Abstract:lattice Boltzmann high-density-ratio model, which uses diffuse interface theory to describe the interfacial dynamics and was proposed originally by Lee and Liu (J Comput Phys 229:8045–8063, 2010 ), is extended to simulate immiscible multiphase flows in porous media. A wetting boundary treatment is proposed for concave and convex corners. The capability and accuracy of this model is first validated by simulations of equilibrium contact angle, injection of a non-wetting gas into two parallel capillary tubes, and dynamic capillary intrusion. The model is then used to simulate gas displacement of liquid in a homogenous two-dimensional pore network consisting of uniformly spaced square obstructions. The influence of capillary number ( Ca ), viscosity ratio ( M ), surface wettability, and Bond number ( Bo ) is studied systematically. In the drainage displacement, we have identified three different regimes, namely stable displacement, capillary fingering, and viscous fingering, all of which are strongly dependent upon the capillary number, viscosity ratio, and Bond number. Gas saturation generally increases with an increase in capillary number at breakthrough, whereas a slight decrease occurs when Ca is increased from 8.66× 10^-4 to 4.33× 10^-3 , which is associated with the viscous instability at high Ca . Increasing the viscosity ratio can enhance stability during displacement, leading to an increase in gas saturation. In the two-dimensional phase diagram, our results show that the viscous fingering regime occupies a zone markedly different from those obtained in previous numerical and experimental studies. When the surface wettability is taken into account, the residual liquid blob decreases in size with the affinity of the displacing gas to the solid surface. Increasing Bo can increase the gas saturation, and stable displacement is observed for Bo>1 because the applied gravity has a stabilizing influence on the drainage process.

Discontinuous pinning effect by a hole row to the gas-liquid interface in a parallel gap

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

Pinning Effects of Wettability Contrast on Pendant Drops on Chemically Patterned Surfaces

Pinning in a Contact and Noncontact Manner: Direct Observation of a Three-Phase Contact Line Using Graphene Liquid Cells

The pinning dynamics of a non-wetting droplet penetrating a permeable substrate

Morphological Characteristics of Gas-Liquid Interfaces Receding Through the Mesoscopic Gap with a Sharp Feature

Effects of Two Internals on Pinning in a Rectangular Moving Bed with Cross Flow of Gas

Pinning-depinning transition of droplets on inclined substrates with a three-dimensional topographical defect

Effect of fine metallic Z-pin on compressive property of open-hole composite laminate

Pinning Effect on the Phase Separation Dynamics of Thin Polymer-Dispersed Liquid Crystals.

Out-of-plane Properties and Failure Mechanism of Composite Laminates Reinforced with Carbon Z-pins

New Mechanisms of Helical Dislocation Formation Via the Pinch-off Process Near a Nano-Inhomogeneity

Investigation of Pinning in Moving Bed

Modeling Study of the Particle Pinning Effect on the Grain Boundary Movement

Droplet control based on pinning and substrate wettability

Effect of Pin-Fins on the Onset of Flow Instability of Water in Silicon-Based Microgap

Strong pinning transition with arbitrary defect potentials

Time-Dependent Pinning of Nanoblisters Confined by Two-Dimensional Sheets. Part 2: Contact Line Pinning.

The Vortex Dynamics of a Ginzburg-Landau System under Pinning Effect

Quantitative calculation of bubble pinning to grain boundary: a phase-field study

Pore-Scale Simulations of Gas Displacing Liquid in a Homogeneous Pore Network Using the Lattice Boltzmann Method