and sensitivity of AgNW‐based flexible strain sensors. Herein, self‐reduced soldered AgNW pattern is fabricated by combining the high‐resolution electrohydrodynamic (EHD) printing and joining of AgNWs. The resolution achieved by EHD printing is up to ≈20 μm. The contact resistance between AgNWs is greatly reduced by depositing Ag atoms at the AgNW junctions while EHD printing Ag ion ink on as‐prepared AgNW pattern. After self‐reduced soldering process, the sheet resistance decreases from 14.8 to 2.13 Ω sq−1. This process can be conducted under room temperature and ambient conditions and requires no external assistance from heat, light, or mechanical pressing. Furthermore, the deposited Ag atoms at the junctions remarkably improve the sensitivity (gauge factor 14.5–37.9) and stability (over 5000 stretching cycles with 25% strain). This superior sensitivity and stability occur because nano‐junctions induced by the self‐reduced soldering process significantly reduce the initial resistance and enable a robust network structure. This EHD‐based technique for nanojoining of AgNWs demonstrates its potential for flexible and wearable electronics.

materials science, multidisciplinary
Facile Transfer of a Transparent Silver Nanowire Pattern to a Soft Substrate Using Graphene Oxide As a Double-Sided Adhesion-Tuning Layer.

Jianzhong Wang,Yunxia Jin,Kaiqing Wang,Xiaocun Wang,Fei Xiao

DOI: https://doi.org/10.1021/acsami.2c21697

IF: 9.5

2023-01-01

ACS Applied Materials & Interfaces

Abstract:Silver nanowires (AgNWs) have been employed in various optoelectronic devices as transparent electrodes. However, it remains a great challenge to facilely pattern silver nanowires to realize desirable soft skin devices. Here, we develop an intact transfer method via a double-layered adhesion regulator of graphene oxide (GO) enabling complete transfer of a silver nanowire pattern from a tough substrate onto soft polydimethylsiloxane (PDMS) and flexible polyethylene (PE). We achieve positive and negative patterns simultaneously when selectively transferring silver nanowire patterns. The resulting patterned AgNW electrodes have uniform conductivity and long-term stability. The underlying mechanism of the clean transfer is thoroughly investigated via transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). GO plays a role in reducing the adhesion of AgNW to the donor tough substrate and enhancing adhesion of AgNW to the target soft substrate simultaneously. Finally, we demonstrate the utility of the patterned electrodes as transparent sensors detecting body motion. This work offers an effective solution to the challenging patterning problem of silver nanowires on a hydrophobic soft substrate, which is compatible with the soft component in emerging smart skin or wearable electronics.
Fused Silver Nanowires with Silica Sol Nanoparticles for Smooth, Flexible, Electrically Conductive and Highly Stable Transparent Electrodes

Shengchi Bai,Haifeng Wang,Hui Yang,He Zhang,Tianrui Chen,Xingzhong Guo

DOI: https://doi.org/10.1039/c8ra01569d

IF: 4.036

2018-01-01

RSC Advances

Abstract:Silver nanowires (AgNWs) thin films have emerged as promising next-generation transparent conductive electrodes (TCEs), and increasing the opto-electrical properties and long-term stability of AgNWs based TCEs is now a major research focus. In this work, a smooth, flexible, electrically conductive and highly stable transparent AgNWs-silica nanoparticles composite TCE has been successfully manufactured via coating an aqueous AgNWs-silica sol composite conductive ink on a PET substrate through the Mayer rod method. The effects of particle size and concentration of silica sol on the smoothness, opto-electrical properties and stability of AgNWs based TCEs were investigated in detail, and the mechanisms of the decoration of AgNWs by silica sol nanoparticles and welding of the network junction are discussed briefly. The TCE based on AgNWs reinforced with 50 nm silica nanoparticles (80 ppm concentration of silica sol) possesses a smooth surface with an RMS value of 9.45 nm, and superior opto-electrical properties with a sheet resistance of 28 Ω sq−1 and a transmittance of 97%. The resistance of the resultant AgNWs-silica composite TCE remains nearly constant after bending for 1000 cycles or exposure to Na2S solution for 300 s, indicating high stability. The newly designed AgNWs-silica composite TCE is a promising flexible and transparent electrode to be applied in next-generation flexible electronic devices.
Construction of laser-induced graphene/silver nanowire composite structures for low-strain, high-sensitivity flexible wearable strain sensors

PingAn Yang,JingYuan Zhao,Rui Li,ZhiHao Zhou,YinGang Gui,RuiXue Sun,DeCheng Wu,XiaoJie Wang

DOI: https://doi.org/10.1007/s11431-024-2789-4

2024-10-27

Science China Technological Sciences

Abstract:Sandwich-structured flexible sensors based on graphene have high sensitivity and stability. When graphene is combined with a flexible substrate in a sandwich structure, the weak bonding between them compromises the sensor's stability and sensitivity at low strains. This presents challenges in monitoring subtle physiological activities, such as hand bending and pulse rate. For this purpose, laser-induced graphene (LIG) is proposed to be used to prepare flexible sensors in order to improve the sensitivity and stability of the sensors at low strains. Polydimethylsiloxane (PDMS) with low modulus and polyimide (PI) with rich carbon content are selected as precursor materials for LIG, and graphene is formed through laser induction. Subsequently, silver nanowires (Ag NWs) solution is added to LIG to give the sensor low strain and high sensitivity performance. When the PI/PDMS ratio is 1:3, the Ag NWs/LIG flexible strain sensor exhibits excellent sensitivity (GF=778.468) over a small strain range (8.76%–11.25%). Meanwhile, the sensor still shows excellent stability after 2000 cycle experiments. The Ag NWs/LIG flexible strain sensor shows good performance when placed on the back of the hand, around the eyes, etc. It is demonstrated that Ag NWs/LIG flexible strain sensors have good application potential in human physiological activity monitoring, health management and medical fields, and provide a low-strain, high-sensitivity sensor design strategy for flexible wearable devices.

materials science, multidisciplinary,engineering
Controlling the Structures, Flexibility, Conductivity Stability of Three-Dimensional Conductive Networks of Silver Nanoparticles/Carbon-Based Nanomaterials with Nanodispersion and their Application in Wearable Electronic Sensors

Chih-Wei Chiu,Jia-Wun Li,Chen-Yang Huang,Shun-Siang Yang,Yu-Chian Soong,Chih-Lung Lin,Jimmy Chi-Min Lee,William Anderson Lee Sanchez,Chih-Chia Cheng,Maw-Cherng Suen

DOI: https://doi.org/10.3390/nano10051009

IF: 5.3

2020-05-25

Nanomaterials

Abstract:This research has successfully synthesized highly flexible and conductive nanohybrid electrode films. Nanodispersion and stabilization of silver nanoparticles (AgNPs) were achieved via non-covalent adsorption and with an organic polymeric dispersant and inorganic carbon-based nanomaterials—nano-carbon black (CB), carbon nanotubes (CNT), and graphene oxide (GO). The new polymeric dispersant—polyisobutylene-b-poly(oxyethylene)-b-polyisobutylene (PIB-POE-PIB) triblock copolymer—could stabilize AgNPs. Simultaneously, this stabilization was conducted through the addition of mixed organic/inorganic dispersants based on zero- (0D), one- (1D), and two-dimensional (2D) nanomaterials, namely CB, CNT, and GO. Furthermore, the dispersion solution was evenly coated/mixed onto polymeric substrates, and the products were heated. As a result, highly conductive thin-film materials (with a surface electrical resistance of approximately 10−2 Ω/sq) were eventually acquired. The results indicated that 2D carbon-based nanomaterials (GO) could stabilize AgNPs more effectively during their reductNion and, hence, generate particles with the smallest sizes, as the COO− functional groups of GO are evenly distributed. The optimal AgNPs/PIB-POE-PIB/GO ratio was 20:20:1. Furthermore, the flexible electrode layers were successfully manufactured and applied in wearable electronic sensors to generate electrocardiograms (ECGs). ECGs were, thereafter, successfully obtained.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Controllable Synthesis of Nickel Nanowires and Its Application in High Sensitivity, Stretchable Strain Sensor for Body Motion Sensing

Shan Wang,Kaifeng Chen,Min Wang,Haosheng Li,Guorui Chen,Jian Liu,Luhang Xu,Yue Jian,Chengda Meng,Xiaoyi Zheng,Suyu Liu,Chong Yin,Zongrong Wang,Piyi Du,Shaoxing Qu,Chi Wah Leung

DOI: https://doi.org/10.1039/c7tc05970a

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:A facile, low-cost magnetic field-assisted chemical reduction method was proposed for synthesizing nickel nanowires (NiNWs) with both controllable diameter and high length to diameter (L/D) ratio at temperature as low as 60 °C. NiNWs with diameter as low as 180 ± 21 nm and L/D ratio as high as 300 were achieved by controlling the reaction temperature, NiCl2 concentration and the quantity of reductant in a magnetic field of 170 mT. Based on the NiNWs, a high-sensitivity and stretchable strain sensor with sandwich structure consisting of NiNWs and Ecoflex elastomer was proposed. Gauge factor as high as 200 was demonstrated up to a strain of 100%. Applications of the sensor in detecting body motion including finger gestures, facial expressions and different phonations are presented. This study provides a promising solution for smart sensors for next generation robotics as well as for human–machine interfacing applications.
Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Yunxia Jin,Dunying Deng,Yuanrong Cheng,Lingqiang Kong,Fei Xiao

DOI: https://doi.org/10.1039/c3nr05820d

IF: 6.7

2014-01-01

Nanoscale

Abstract:As a promising candidate to replace the brittle and expensive transparent indium tin oxide (ITO) conductor, the use of silver nanowire (AgNW) networks still involves issues such as high-temperature post-treatments and poor substrate adhesion for industrial application. Here a room-temperature soldering and one-step solution method is developed to achieve high-performance Ag nanowire transparent conductive films (TCFs). A nonconductive binder is prepared from poly(dopamine) and alginic acid which contains abundant catechol and carboxylic acid functional groups. The drying of the binder on the Ag nanowire percolation networks induces tighter contact among the nanowires and strong adhesion to the substrate, simultaneously enhancing the electrical and mechanical properties without a high-temperature annealing process. As a result, a highly conductive and bendable AgNW film is demonstrated on a low-cost polyethylene glycol terephthalate (PET) substrate, showing an 89% optical transmittance at λ = 550 nm and a sheet resistance of 16.3 Ohm sq(-1). Its optical and electrical performances are superior to those obtained from the reported indium tin oxide (ITO) films. Moreover, the AgNW film exhibits strong adhesion to the substrate, maintaining its conductivity after 100 tape tests, and it still resists the tape test even after exposure to solvent for several hours. Most importantly, the film shows good reliability during long-term 85 °C/85% RH (relative humidity) aging, which has been rarely investigated although it is a critical requirement for industrial application. The advanced and wide-ranging features of the prepared AgNW film greatly contribute to its use as a transparent electrode in multifunctional flexible electronic devices.
Synthesis of Ag nanowires with high aspect ratio for highly sensitive flexible strain sensor

Xue Qi,Hao Lv,Yuxin Wang,Yang Ye,Peike Wang,Ao Yin,Jingjing Luo,Haipeng Liu,Zhongqi Ren,Jiang Liu,Suzhu Yu,Jun Wei

DOI: https://doi.org/10.1002/cnma.202400264

IF: 3.82

2024-08-20

ChemNanoMat

Abstract:Flexible sensors, being a vital component of flexible devices, determine the functionalities and performance capabilities of the devices., especially, are widely used in flexible sensors in past research due to their great advantages in flexibility and sensitivity. In this work , silver nanowires with aspect ratios of 600, 1000, and 1400 were synthesized by adjusting the synergy of Br– and Cl–, along with other process parameters, leading to an improved production efficiency of silver nanowires. The stability of the conductive network is enhanced when the aspect ratio of silver nanowires is 1000 and 1400.The sensor demonstrated high sensitivity at high strain, along with an extended strain range. Moreover, it was observed that increasing the aspect ratio of silver nanowires led to a more stable conductive network, thus enhancing the sensor's stability with over 10000 stretching cycles. under the appropriate deposition density, silver nanowires with aspect ratio of 600 have high sensitivity to low strain, and silver nanowires with aspect ratio of 1400 have high sensitivity to high strain, up to 247.3. Introducing microstructures on the surface of PDMS resulted in an increased maximum sensitivity of the sensor with decreasing microstructure size, reaching a maximum sensitivity of 322.2.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Fast Synthesis of Silver Nanowires Under Room Temperature via Ultrasonication-Mediated Galvanic Replacement for Flexible Transparent Electrodes

Qiusui Chen,Yuehua Ding,Meiling Xu,Ziyi Liu,Zhenpeng Liu,Qiang Liu,Yanmin Qin,Xing Wang,Zheng Fang,Haifeng Bao

DOI: https://doi.org/10.1039/d3tc03670g

IF: 6.4

2023-12-22

Journal of Materials Chemistry C

Abstract:In this work, we proposed a facile method for fast preparation of Ag nanowires by ultrasonication-mediated galvanic replacement reaction between Ag+ and raspberry-like Cu nanoparticles under room temperature. The structural and morphological properties of the obtained Ag nanowires were clarified by scanning electron microscopy, transmission electron microscope, high resolution transmission electron microscope, X-ray diffraction, and selected area electron diffraction techniques. The diameter and length of the obtained Ag nanowires were in the range of 60-90 nm and 25-55 μm, respectively. By coating Ag nanowire dispersions on polyethylene terephthalate substrates, the prepared flexible films had a transmittance of about 80% at 550 nm and sheet resistance of about 15 Ω/sq, respectively. It was noteworthy that the flexible transparent conductive films can tolerate multiple bendings at different angles, and keep good conductivity even after 10, 000 repeated bendings. Because of the comprehensive performance and simple preparation method of Ag nanowires, we envision that the development of promising routes for high-quality Ag nanowires could have broad applications in the field of flexible electronic devices.

materials science, multidisciplinary,physics, applied
Size-Optimized Silver Nanowires with Graphene Oxide for High-Performance Transparent Electrodes

Maolan Zhu,Jun Yin,Wei Weng,Chunhai Jiang,Jiangcong Zhou,Liang Wang,Shuiping Zhong

DOI: https://doi.org/10.1149/1945-7111/ad1297

IF: 3.9

2023-12-07

Journal of The Electrochemical Society

Abstract:Silver nanowire (AgNW)-based transparent electrodes are critical components for many modern electronic devices. However, preparation of high-performance AgNW-based transparent electrodes with appealing light transmittance and long-term stability is still challenging. Here, by combining the size-optimized AgNWs with graphene oxide (GO), a composite AgNWs/GO film electrode with high light-transmittance and appealing stability was prepared. For the size-controlled preparation of AgNWs, well-defined one-dimensional structure (average diameter 62 nm) was obtained by elaborately adjusting the Br- concentration (0.05 mM), Cl- concentration (1 mM), ratio of PVP/AgNO3 (5:1) and PVP-type selection (PVP1300k: PVP58k=2:1), contributing to a high light transmittance of 84% for the corresponding AgNWs-based electrode. After further introducing the GO, the film electrode presents much enhanced stability and increased film-substrate adhesive strength, with only a 3.6% increase in resistance after 1000 cycles of bending and being stable even under ultrasonic vibration. The results can provide new insights for designing electrode with ultrastability and high light transmittance.

electrochemistry,materials science, coatings & films
Fabrication of silver nanowire transparent electrodes at room temperature

Takehiro Tokuno,Masaya Nogi,Makoto Karakawa,Jinting Jiu,Thi Thi Nge,Yoshio Aso,Katsuaki Suganuma

DOI: https://doi.org/10.1007/s12274-011-0172-3

IF: 9.9

2011-10-18

Nano Research

Abstract:Silver nanowires (AgNWs) surrounded by insulating poly(vinylpyrrolidone) have been synthesized by a polyol process and employed as transparent electrodes. The AgNW transparent electrodes can be fabricated by heat-treatment at about 200 °C which forms connecting junctions between AgNWs. Such a heating process is, however, one of the drawbacks of the fabrication of AgNW electrodes on heat-sensitive substrates. Here it has been demonstrated that the electrical conductivity of AgNW electrodes can be improved by mechanical pressing at 25 MPa for 5 s at room temperature. This simple process results in a low sheet resistance of 8.6 Ω/square and a transparency of 80.0%, equivalent to the properties of the AgNW electrodes heated at 200 °C. This technique makes it possible to fabricate AgNW transparent electrodes on heat-sensitive substrates. The AgNW electrodes on poly(ethylene terephthalate) films exhibited high stability of their electrical conductivities against the repeated bending test. In addition, the surface roughness of the pressed AgNW electrodes is one-third of that of the heat-treated electrode because the AgNW junctions are mechanically compressed. As a result, an organic solar cell fabricated on the pressed AgNW electrodes exhibited a power conversion as much as those fabricated on indium tin oxide electrodes. These findings enable continuous roll-to-roll processing at room temperature, resulting in relatively simple, inexpensive, and scalable processing that is suitable for forthcoming technologies such as organic solar cells, flexible displays, and touch screens.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Highly Sensitive, Low Hysteretic and Flexible Strain Sensor Based on Ecoflex-AgNWs- MWCNTs Flexible Composite Materials

Yanlin Zhang,Xin Guo,Wei Wang,Li Chen,Li Liu,Hao Liu,Yin He

DOI: https://doi.org/10.1109/jsen.2020.3008159

IF: 4.3

2020-12-01

IEEE Sensors Journal

Abstract:Strain sensors based on silver nanowires (AgNWs) have attracted much attention due to their wide application of electronic skin, smart textiles, and health monitoring. In this work, we report a flexible strain sensor based on an Ecoflex flexible substrate. AgNWs and Multi-walled carbon nanotubes (MWCNTs) doped as a conductive material. The excellent ductility and elongation at break in Ecoflex, as well as excellent heat resistance and impact resistance, can increase the test range and increase the sensing range of the sensor. AgNWs-based sensors enhance the sensitivity of the sensor to 118.19 while improving linearity and stability and reducing hysteresis. In addition, strain sensors can be utilized to monitor body movements such as finger flexion, leg movements, and so on. In this work, smart gloves are used to monitor finger movements using flexible strain sensors, which show its great potential for wearable electronics applications.

engineering, electrical & electronic,instruments & instrumentation,physics, applied

[Action of anesthesia and surgical trauma on carbohydrate metabolism. Preliminary note: behavior of the blood lactic acid].

Capillary Force-Induced Graphene Spontaneous Transfer and Encapsulation of Silver Nanowires for Highly-Stable Transparent Electrodes

Ag Nanowire-Based Stretchable Electrodes and Wearable Sensor Arrays

Uwe Reinhardt to speak at OR managers' meeting. Interview by Pat Patterson.

Highly Transmittance, Mechanical, Thermally Stable Silver Nanowires Network Using ZnO Nanoparticles

Structural, optical, and electrical characterizations of silver nanowire/single-layer graphene oxide composite film

Aligned Silver Nanowires Enabled Highly Stretchable and Transparent Electrodes with Unusual Conductive Property

Aligned Silver Nanowires Wrapped in Graphene as a Transparent Electrode for Electromagnetic Interference Shielding Applications

Practical Aspects of the Use of Some Psychological Tests of Anxiety in a Situation of Stress

Electrohydrodynamic Printing of High‐Resolution Self‐Reduced Soldered Silver Nanowire Pattern for Wearable Flexible Strain Sensors

Facile Transfer of a Transparent Silver Nanowire Pattern to a Soft Substrate Using Graphene Oxide As a Double-Sided Adhesion-Tuning Layer.

Fused Silver Nanowires with Silica Sol Nanoparticles for Smooth, Flexible, Electrically Conductive and Highly Stable Transparent Electrodes

Construction of laser-induced graphene/silver nanowire composite structures for low-strain, high-sensitivity flexible wearable strain sensors

Controlling the Structures, Flexibility, Conductivity Stability of Three-Dimensional Conductive Networks of Silver Nanoparticles/Carbon-Based Nanomaterials with Nanodispersion and their Application in Wearable Electronic Sensors

Controllable Synthesis of Nickel Nanowires and Its Application in High Sensitivity, Stretchable Strain Sensor for Body Motion Sensing

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Synthesis of Ag nanowires with high aspect ratio for highly sensitive flexible strain sensor

Fast Synthesis of Silver Nanowires Under Room Temperature via Ultrasonication-Mediated Galvanic Replacement for Flexible Transparent Electrodes

Size-Optimized Silver Nanowires with Graphene Oxide for High-Performance Transparent Electrodes

Fabrication of silver nanowire transparent electrodes at room temperature

Highly Sensitive, Low Hysteretic and Flexible Strain Sensor Based on Ecoflex-AgNWs- MWCNTs Flexible Composite Materials