Abstract:Pneumatic technology takes compressed gas as the power source, but the leakage of gas in the pipeline due to poor sealing or pipeline rupture affects the accuracy of pneumatic control, the flow of gas transmission, and even the emission of harmful gas. The air tightness of differential pressure method has broad significance in the study of tight leakage because of its simple operation, short detection time, and high precision. Bubbling method, acoustic emission detection method, and direct pressure detection method have the characteristics of difficult operation, environmental sensitivity and low detection accuracy. They are not suitable for effective and high-precision detection of leakage in harsh environment. The air tightness detection method of differential pressure method has the advantages of simple operation, short detection time, and high accuracy. It has extensive significance in the research of air tightness leakage. At present, the focus of differential pressure method is to keep the same charging state of the master tank and the tested tank. However, when the shape of the tested tank is irregular or difficult to copy, the influence of different master tank on differential pressure method leakage detection needs to be considered. In this study, a gas leakage flow calculation model is established. The influence of the inherent parameters of the master tank on the calculation of the pressure difference, temperature difference, and leakage between the two cavities is analyzed in the simulation. Finally, the master tank is set as a quasi-isothermal cavity, and the tested tank is set as 3 L and 5 L air tanks for leakage test. The maximum error of experiment of 3 L tank reaches 39 mL/min at the later stage of measurement, with a detection deviation of 14.4%. The maximum error of experiment of 5 L tank is 412.4 mL/min, with a deviation rate of 28.3%. This method can detect leakage with high precision in harsh environment.

Analysis of Temperature Effect on Differential Pressure Method for Air Leak Detection

Study of differential pressure method for air leak detection based on tempretrue

Analysis on Influence Factors of Differential Pressure Detection of Gas Leakage

Correction To: Gas Leakage Detection and Pressure Difference Identification by Asymmetric Differential Pressure Method

Research on Improving the System Sensitivity for Hot Helium Leak Test

Temperature Effect Compensation for Fast Differential Pressure Decay Testing

On Differential Pressure Fluctuation Signals of Gas-Liquid Two-Phase Flow in Small-Size Pipe

Effect of Probe-Gas Type and Pressure and Calibration Method on Leakage Rate Calibration of Deuterium

Theoretical investigation on heat leakage distribution between vapor and liquid in liquid hydrogen tanks

Impact of Pressure Difference on Leakage Rate from Rigid Positive Standard Leak:A Theoretical and Experimental Study

A study on a real-time leak detection method for pressurized liquid refrigerant pipeline based on pressure and flow rate

Error Analysis of Gas and Liquid Flow Rates Metering Method Based on Differential Pressure in Wet Gas

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

Relationship between fluctuating differential pressure and void fraction of gas-liquid two-phase flow in Venturi tube

Air-leakage and checking method of thermal analysis instrument

Thermodynamical analysis of the effect of environmental conditions on measurement error of bell prover

Research on Leakage Measurement Methods of Coupling Clamps for Aircraft Tubing

Simultaneous Determination of Gas Leakage Location and Leakage Rate Based on Local Temperature Gradient

EXPERIMENTAL RESEARCH ON THE INFLUENCE OF AIR IN-LEAKAGE UPON CONDENSER PERFORMANCE

Assessing the impact of pressure drop and leak distribution on ductwork airtightness measurements

The research of test system of automobile vacuum booster master cylinder seal characteristic based on differential pressure sensor and LabVIEW