Abstract:A coalescer system installed downstream of reciprocating compressor was subjected to abnormal vibration of 40.1 mm/s when operating at the design processing capacity, which far exceeded the allowable limits of 18 mm/s. The paper presents a study of vibration measurements, identification, analysis and mitigation to control such problem. Experimental modal test using impact hammer was performed to determine the mechanical natural frequencies of the coalescer system. Vibration and pressure measurements in combination with frequency spectrum analysis were carried out at several measuring locations on site to identify the cause of vibration. It was found that the excessive vibration was due to vortex shedding induced mechanical resonance because of the coincidence between vortex shedding frequency and the mechanical natural frequency of coalescer system. A recommendation for vibration mitigation was proposed by installing one clamp and two braces to keep these frequencies apart. The structural model of the original coalescer system was modeled and validated by the comparison with the experimental modal result. The locations of clamp and braces were determined by modal analysis to avoid resonance condition. Resonance analysis and frequency response analysis using finite element method were conducted, which results showed both mechanical resonance and acoustic resonance can be avoided and a small displacement was obtained at vortex shedding frequency for vibration mitigation measure proposed. The coalescer system was modified by installation of clamp and braces. Field measurements after modification indicated the vibration severity was reduced to the allowable limits defined by standards API 618 and ISO 20816-1. The operation of the modified coalescer system was greatly improved, which reduced the risk of fatigue failure due to excessive vibration.

Vibration Analysis and Control of a Screw Compressor Outlet Piping System

Analysis and Control of Discharge Piping Vibration of a Screw Compressor Used in a Chemical Plant

Analysis and Controlling of Pipeline Vibration in Chemical Plant

Vibration Analysis of Reciprocating Compressor's Outlet Pipeline

Vibration Analysis and Control of Superhigh Pressure Compressor and Pipeline System

Vibration Analysis and Reduction Optimization Study of a Reciprocating Compressor Piping System under Multi-Boundary Coupling

Vibration Analysis and Rebuilding for Pipeline of Superhigh Pressure Compressor

VIBRATION MEASUREMENT AND CONTROL OF A LARGE SCALE COMPRESSOR-PIPELINE SYSTEM

Vibration cause analysis and elimination of reciprocating compressor inlet pipelines

Simulation of Superhigh Pressure Compressor Pipeline System Vibration Control

Research on Vibration Control in a Reciprocating Compressor Piping System Using an Orifice Tube Structure

Pipeline Vibration Reduction of Reciprocating Compressor

Analysis on Gas Pulsation and Piping Vibration in the Piping System of Natural Gas Compressor

Reciprocating Compressor Piping System Vibration Studies

Vibration Analysis and Transformation of Hyper Compressor Pipeline for LDPE Plants

Reason Analysis and Improvement on the Exhaust Pipeline Vibration of Diaphragm Com-pressor in a Chemical Plant

Vibration and pressure pulsation elimination in a reciprocating compressor suction system using an acoustic filter

The Vibration Analysis and Transform of Export Pipeline Connected to Reciprocating Compressor Based on Ansys

Analysis of Vibration Cause and Damping Design to Lubricating Oil Pipe of 10-K-302C Compressor Based on Numerical Simulation

Experimental and Numerical Analysis for Vibration Identification and Mitigation of a Coalescer System

Application of Equivalent Parameters of Joints in Vibration Control of a Reciprocating Compressor Pipeline