Abstract:Objective: Active exoskeletons can handle different walking conditions, but require bulky components (e.g., motors) that need a significant source of power to do so. Purely passive exoskeletons are lightweight and energy-neutral, containing energy-recycling mechanisms that capture energy loss during negative power phases and return it as walking assistance. However, they are usually designed for stereotyped gaits (e.g., walking at fixed speed) and thus show poor adaptivity for variable conditions. This study is aimed to overcome these issues. Methods: A quasi-passive ankle exoskeleton is designed to integrate the merits of both active and passive exoskeletons, which captures the heel-strike energy loss and recycles it into propulsion. A novel, lightweight, energy-saving clutch and a heel-strike energy-storage mechanism are developed. They are coupled by a series spring that assists user's calf muscles. Six healthy subjects walked with the device on level ground and inclined surfaces to validate its functionality. Results: Level ground studies indicate that the energy-storage mechanism enhances the assistance by increasing the output torque of the exoskeleton. Reductions in metabolic cost (6.4 ± 1.3%, p < 0.05) were observed. During uphill walking, the assistance torque decreased compared with that on level ground, but it still reduced overall metabolic cost compared with baseline walking. During downhill walking, the assistance torque increased, but metabolic cost also slightly increased. Conclusion: These results demonstrate the functionality of the prototype on level ground and its limitations on inclined surfaces. Significance: The proposed device highlights the possibility of widening the potential applications of exoskeletons.

Adding compliant joints and segmented foot to bio-inspired below-knee exoskeleton

Importance of Compliant Joints in Below-Knee Exoskeletons for Improving Walking

Biomechanical Design of a Novel Flexible Exoskeleton for Lower Extremities

Design of an anthropomorphic lower extremity exoskeleton with compatible joints

DEVELOPMENT OF BIOMIMETIC POWERED ANKLE-FOOT PROSTHESIS WITH COMPLIANT JOINTS AND SEGMENTED FOOT

PANTOE 1: Biomechanical Design of Powered Ankle-Foot Prosthesis with Compliant Joints and Segmented Foot

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Design of a biologically inspired lower limb exoskeleton for human gait rehabilitation

A Lower Limb Exoskeleton With Rigid and Soft Structure for Loaded Walking Assistance

Modulating Energy Among Foot-Ankle Complex With an Unpowered Exoskeleton Improves Human Walking Economy

Design and analysis of a novel 12-DOF self-balancing lower extremity exoskeleton for walking assistance

Passive dynamic walking with flat feet and ankle compliance

Preliminary Evaluation Of Gait Assistance During Treadmill Walking With A Light-Weight Bionic Knee Exoskeleton

The Study of Ankle Assisted Exoskeleton

Biofusion design and parameter optimization for a novel passive assisted knee exoskeleton robot based on eight-bar mechanism

Design and analysis of a passive exoskeleton with its hip joint energy–storage

Design and analysis of a passive knee assisted exoskeleton

Design an Underactuated Soft Exoskeleton to Sequentially Provide Knee Extension and Ankle Plantarflexion Assistance

An Adaptive Knee Joint Exoskeleton Based on Biological Geometries.

Design of a Minimally Actuated Lower Limb Exoskeleton with Mechanical Joint Coupling

Design of an Ankle Exoskeleton That Recycles Energy to Assist Propulsion During Human Walking