Abstract:It has been shown experimentally that the Hall-Petch relation of nanocrystalline (NC) metal will be broken down when the average grain size (d) is below a critical value, but the mechanism behind this remains to be quantitatively analyzed. In order to capture the subtle evolution of grain boundaries (GBs), we recently developed a novel algorithm by using moving least-squares (MLS) interpolant. Moreover, the phase field model is used to build NC copper with more natural and physical GBs for molecular dynamics (MD) tensile simulation. The results show that the variation of stress at GBs (σGB) and at grain interiors (σGI) in the elastic stage are in good agreement with previous study. The σGB exhibits periodic vibration, while σGI shows a linear behavior. From the stress distribution, we find that the increased σGB in one cycle can make the σGI increase. The microplasticity of GBs occurs when σGB increases to a peak value, which attenuates the stress concentration and then leads to the decrease of the σGB. Therefore, the σGI can be affected by the frequency of vibrated σGB. The fast Fourier transform (FFT) results show that the dominant frequency for the model with d of 13.8 nm is larger than that for other models, which causes a larger Young's modulus in the model. The GBs and GIs supplement each other during deformation: GBs providing an extra stress to GIs, GIs supplying the space for microplasticity of GBs. Besides, the fraction of deformed GBs and rotated GBs in the model are also large. GB activities are the results of overall microplasticity before σGB = σGI and deformation during the plastic stage. The rotated GBs results in the emission of many Shockley partial dislocation (partials) from GBs since they create larger paths for dislocation movement. Thus, many twinning boundaries (TBs) are generated in the model with d of 13.8 nm by partials gliding on the successive plane of adjacent stacking faults (SFs) structures, which plays an important role in work hardening of NC Cu.

Quantitative calculation of bubble pinning to grain boundary: a phase-field study

Modeling Study of the Particle Pinning Effect on the Grain Boundary Movement

The Instability of Monodisperse Bubbles Passing Through a Confined Geometry

Phase Field Study of Second Phase Particles-Pinning on Strain Induced Grain Boundary Migration

Particle pinning during grain growth -- A new analytical model for predicting the mean limiting grain size but also grain size heterogeneity in a 2D polycrystalline context

Influences of particle fractions on second-phase particles pinning grain coarsening processes

Phase Field Crystal Study of Grain Boundary Structure and Annihilation Mechanism in Low-Angle Grain Boundary

Quantifying the influence of grain boundary activities on Hall-Petch relation in nanocrystalline Cu by using phase field and atomistic simulations

Influence of grain boundaries on the loop-punching mechanism and shape of helium bubbles in tungsten

Discontinuous pinning effect by a hole row to the gas-liquid interface in a parallel gap

Phase Field Simulation of Single Bubble Behavior under Magnetic Field

Arrangement and Decomposition of Grain Boundary Dislocations: Two-Mode Phase-Field Crystal Simulation

A Study of Strain-Driven Nucleation and Extension of Deformed Grain: Phase Field Crystal and Continuum Modeling

Phase-Field Modeling of Microstructure Evolution in the Presence of Bubble During Solidification

Phase Precipitation on Grain Boundaries in Binary Alloys: A Monte-Carlo Approach

Influences of Second Phase Particle Precipitation, Coarsening, Growth or Dissolution on the Pinning Effects during Grain Coarsening Processes

Simulation of Single Bubble Dynamic Process in Pool Boiling Process under Microgravity Based on Phase Field Method

Direct measurement of the maximum pinning force during particle-grain boundary interaction via molecular dynamics simulations

Uniform pinning force model for the polycrystalline systems pinned by second-phase particles of different sizes, number densities and shapes

Hot Cracking Susceptibility Prediction from Quantitative Multi-Phase Field Simulations with Grain Boundary Effects

Modeling Grain Boundaries using a Phase Field Technique