Abstract:Determination of the failure pressure of pipelines containing multiple corrosion defects is critical to the integrity and safety of the pipeline infrastructure. In this work, finite element models were developed to determine the failure pressures of X46, X60 and X80 steel pipelines containing multiple corrosion defects with varied geometries and orientations by assessing the mutual interaction of the defects and the effect on pipeline integrity. Generally, the failure pressure of corroded pipelines decreases with the increasing interaction effect between corrosion defects. The interaction effect mainly depends on the mutual orientation of the defects and their geometry and spacing, rather than the steel grade. For longitudinally and circumferentially aligned corrosion defects present on a pipeline, the interaction effect between them does not exist when their spacing is larger than 2.5 Dt and 5.3 t, respectively, where D and t are diameter and wall thickness of the pipeline. As a result, the multiple defects can be assessed individually. Compared to circumferential corrosion defects, the longitudinal defects are associated with a larger spacing where the interaction effect between corrosion defects exists. The circumferential spacing of corrosion defects has a less impact on the failure pressure of corroded pipelines compared with the longitudinal spacing. For pipelines containing overlapped corrosion defects, the failure pressure is lowered, compared to that in the presence of a single top layer defect only. An increase in the depth of either top or bottom layer corrosion defect reduces the failure pressure of the pipeline. The increased length of the defect also increases the interaction effect between the overlapped defects, lowering the failure pressure of the pipeline.

On the Influence of Interacting Dual Defects on the Collapse Pressure of Pipes under External Pressure

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

On the Collapse of Thick-Walled Pipes with Corrosion Defects under External Pressure

On the collapse of thick-walled steel pipes under coupling initial geometric imperfection and corrosion defect

Strength Differential Effect and Influence of Strength Criterion on Burst Pressure of Thin-Walled Pipelines

Experimental and numerical studies on collapse of subsea pipelines with interacting corrosion defects

Buckle Propagation of Sandwich Pipes under External Pressure

Theoretical analysis of the collapse behaviour of subsea pipelines with corrosion defects under external pressure

Collapse of pipes with non-uniform corrosion defects under external pressure: A reverse inversion modeling method

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Interaction between internal and external defects on pipelines and its effect on failure pressure

Effect of interaction between corrosion defects on failure pressure of thin wall steel pipeline

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Assessment by finite element modeling of the interaction of multiple corrosion defects and the effect on failure pressure of corroded pipelines

Assessment of the interaction of corrosion defects on steel pipelines under combined internal pressure and longitudinal compression using finite element analysis

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Confined Collapse of Unbonded Multi-Layer Pipe Subjected to External Pressure

Failure Pressure Analysis of the Pipe with Inner Corrosion Defects by FEM