Abstract:The abnormal vibration of a screw compressor discharge piping had caused the fatigue failure of some thermocouple branches and the unplanned shut down of the system. The causes of the vibration were investigated through acoustic simulation and mechanical analysis of the discharge piping,together with fi eld measurement. It was found that the excessive pulsation,low stiff ness and the fi rst-order structure resonance occurred on the thermocouple branches were the key factors inducing the vibration. Based on the analysis results,reasonable vibration elimination treatments were taken by adding a pulsation attenuator and some pipe supports,changing the arrangement of the discharge piping and reinforcing the thermocouple branches. After the modifi cations,the pressure unevenness all over the discharge piping could meet the requirements of API 619 and the maximum pressure unevenness dropped from 15.50% to 1.53%;the fi rst order natural frequency of the discharge piping increased from 0.90 Hz to 1.67 Hz and the high order natural frequency was away from±10% of the compressor excitation frequency;the first order natural frequency of the thermocouple branches increased from 207.41 Hz to 280.68 Hz and the low order resonance was avoided;the maximum vibration amplitude of the discharge piping dropped from 0.070 mm to 0.017 mm and dropped by 76%;the maximum vibration velocity decreased from 38.8 mm/s to 10.6 mm/s and dropped by 73%. It was indicated that the modifi cations were eff ective.

Modal and Vibration Analysis of Filter System in Petrochemical Plant

Analysis and Controlling of Pipeline Vibration in Chemical Plant

Modal Analysis and Structure Design for Hydraulic Muffler

Filtering Characteristics of String Hydraulic Pulsation Attenuator

Reason Analysis and Improvement on the Exhaust Pipeline Vibration of Diaphragm Com-pressor in a Chemical Plant

Vibration Analysis of Recycle Hydrogen Compressor Pipeline

Modal Analysis of the Aircraft Hydraulic-System Pipeline

Research of Modal Analysis for Impeller of Reactor Coolant Pump

Vibration Analysis and Rebuilding for Superhigh Pressure Reciprocating Compressor

Test and Analysis of Multi-Cavity Particle Damper for Vertical Vibration Control of Pipeline Structures

Model Analysis and System Parameters Investigation for Transient Wave in a Pump–Pipe–Valve System

Analysis and Control of Discharge Piping Vibration of a Screw Compressor Used in a Chemical Plant

Vibration FEA of Clamped Fluid-conveying Pipeline with Fluid-structure Interaction Effect

Vibration Analysis and Control of a Screw Compressor Outlet Piping System

Cyclostationary Approach to Detect Flow-Induced Effects on Vibration Signals from Centrifugal Pumps

Vibration and pressure pulsation elimination in a reciprocating compressor suction system using an acoustic filter

Test and analysis of multi-cavity particle damper for horizontal vibration control of pipeline structures

Natural Frequency Analysis of Horizontal Piping System Conveying Low Viscosity Oil–Gas–Water Slug Flow

Vibration Control of Reinjection Pump Room Pipeline System Based on Dynamic Characteristic Analysis

Study on Pipeline Self-Excited Vibration Using Transient Fluid-Structure Coupling Method

Analytical Study of Piping Flow-induced Vibration . Example of Implementation