Abstract:The stress intensity factor is important for understanding crack initiation and propagation. Because it cannot be measured directly, the characterization of the stress intensity factor relies on the measurement of deformation around a crack tip. Such measurements are challenging for dynamic fracture of brittle materials where the deformation is small and the crack tip velocity can be high (>1 km/s). Digital gradient sensing (DGS) is capable of full-field measurement of surface deformation with sub-microsecond temporal resolution, but it is limited to centimeter-scale specimens and has a spatial resolution of only $\sim 1$mm. This limits its ability to measure deformations close to the crack tip. Here, we demonstrate the potential of Shack-Hartmann wavefront sensing (SHWFS), as an alternative to DGS, for measuring surface deformation during dynamic brittle fracture of millimeter-scale specimens. Using an commercial glass ceramic as an example material, we demonstrate the capability of SHWFS to measure the surface slope evolution induced by a propagating crack on millimeter-scale specimens with a micrometer-scale spatial resolution and a sub-microsecond temporal resolution. The SHWFS apparatus has the additional advantage of being physically more compact than a typical DGS apparatus. We verify our SHWFS measurements by comparing them with analytical predictions and phase-field simulations of the surface slope around a crack tip. Then, fitting the surface slope measurements to the asymptotic crack-tip field solution, we extract the evolution of the apparent stress intensity factor associated with the propagating crack tip. We conclude by discussing potential future enhancements of this technique and how its compactness could enable the integration with other characterization techniques including x-ray phase-contrast imaging (XPCI) toward a multi-modal characterization.

The Application of Coherent Gradient Sensing Interference Measurement in Static Fracture Mechanics Experiments

Coherent Gradient Sensing Interferometry Technology and Its Application

Fracture investigation at V-notch tip using coherent gradient sensing (CGS)

Improvement of measurement error for modified coherent gradient sensing

Fracture investigation of PMMA specimen using coherent gradient sensing (CGS) technology

Visualization of Crack Tip Behaviour in Functionally Gradient Materials Using Coherent Gradient Sensing (CGS)

Fracture visualization using hybrid optical technique combining coherent gradient sensing (CGS) with caustics

Enhancement of Constant Normal Stiffness Direct Shear Testing Protocols for Determining Geomechanical Properties of Fractures

Fracture assessments of blunt V-notches using the coherent gradient sensing (CGS) method

Mixed-Mode Fracture Investigation of Pmma with Initial Single/Double Crack(S) Interference Using Phase-Shifted Coherent Gradient Sensing Method

A Novel Phase Shifting Technique of Coherent Gradient Sensing Method for Measuring Crack-tip K -Dominance

Laboratory Simulation of Flow Through Rough-Walled Microfractures under High Hydraulic Gradient

Experimental Investigation of the Quasi-Static Fracture Behavior of Functionally Graded Materials

Digital Gradient Sensing (DGS) Method and Its Application in Fracture Mechanics of Transparent Parts Used in Aviation

Mapping Static and Dynamic Crack-Tip Deformations Using Reflection-Mode Digital Gradient Sensing: Applications to Mode-I and Mixed-Mode Fracture

Investigation of Crack Tip Evolution in Functionally Graded Materials Using Optical Caustics

EXPERIMENTAL STUDY ON FRACTURE BEHAVIOR OF LINEAR FUNCTIONALLY GRADIENT MATERIALS

Shack-Hartmann wavefront sensing: A new approach to time-resolved measurement of stress intensity during dynamic fracture of small brittle specimens

Caustics Analysis of the Crack Initiation and Propagation of Graded Materials

Full-field measurement of nonuniform stresses of thin films at high temperature.

Dynamic Fracture of Mode I Crack in Orthotropic Composites Studied by Caustics Method