Abstract:Objective: Active exoskeletons can handle different walking conditions, but require bulky components (e.g., motors) that need a significant source of power to do so. Purely passive exoskeletons are lightweight and energy-neutral, containing energy-recycling mechanisms that capture energy loss during negative power phases and return it as walking assistance. However, they are usually designed for stereotyped gaits (e.g., walking at fixed speed) and thus show poor adaptivity for variable conditions. This study is aimed to overcome these issues. Methods: A quasi-passive ankle exoskeleton is designed to integrate the merits of both active and passive exoskeletons, which captures the heel-strike energy loss and recycles it into propulsion. A novel, lightweight, energy-saving clutch and a heel-strike energy-storage mechanism are developed. They are coupled by a series spring that assists user's calf muscles. Six healthy subjects walked with the device on level ground and inclined surfaces to validate its functionality. Results: Level ground studies indicate that the energy-storage mechanism enhances the assistance by increasing the output torque of the exoskeleton. Reductions in metabolic cost (6.4 ± 1.3%, p < 0.05) were observed. During uphill walking, the assistance torque decreased compared with that on level ground, but it still reduced overall metabolic cost compared with baseline walking. During downhill walking, the assistance torque increased, but metabolic cost also slightly increased. Conclusion: These results demonstrate the functionality of the prototype on level ground and its limitations on inclined surfaces. Significance: The proposed device highlights the possibility of widening the potential applications of exoskeletons.

Design concept of the quasi-passive energy-efficient power-assisted lower-limb exoskeleton based on the theory of passive dynamic walking

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Simulation of Exoskeleton ZMP During Walking for Balance Control

Design and analysis of a passive exoskeleton with its hip joint energy–storage

Concept design of hybrid-actuated lower limb exoskeleton to reduce the metabolic cost of walking with heavy loads

Design and analysis of a passive knee assisted exoskeleton

Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking

Design and Implementation of a Lower Extremity Exoskeleton for Walking Assist

A Lower Limb Exoskeleton With Rigid and Soft Structure for Loaded Walking Assistance

Design and Preliminary Evaluation of A Clutch-Spring Lower Limb Exoskeleton

Design and analysis of a multi-motion self-balancing lower limb exoskeleton based on flat terrain

A Lower Extremity Exoskeleton System for Walking Assist

Design and Gait Control of an Active Lower Limb Exoskeleton for Walking Assistance

Adding compliant joints and segmented foot to bio-inspired below-knee exoskeleton

Mechanical design of a passive lower-limb exoskeleton for load-carrying assistance

Development and control of a robotic lower limb exoskeleton for paraplegic patients

Design and analysis of a novel 12-DOF self-balancing lower extremity exoskeleton for walking assistance

A Hip-driven exoskeleton for Walking Assistance based on a Clutch-type Elastic Actuator

The Development and Preliminary Test of a Powered Alternately Walking Exoskeleton with the Wheeled Foot for Paraplegic Patients

The Guilty Knowledge Test and the Modified Stroop Task in Detection of Deception: An Exploratory Study

Design of a Minimally Actuated Lower Limb Exoskeleton with Mechanical Joint Coupling