Abstract:Assembly and boundary conditions of finite element model for Z‐pin reinforced laminates. A voronoi user material subroutine (VUMAT) was developed using the three‐dimensional Hashin damage criterion and exponential nonlinear damage evolution method. An interlayer damage model based on the quadratic nominal stress (QUADS) criterion and B‐K fracture criterion was introduced, and a finite element model of Z‐pin reinforced composite laminates under low‐velocity impact was established. The low‐velocity impact behavior of Z‐pin reinforced composite laminates with different impact velocities (0.6 m/s, 0.4 m/s, and 0.3 m/s), different layup forms ([0°/90°]4 and [0°/45°/90°/−45°]2), and different Z‐pin spacing (4 mm, 8 mm, and 16 mm) was studied using ABAQUS. The results indicate that different layup forms have little effect on the low‐velocity impact behavior of Z‐pin reinforced composite laminates. The Z‐pin spacing has a significant influence on the low‐velocity impact behavior of Z‐pin reinforced composite laminates. When the impact velocity is 0.4 m/s, the specific energy absorption of composite laminates with Z‐pin spacing of 16 mm is 85.93% and 87.7% lower than that of composite laminates with Z‐pin spacing of 4 mm and 8 mm. As the Z‐pin spacing decreases (Z‐pin density increases), the impact resistance of Z‐pin reinforced composite laminates first increases and then decreases. Highlights • The low‐velocity impact of Z‐pin reinforced composite laminates was studied. • Analyzed the effect of layup forms of laminates on their impact behavior. • Explored the influence mechanism of Z‐pin spacing on the impact behavior. • Studied the energy absorption of different Z‐pin spacing under impact velocity.

Effect of fine metallic Z-pin on compressive property of open-hole composite laminate

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Minimizing the In-Plane Damage of Z-pinned Composite Laminates Via a Pre-Hole Pin Insertion Process

Out-of-plane Properties and Failure Mechanism of Composite Laminates Reinforced with Carbon Z-pins

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Enhancement of Composite Open-Hole Tensile Strength Via Fine Z-pins Arrangements

Micro-damage Initiation Evaluation of Z-Pinned Laminates Based on a New Three-Dimension RVE Model

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Effect of Z-pin Insertion Angles on Low-Velocity Impact Mechanical Response and Damage Mechanism of CFRP Laminates with Different Layups

Influence of Z‐pin material on the mechanical properties of fine Z‐pin reinforced composites

Investigation of the hygrothermal effects on in-plane failure mechanisms of fine Z-pinned laminates

A Novel Model of Z-pin Insertion in Prepreg Based on Fracture Mechanics

A Mechanistic Predictive Model for Ultrasound Guided Insertion Process of Ø 0.11 Mm Z-pins

Balance Interlaminar Improvement and In-Plane Adverse Impact of Hexagonal Semi-Embedded Fine Z-pin Reinforced Polymer Composite

Effect of Z-pin inclined angle on the impact damage suppression effectiveness for cross-ply composite laminates

A comparative study on failure mechanisms of open-hole and filled-hole composite laminates: Experiment and numerical simulation

Using z-pinning to improve the low-velocity impact performance of composite skin/stringer structures

Low‐velocity impact resistance of the Z‐pin reinforced carbon fiber composite laminates

Mode II Interlaminar Fracture Toughness Enhancement of Fine Z‐pin Reinforced Carbon Fiber Composite with Low Fraction of Pins

Fatigue life assessment and damage evolution in Z-pinned laminates