Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Wideband Fully Tunable Bandpass Filter Based on Flexibly Multi-Mode Tuning

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

Compact high-selectivity tunable dual-mode filter with constant bandwidth by adopting frequency-dependent S-L coupling

A Fully Tunable Filter With Wide Range Notch Frequency Tuning And Bandwidth Switchable

Ultra-Wideband Bandpass Filter with Notched Band Based on Electrooptic Phase Modulator and Phase-Shift Fiber Bragg Grating

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Low-loss tunable tri-pole band-pass filter using crossed resonator

A Triple-Mode Passband Filter With Improved Upper-Stopband Performance

Compact and Wide Stopband Bandpass Filters Based on Dual-Mode Folded Circular Substrate Integrated Waveguide Cavities

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator

Design of dual-band tunable bandpass filter with constant absolute bandwidth based on triple transmission path

Design of high selectivity tunable bandpass filter with switchable single‐/dual‐band responses

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth