Deformation Mechanisms in High-Efficiency Thermoelectric Layered Zintl Compounds

Guodong Li,Umut Aydemir,Max Wood,Qi An,William A. Goddard,Pengcheng Zhai,Qingjie Zhang,G. Jeffrey Snyder

DOI: https://doi.org/10.1039/c7ta02080e

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:We use DFT to determine the deformation mechanism of Mg3Sb2, and propose a substitution strategy to enhance its mechanical strength.

What problem does this paper attempt to address?

The manipulation of substitutional defects for realizing high thermoelectric performance in Mg<sub>3</sub>Sb<sub>2</sub>-based Zintl compounds

Juan Li,Fei Jia,Shuai Zhang,Shuqi Zheng,Boyi Wang,Liqiang Chen,Guiwu Lu,Liming Wu

DOI: https://doi.org/10.1039/c9ta06889a

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:By optimizing the concentration of the substitutional defect PrMg1, Mg3.2Pr0.02Sb1.5Bi0.5 exhibits a peak zT value of 1.70 at 725 K.
Plastically Mg3(Sb,Bi)2-based thermoelectric compounds with enhanced texture via cold-deformation

Ziming Zhang,Zhiqiang Gao,Tingting Deng,Qingfeng Song,Lidong Chen,Shengqiang Bai

DOI: https://doi.org/10.1039/d4ta00161c

IF: 11.9

2024-02-27

Journal of Materials Chemistry A

Abstract:Mg3(Sb,Bi)2-based Zintl compounds have attracted lots of attention due to its high thermoelectric performance and good mechanical property. However, thermally activated mobility, which is ascribed to the grain boundary scattering, greatly limits its practically use. In this work, we reveal the plasticity of Mg3(Sb,Bi)2-based compounds in the compressive strength test. The ab-initio analysis indicates that this plasticity should be ascribed to the low slip barrier energy (~ 580 mJ/m2), which is only one third of the cleavage energy (~ 1600 mJ/m2). Based on this finding, we propose a cold-deformation procedure to elongate particles and to enhance texture, which successfully supress the grain boundary scattering. As a result, a high carrier mobility of 86.6 cm2 V-1 s-1 and a high power factor of 16.2 μW cm-1 K-2 in Mg3.1Bi1.5Sb0.49Te0.01 was obtained at room temperature. The plastic deformation capacity of Mg3(Sb,Bi)2 compounds provide a near-net-forming method to fabricate profiled devices at room-temperature, which will extend the application fields of thermoelectric techniques.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Effect of Anti-Site Point Defects on the Mechanical and Thermodynamic Properties of MgZn2, MgCu2 Laves Phases: A First-Principle Study

Shuo Wang,Yuhong Zhao,Hua Hou,Zhiqin Wen,Peilin Zhang,Jianquan Liang

DOI: https://doi.org/10.1016/j.jssc.2018.04.001

IF: 3.3

2018-01-01

Journal of Solid State Chemistry

Abstract:A theoretical investigation on the effect of anti-site point defects on mechanical and thermodynamic properties of MgZn2 and MgCu2 based on the first-principles calculations has been implemented. The results show that Mg anti-site defect on Zn or Cu site plays a reinforcing role, while exhibiting a more brittle behavior. However, the defect phase of Cu anti-sites on Mg sublattice shows a ductile tendency. The temperature-dependent thermodynamic properties are also predicted along with Debye-Grüneisen model including Debye temperature, thermal expansion coefficient and vibrational heat capacity as well as vibrational entropy. Taking into account the contribution of the lattice vibration and thermal electronic excitations, the Helmholtz free energy F can be calculated, suggests that anti-site defects caused by the occupancy of Mg at the Zn or Cu site are thermodynamically unstable compared to the defect-free phases. In addition, the total amount of charge transfer, the overall and the local difference charge densities are further discussed to analyze the mechanism of mechanical properties.
Enhancing Thermoelectric Performance of AB2Sb2-type Zintl Phase Through Band Shaping and Lattice Distortion

Qi Xu,Kunpeng Zhao,Haoran Huang,Shun Wan,Qingyong Ren,Xiaowen Hao,Hexige Wuliji,Jingdan Lei,Tian-Ran Wei,Xun Shi

DOI: https://doi.org/10.1016/j.actamat.2024.120040

IF: 9.4

2024-01-01

Acta Materialia

Abstract:AB2Sb2-type Zintl phases, especially Mg3Sb2, have garnered widespread attention in virtue of their nontoxic constituent elements and outstanding thermoelectric performance in n-type materials. However, the p-type counterpart of AB2Sb2 still struggles with a low figure of merit zT, primarily because of the limited valence band degeneracy, large band effective mass, and relatively high thermal conductivity. Here we simultaneously optimize the electrical and thermal transports of p-type AB2Sb2-based materials through shaping the band edge and distorting the crystal lattice. By alloying Zn at Mg2 site and Ca at Mg1 site, we successfully decorate the crystal lattice of Mg3Sb2 in real space and thereby modify the band structure in reciprocal space. Zn alloying promotes the band degeneracy while Ca alloying reduce the single band effective mass, which largely promotes the transport of charge carriers. Moreover, the distorted crystal lattice effectively blocks the heat-carry phonons to reduce the lattice thermal conductivity κL. A high zT of 0.81 is finally realized at 750 K in our Zn/Ca co-alloyed samples, which is three times larger than that of Mg3Sb2 matrix. Our work opens new possibilities for the synthetic optimization of both electrical and thermal transports in Zintl phase and other thermoelectric systems.
Enhancing thermoelectric performance of AB 2 Sb 2 -type Zintl phase through band shaping and lattice distortion

Qi Xu,Kunpeng Zhao,Haoran Huang,Shun Wan,Qingyong Ren,Xiaowen Hao,Hexige Wuliji,Jingdan Lei,Tian-Ran Wei,Xun Shi

DOI: https://doi.org/10.1016/j.actamat.2024.120040

IF: 9.4

2024-05-26

Acta Materialia

Abstract:AB 2 Sb 2 -type Zintl phases, especially Mg 3 Sb 2 , have garnered widespread attention in virtue of their nontoxic constituent elements and outstanding thermoelectric performance in n-type materials. However, the p-type counterpart of AB 2 Sb 2 still struggles with a low figure of merit zT , primarily because of the limited valence band degeneracy, large band effective mass, and relatively high thermal conductivity. Here we simultaneously optimize the electrical and thermal transports of p-type AB 2 Sb 2 -based materials through shaping the band edge and distorting the crystal lattice. By alloying Zn at Mg2 site and Ca at Mg1 site, we successfully decorate the crystal lattice of Mg 3 Sb 2 in real space and thereby modify the band structure in reciprocal space. Zn alloying promotes the band degeneracy while Ca alloying reduce the single band effective mass, which largely promotes the transport of charge carriers. Moreover, the distorted crystal lattice effectively blocks the heat-carry phonons to reduce the lattice thermal conductivity κ L . A high zT of 0.81 is finally realized at 750 K in our Zn/Ca co-alloyed samples, which is three times larger than that of Mg 3 Sb 2 matrix. Our work opens new possibilities for the synthetic optimization of both electrical and thermal transports in Zintl phase and other thermoelectric systems.

materials science, multidisciplinary,metallurgy & metallurgical engineering
The manipulation of substitutional defects for realizing high thermoelectric performance in Mg3Sb2-based Zintl compounds

Juan Li,Fei Jia,Shuai Zhang,Shuqi Zheng,Boyi Wang,Liqiang Chen,Guiwu Lu,Liming Wu

DOI: https://doi.org/10.1039/c9ta06889a

IF: 11.9

2019-01-01

Journal of Materials Chemistry A

Abstract:The introduction of point defects by extrinsic doping is an effective way to optimize the carrier concentration. Here, we show theoretically and experimentally that Pr is a more effective dopant than Te in Mg3Sb2. Using first-principles defect calculations, the predicted highest carrier concentration with Pr doping at 725 K can be up to similar to 9.3 x 10(19) cm(-3), consistent with our experimental measurements. In addition, the point defects introduced by Pr substitution on the Mg sites lead the lattice thermal conductivity to be reduced to as low as 0.429 W m(-1) K-1. By optimizing the Pr doping concentration, Mg3.2Pr0.02Sb1.5Bi0.5 exhibits a peak zT value of 1.70 at 725 K.
Defect Modulation on CaZn1-xAg1-ySb (0 < X < 1; 0 < Y < 1) Zintl Phases and Enhanced Thermoelectric Properties with High Zt Plateaus

Min Zhu,Zhen Wu,Qian Liu,Tie-Jun Zhu,Xin-Bing Zhao,BaiBiao Huang,Xutang Tao,Sheng-Qing Xia

DOI: https://doi.org/10.1039/c8ta04001j

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Thermoelectric materials with high average figure of merit (zT) over the applied temperature range are crucial for power generation applications. In this report, a new Zintl series, CaZn1-xAg1-ySb (0 < x < 1; 0 < y < 1), was discovered and carefully investigated for their thermoelectric potential. These phases feature unique anionic layers with extensive Zn/Ag defects. Such a characteristic ensures very low intrinsic thermal conductivity and meanwhile considerably high electrical conductivity for the corresponding materials. For an optimized composition CaZn0.4Ag0.18Sb, decent thermoelectric performance was proved with a broad high zT plateau (zT approximate to 1.0) observed from 800 to 1100 K. The discovery of this new Zintl series not only provides us a valuable resource for exploring high zT materials, but also sheds some new light on the design of such thermoelectrics on the basis of defect modulation.
Intrinsic Mechanical Behavior of MgAgSb Thermoelectric Material: an Ab Initio Study

Guodong Li,Qi An,Umut Aydemir,Sergey Morozov,Bo Duan,Pengcheng Zhai,Qingjie Zhang,William A. Goddard

DOI: https://doi.org/10.1016/j.jmat.2019.11.002

IF: 8.589

2020-01-01

Journal of Materiomics

Abstract:α-MgAgSb based thermoelectric (TE) device attracts much attention for its commercial application because it shows an extremely high conversion efficiency of ∼8.5% under a temperature difference of 225 K. However, the mechanical behavior of α-MgAgSb is another serious consideration for its engineering applications. Here, we apply density functional theory (DFT) simulations to examine the intrinsic mechanical properties of all three MgAgSb phases, including elastic properties, shear-stress – shear-strain relationships, deformation and failure mechanism under ideal shear and biaxial shear conditions. We find that the ideal shear strength of α-MgAgSb is 3.25 GPa along the most plausible (100)<010> slip system. This strength is higher than that of β-MgAgSb (0.80 GPa) and lower than that of γ-MgAgSb (3.43 GPa). The failure of α-MgAgSb arises from the stretching and breakage of MgSb bond α-MgAgSb under pure shear load, while it arises from the softening of MgAg bond and the breakage of AgSb bond under biaxial shear load. This suggests that the deformation mechanism changes significantly under different loading conditions.
Multiscale Defects as Strong Phonon Scatters to Enhance Thermoelectric Performance in Mg2Sn1-xSbx Solid Solutions

Jiazhan Xin,Yang Zhang,Haijun Wu,Tiejun Zhu,Tiezheng Fu,Jiajun Shen,Stephen J. Pennycook,Xinbing Zhao

DOI: https://doi.org/10.1002/smtd.201900412

IF: 12.4

2019-01-01

Small Methods

Abstract:Mg2Sn based solid solutions have attracted much research interest due to their high thermoelectric (TE) performance in the mid-temperature region and abundant constituent elements. Further enhancement of the figure of merit zT lies in the effective reduction of the relatively high lattice thermal conductivity. It has been demonstrated that alloying high content of aliovalent Sb (>10%) in Mg2Si analogue can induce Mg vacancies and dense dislocations to greatly suppress the lattice thermal conductivity. In this work, the strategy is extended to the Sb alloyed Mg2Sn to enhance zT. Detailed microstructure investigations reveal the existence of high density of interstitial clusters. By introducing these nanostructures as the additional phonon scattering sources, the theoretical calculation well match the low experimental lattice thermal conductivity. Superior to the Sb alloyed Mg2Si, relatively high power factor is maintained in the Sb alloyed Mg2Sn and the maximum zT of 0.9 at 750 K is obtained. With simpler chemical composition though, the Mg2Sn1-xSbx (x > 0.1) has comparable TE performance with the Sb alloyed Mg2Si0.4Sn0.6 solid solutions, exhibiting promising potential for practical applications. The present work offers a comprehensive understanding of the effect of aliovalent alloying and concomitant complex microstructure in reducing thermal conductivity and enhancing zT.
Realizing high thermoelectric performance in p-type CaZn2Sb2-alloyed Mg3Sb2-based materials via band and point defect engineering

Lian Wu,Zizhen Zhou,Guang Han,Bin Zhang,Jian Yu,Hengyang Wang,Yao Chen,Xu Lu,Guoyu Wang,Xiaoyuan Zhou

DOI: https://doi.org/10.1016/j.cej.2023.145988

IF: 15.1

2023-11-01

Chemical Engineering Journal

Abstract:Layered Zintl-phase compound Mg3Sb2, possessing the advantages of high abundance, environmental friendliness, and low lattice thermal conductivity, are emerging materials for thermoelectric applications. However, p-type Mg3Sb2-based materials perform unfavorably than their n-type counterparts in terms of thermoelectric performance, which is mainly ascribed to undesirable valence band structure. Herein, we implement the strategy of alloying CaZn2Sb2 to achieve simultaneously improved electrical and thermal performance in p-type Mg3Sb2: (i) alloying CaZn2Sb2 not only optimizes the Seebeck coefficient, but also leads to improved carrier mobility; (ii) the mass and strain field fluctuations caused by alloying CaZn2Sb2 enhance phonon scattering, which significantly reduces the lattice thermal conductivity of the samples. By doping Ag in (Mg3.2Sb2)0.7(CaZn2Sb2)0.3 to realize higher electrical conductivity, the Mg2.22Ag0.02Ca0.3Zn0.6Sb2 sample reaches an excellent peak zT value of 0.90 at 823 K, which compares favorably to those of reported p-type Mg3Sb2-based materials. This study develops an effective pathway to advance thermoelectric performance of p-type Mg3Sb2-based materials.

engineering, chemical, environmental
High-performance Mg3Sb2-based thermoelectrics with reduced structural disorder and microstructure evolution

Longquan Wang,Wenhao Zhang,Song Yi Back,Naoyuki Kawamoto,Duy Hieu Nguyen,Takao Mori

DOI: https://doi.org/10.1038/s41467-024-51120-3

2024-08-09

Abstract:Mg3Sb2-based thermoelectrics show great promise for next-generation thermoelectric power generators and coolers owing to their excellent figure of merit (zT) and earth-abundant composition elements. However, the complexity of the defect microstructure hinders the advancement of high performance. Here, the defect microstructure is modified via In doping and prolonged sintering time to realize the reduced structural disorder and microstructural evolution, synergistically optimizing electron and phonon transport via a delocalization effect. As a result, an excellent carrier mobility of ~174 cm2 V-1 s-1 and an ultralow κ l a t of ~0.42 W m-1 K-1 are realized in this system, leading to an ultrahigh zT of ~2.0 at 723 K. The corresponding single-leg module demonstrates a high conversion efficiency of ~12.6% with a 425 K temperature difference, and the two-pair module of Mg3Sb2/MgAgSb displays ~7.1% conversion efficiency with a 276 K temperature difference. This work paves a pathway to improve the thermoelectric performance of Mg3Sb2-based materials, and represents a significant step forward for the practical application of Mg3Sb2-based devices.
Colossal Thermoelectric Enhancement in Cu2+xZn1−xSnS4 Solid Solution by Local Disordering of Crystal Lattice and Multi-Scale Defect Engineering

Qinghui Jiang,Haixue Yan,Yuanhua Lin,Yang Shen,Junyou Yang,Michael J. Reece

DOI: https://doi.org/10.1039/d0ta01595d

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Synergistic effects of Cu self-doping and hot forging of Cu2ZnSnS4 realize the decoupling of thermal and electric transport. And hot forging produces defects on different length scales and effectively optimize the electric and thermal conductivities.
Electronic Orbital Alignment and Hierarchical Phonon Scattering Enabling High Thermoelectric Performance P-Type Mg3Sb2 Zintl Compounds

Jinsuo Hu,Jianbo Zhu,Fengkai Guo,Haixu Qin,Yijie Liu,Qian Zhang,Zihang Liu,Wei Cai,Jiehe Sui

DOI: https://doi.org/10.34133/2022/9842949

IF: 11

2022-01-01

Research

Abstract:Environmentally friendly Mg3Sb2-based materials have drawn intensive attention owing to their promising thermoelectric performance. In this work, the electrical properties of p-type Mg3Sb2 are dramatically optimized by the regulation of Mg deficiency. Then, we, for the first time, found that Zn substitution at the Mg2 site leads to the alignment of px,y and pz orbital, resulting in a high band degeneracy and the dramatically enhanced Seebeck coefficient, demonstrated by the DFT calculations and electronic properties measurement. Moreover, Zn alloying decreases Mg1 (Zn) vacancies formation energy and in turn increases Mg (Zn) vacancies and optimizes the carrier concentration. Simultaneously, the Mg/Zn substitutions, Mg vacancies, and porosity structure suppress the phonon transport in a broader frequency range, leading to a low lattice thermal conductivity of ~0.47 W m-1 K-1 at 773 K. Finally, a high ZT of ~0.87 at 773 K was obtained for Mg1.95Na0.01Zn1Sb2, exceeding most of the previously reported p-type Mg3Sb2 compounds. Our results further demonstrate the promising prospects of p-type Mg3Sb2-based material in the field of mid-temperature heat recovery.
General design of high-performance and textured layered thermoelectric materials via stacking of mechanically exfoliated crystals

Yu-Ke Zhu,Yuxin Sun,Xingyan Dong,Li Yin,Ming Liu,Muchun Guo,Hao Wu,Fushan Li,Zhentao Guo,Xingyue Wang,Kuai Yu,Fengkai Guo,Qian Zhang,Zihang Liu,Wei Cai,Jiehe Sui

DOI: https://doi.org/10.1016/j.joule.2024.05.006

IF: 46.048

2024-08-23

Joule

Abstract:Layered materials show significant promise for thermoelectric applications, which critically rely upon microstructural texture to achieve superior performance. In this work, we proposed a novel strategy utilizing layered crystal stacking hot deformation (LCSHD) for rapid construction of pronounced texture in layered materials. Benefiting from the aligned layered structure, n-type Cu0.008Bi2Te2.7Se0.3-LCSHD samples demonstrated competitive thermoelectric properties and extraordinary performance in both power generation and solid-state refrigeration. This work proposes a new strategy to achieve strong texture and high performance in layered thermoelectric materials.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Hot Deformation Induced Defects and Performance Enhancement in FeSb2 Thermoelectric Materials

Yongzheng Wang,Chenguang Fu,Tiejun Zhu,Lipeng Hu,Guangyu Jiang,Guanghui Zhao,Dexuan Huo,Xinbing Zhao

DOI: https://doi.org/10.1063/1.4831668

IF: 2.877

2013-01-01

Journal of Applied Physics

Abstract:The effect of hot deformation induced defects and texture on thermoelectric properties of FeSb2 bulk crystals has been investigated. The transport properties of the samples along both parallel and perpendicular direction of pressing were measured from 3 K to 300 K. The results showed that thermal conductivity of the deformed samples was significantly reduced. After twice deformation, the thermal conductivity of the sample along the perpendicular direction of pressing was decreased to 4 W/mK, which was only one third of that before deformation. Transmission electron microscopy observation revealed the presence of high density of lattice defects in the deformed samples. The lattice thermal conductivity was analyzed using the Debye-Callaway approximation, and the results showed that the deformation induced lattice imperfections play an important role in enhancing phonon scattering. In addition, both the electrical resistivity and Seebeck coefficient exhibited a weak anisotropy in the deformed samples. The figure of merit ZT of the bulk FeSb2 was significantly improved from 0.010 to 0.021 after deformation.
Electronic Orbital Alignment and Hierarchical Phonon Scattering Enabling High Thermoelectric Performance p-Type Mg 3 Sb 2 Zintl Compounds

Jinsuo Hu,Jianbo Zhu,Fengkai Guo,Haixu Qin,Yijie Liu,Qian Zhang,Zihang Liu,Wei Cai,Jiehe Sui

DOI: https://doi.org/10.34133/2022/9842949

IF: 11

2022-04-29

Research

Abstract:Environmentally friendly Mg 3 Sb 2 -based materials have drawn intensive attention owing to their promising thermoelectric performance. In this work, the electrical properties of p-type Mg 3 Sb 2 are dramatically optimized by the regulation of Mg deficiency. Then, we, for the first time, found that Zn substitution at the Mg2 site leads to the alignment of p x , y and p z orbital, resulting in a high band degeneracy and the dramatically enhanced Seebeck coefficient, demonstrated by the DFT calculations and electronic properties measurement. Moreover, Zn alloying decreases Mg1 (Zn) vacancies formation energy and in turn increases Mg (Zn) vacancies and optimizes the carrier concentration. Simultaneously, the Mg/Zn substitutions, Mg vacancies, and porosity structure suppress the phonon transport in a broader frequency range, leading to a low lattice thermal conductivity of ~0.47 W m -1 K -1 at 773 K. Finally, a high ZT of ~0.87 at 773 K was obtained for Mg 1.95 Na 0.01 Zn 1 Sb 2 , exceeding most of the previously reported p-type Mg 3 Sb 2 compounds. Our results further demonstrate the promising prospects of p-type Mg 3 Sb 2 -based material in the field of mid-temperature heat recovery.

multidisciplinary sciences
Enhancing thermoelectric performance of Sb2Te3 through swapped bilayer defects

Jiangjing Wang,Chongjian Zhou,Yuan Yu,Yuxing Zhou,Lu Lu,Bangzhi Ge,Yudong Cheng,Chun-Lin Jia,Riccardo Mazzarello,Zhongqi Shi,Matthias Wuttig,Wei Zhang

DOI: https://doi.org/10.1016/j.nanoen.2020.105484

IF: 17.6

2021-01-01

Nano Energy

Abstract:Lattice defects are typically used to tailor the thermoelectric properties of materials. It is desirable that such defects improve the electrical conductivity, while, at the same time, reduce the thermal conductivity, for an overall improvement on the thermoelectric properties of materials. Here, we report on an extended defect in Sb2Te3 consisting of swapped bilayers with chemical intermixing of Sb and Te atoms, which can be generated and effectively manipulated in polycrystalline samples through synthetic methods and thermal treatments. The swapped bilayers bridge the spatial gaps between the Sb2Te3 quintuple-layer blocks, enhancing the charge carrier mobility and thus the electrical conductivity. These defects also result in a reduced lattice thermal conductivity through suppressing phonon transport. These synergistic effects contribute together to an improved thermoelectric quality factor and an enhanced figure of merit (zT) value in Sb2Te3.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Mg Vacancy and Dislocation Strains As Strong Phonon Scatterers in Mg2Si1−xSbx Thermoelectric Materials

Jiazhan Xin,Haijun Wu,Xiaohua Liu,Tiejun Zhu,Guanting Yu,Xinbing Zhao

DOI: https://doi.org/10.1016/j.nanoen.2017.03.012

IF: 17.6

2017-01-01

Nano Energy

Abstract:Mg2Si based solid solutions have unique advantages in the direct thermal to electrical energy conversion due to environmentally friendly and abundant constituent elements, and high thermoelectric performance. Further enhancing figure of merit zT of this materials system lies in the reduction of the relatively high lattice thermal conductivity. Alloying by high content of aliovalent Sb (> 10%) in Mg2Si can greatly suppress the lattice thermal conductivity, lower than conventional Mg-2(Si, Sn) solid solutions, due to the enhanced phonon scattering from Mg vacancy and concomitant strains. In this work, detailed microstructure observation for Sb alloyed Mg2Si reveal the existence of dense dislocations, around which the strip-like defects are viewed with isotropic strain. By introducing dislocations and vacancies as the additional phonon scattering sources, the model calculation can well match the experimental lattice thermal conductivity. The present work offers a comprehensive understanding of the role of vacancies and concomitant strains in reducing thermal conductivity, and may open a new venue for zT enhancement.
Point defect engineering and machinability in n-type Mg3Sb2-based materials

Juan Li,Shuai Zhang,Fei Jia,Shuqi Zheng,Xiaolei Shi,Daqiang Jiang,Siyu Wang,Guiwu Lu,Liming Wu,Zhi-Gang Chen

DOI: https://doi.org/10.1016/j.mtphys.2020.100269

IF: 11.021

2020-12-01

Materials Today Physics

Abstract:Approaching practical thermoelectric devices require high-performance and machinable thermoelectric materials. However, the currently available materials are usually brittle. In this work, Nd-doped Mg3Sb2-based compounds exhibit not only excellent thermoelectric performance but also superior machinability. Mg3.2Nd0.03Sb1.5Bi0.5 exhibits a high power factor of 20.6 μW cm−1 K−2 at 725 K and a peak zT of 1.8, which mainly originates from the increased n of ~8 × 1019 cm−3 by Nd/Mg substitutional defects. Defect calculations predict that other rare earth elements (Sm, Gd, Tb, Dy and Ho) have the same effect as Nd on Mg3Sb2 and the predicted highest achievable electron concentrations at 700 K are ~1020 cm−3. The measured hardness, Young's modulus and fracture toughness of Mg3.2Nd0.03Sb1.5Bi0.5 are 1.1 GPa, 49.8 GPa and 1.4 MPa m1/2, respectively. In addition, the sample can be easily machined into the dog-bone shape with external thread at both ends, indicating the excellent machinability of Mg3Sb2-based materials. This work suggests a bright future of Mg3Sb2-based thermoelectric materials for practical applications and device fabrication.

materials science, multidisciplinary,physics, applied
High Performance Mg2(Si,Sn) Solid Solutions: a Point Defect Chemistry Approach to Enhancing Thermoelectric Properties

guangyu jiang,jian he,tiejun zhu,chenguang fu,xiaohua liu,lipeng hu,xinbing zhao

DOI: https://doi.org/10.1002/adfm.201400123

IF: 19

2014-01-01

Advanced Functional Materials

Abstract:A point defect chemistry approach to improving thermoelectric (TE) properties is introduced, and its effectiveness in the emerging mid-temperature TE material Mg2(Si,Sn) is demonstrated. The TE properties of Mg2(Si,Sn) are enhanced via the synergistical implementation of three types of point defects, that is, Sb dopants, Mg vacancies, and Mg interstitials in Mg2Si0.4Sn0.6-xSbx with high Sb content (x > 0.1), and it is found that i) Sb doping at low ratios tunes the carrier concentration while it facilitates the formation of Mg vacancies at high doping ratios (x > 0.1). Mg vacancies act as acceptors and phonon scatters; ii) the concentration of Mg vacancies is effectively controlled by the Sb doping ratio; iii) excess Mg facilitates the formation of Mg interstitials that also tunes the carrier concentration; vi) at the optimal Sb-doping ratio near x approximate to 0.10 the lattice thermal conductivity is significantly reduced, and a state-of-the-art figure of merit ZT > 1.1 is attained at 750 K in 2 at% Zn doped Mg2Si0.4Sn0.5Sb0.1 specimen. These results demonstrate the significance of point defects in thermoelectrics, and the promise of point defect chemistry as a new approach in optimizing TE properties.

Deformation Mechanisms in High-Efficiency Thermoelectric Layered Zintl Compounds

The manipulation of substitutional defects for realizing high thermoelectric performance in Mg<sub>3</sub>Sb<sub>2</sub>-based Zintl compounds

Plastically Mg3(Sb,Bi)2-based thermoelectric compounds with enhanced texture via cold-deformation

Effect of Anti-Site Point Defects on the Mechanical and Thermodynamic Properties of MgZn2, MgCu2 Laves Phases: A First-Principle Study

Enhancing Thermoelectric Performance of AB2Sb2-type Zintl Phase Through Band Shaping and Lattice Distortion

Enhancing thermoelectric performance of AB 2 Sb 2 -type Zintl phase through band shaping and lattice distortion

The manipulation of substitutional defects for realizing high thermoelectric performance in Mg3Sb2-based Zintl compounds

Defect Modulation on CaZn1-xAg1-ySb (0 < X < 1; 0 < Y < 1) Zintl Phases and Enhanced Thermoelectric Properties with High Zt Plateaus

Intrinsic Mechanical Behavior of MgAgSb Thermoelectric Material: an Ab Initio Study

Multiscale Defects as Strong Phonon Scatters to Enhance Thermoelectric Performance in Mg2Sn1-xSbx Solid Solutions

Realizing high thermoelectric performance in p-type CaZn2Sb2-alloyed Mg3Sb2-based materials via band and point defect engineering

High-performance Mg3Sb2-based thermoelectrics with reduced structural disorder and microstructure evolution

Colossal Thermoelectric Enhancement in Cu2+xZn1−xSnS4 Solid Solution by Local Disordering of Crystal Lattice and Multi-Scale Defect Engineering

Electronic Orbital Alignment and Hierarchical Phonon Scattering Enabling High Thermoelectric Performance P-Type Mg3Sb2 Zintl Compounds

General design of high-performance and textured layered thermoelectric materials via stacking of mechanically exfoliated crystals

Hot Deformation Induced Defects and Performance Enhancement in FeSb2 Thermoelectric Materials

Electronic Orbital Alignment and Hierarchical Phonon Scattering Enabling High Thermoelectric Performance p-Type Mg 3 Sb 2 Zintl Compounds

Enhancing thermoelectric performance of Sb2Te3 through swapped bilayer defects

Mg Vacancy and Dislocation Strains As Strong Phonon Scatterers in Mg2Si1−xSbx Thermoelectric Materials

Point defect engineering and machinability in n-type Mg3Sb2-based materials

High Performance Mg2(Si,Sn) Solid Solutions: a Point Defect Chemistry Approach to Enhancing Thermoelectric Properties