A Novel Two-Dimensional Reflective Coherent Gradient Sensor and Its Applications in Residual Deformation Measurement of Laser Repaired Metal Components
Qixia Zhong,Chuanqing Geng,Huimin Xie,Jiaqiang Li
DOI: https://doi.org/10.1016/j.optlaseng.2023.107683
IF: 5.666
2023-01-01
Optics and Lasers in Engineering
Abstract:Directed Energy Deposition (DED), known as an important branch of additive manufacturing, are becoming in-creasingly crucial in different industrial fields. However, this extreme manufacturing process may bring about quality issues for the DED product, and in-situ monitoring for characterizing mechanical parameters of thick DED products still needs to be improved. In this manuscript, for the convenient in-situ bidirectional residual deforma-tion measurement of thick DED metal components, a novel two-dimensional coherent gradient sensor (2D-CGS) is established based on crossed Ronchi gratings. Firstly, the diffraction characteristic of the crossed Ronchi grating used in 2D-CGS is analyzed, and then the principles of 2D-CGS are analyzed in detail for bidirectional out-of-plane displacement gradient measurement. Furthermore, two temporal phase-shifting techniques: plane-parallel plate rotating (PPR) method and prism translation (PT) method, are extended from one dimension to 2D for improving the accuracy of 2D-CGS post-processing, named as 2D-PPR method and 2D-PT method. Verification experiment shows that the 2D-CGS system can synchronously measure the bidirectional curvature fields of the standard spherical reflector with the maximum relative error of 3.80%, which is equivalent to the accuracy of typical CGS. Finally, in the application of zig-zag deposited DED process, the bidirectional residual deformation fields of repaired components are in-situ monitored by portable 2D-CGS system, and the relationship of dwell time between adjacent tracks and the residual deformation is analyzed based on bidirectional centerline curvature on the bottom surface of substrate. A new parameter named as the orthotropic symmetry coefficient is defined based on curvature to analyze the full-field in-plane orthogonal anisotropy. Results show that both the degree of in-plane orthogonal anisotropy and value of residual deformation decreases with the increase of dwell time from 0 to 5 s, while varying a little with the dwell time exceeding 5 s, which also indicates the proposed parameter could well evaluate the degree of full-field orthotropic anisotropy. Meanwhile, the position of maximum curvature also gradually moves from the end toward the beginning in deposition direction. In summary, the proposed 2D-CGS method can measure the full-field bidirectional deformation in high efficiency, which may be promising in future in-situ monitoring applications.