Abstract:The incorporation of rare-earth elements in wurtzite nitride semiconductors, e.g., scandium alloyed aluminum nitride (ScAlN), promises dramatically enhanced piezoelectric responses, critical to a broad range of acoustic, electronic, photonic, and quantum devices and applications. Experimentally, however, the measured piezoelectric responses of nitride semiconductors are far below what theory has predicted. Here, we show that the use of a simple, scalable, post-growth thermal annealing process can dramatically boost the piezoelectric response of ScAlN thin films. We achieve a remarkable 3.5-fold increase in the piezoelectric modulus, d33 for 30% Sc content ScAlN, from 12.3 pC/N in the as-grown state to 45.5 pC/N, which is eight times larger than that of AlN. The enhancement in piezoelectricity has been unambiguously confirmed by three separate measurement techniques. Such a dramatic enhancement of d33 has been shown to impact the effective electromechanical coupling coefficient kt2 : increasing it from 13.8% to 76.2%, which matches the highest reported values in millimeter thick lithium niobate films but is achieved in a 100 nm ScAlN with a 10,000 fold reduction in thickness, thus promising extreme frequency scaling opportunities for bulk acoustic wave resonators for beyond 5G applications. By utilizing a range of material characterization techniques, we have elucidated the underlying mechanisms for the dramatically enhanced piezoelectric responses, including improved structural quality at the macroscopic scale, more homogeneous and ordered distribution of domain structures at the mesoscopic scale, and the reduction of lattice parameter ratio (c/a) for the wurtzite crystal structure at the atomic scale. Overall, the findings present a simple yet highly effective pathway that can be extended to other material families to further enhance their piezo responses.

Reducing Energy Dissipation and Surface Effect of Diamond Nanoelectromechanical Resonators by Annealing in Oxygen Ambient

Single layer diamond - A new ultrathin 2D carbon nanostructure for mechanical resonator

Reducing Intrinsic Energy Dissipation in Diamond-on-diamond Mechanical Resonators Toward One Million Quality Factor

Oxygen-termination effect on the surface energy dissipation in diamond MEMS

Electrical readout/characterization of single crystal diamond (SCD) cantilever resonators

Elastic Strain Engineered Nanomechanical GaN Resonators with Thermoelastic Dissipation Dilution Up to 600 K

Low-Temperature Characteristics of an AlN/Diamond Surface Acoustic Wave Resonator

Effect of annealing on mechanical quality factor of fused quartz hemispherical resonator

Thermal treatments and gas adsorption influences on nanomechanics of ultra-thin silicon resonators for ultimate sensing

Annealing reduces microwave-frequency dielectric loss in superconducting resonators

Annealing reduces Si$_3$N$_4$ microwave-frequency dielectric loss in superconducting resonators

Electrical Actuation and Readout in a Nanoelectromechanical Resonator Based on a Laterally Suspended Zinc Oxide Nanowire

Impact Of Doping And Microstructure On Quality Factor Of Cvd Diamond Micromechanical Resonators

Refining silicon nitride waveguide quality through femtosecond laser annealing

Ultralow Dissipation Nanomechanical Devices from Monocrystalline Silicon Carbide

Single-Crystal Diamond Nanomechanical Resonators with Quality Factors exceeding one Million

Surface-engineered Nanoscale Diamond Films Enable Remarkable Enhancement in Thermal Conductivity and Anisotropy

Bulk acoustic wave resonance characteristic modified by reducing the defects in ZnO-based solidly mounted resonators

Unveiling the tradeoff between device scale and surface nonidealities for an optimized quality factor at room temperature in 2D MoS2 nanomechanical resonators

Unprecedented Enhancement of Piezoelectricity in Wurtzite Nitride Semiconductors via Thermal Annealing

Long-Term Aging Study of a Silicon Nitride Nanomechanical Resonator