Abstract:In this paper, tunable microstrip bandpass filters with two adjustable transmission poles and compensable coupling are proposed. The fundamental structure is based on a half-wavelength resonator with a center-tapped open-stub. Microwave varactors placed at various internal nodes separately adjust the filter's center frequency and bandwidth over a wide tuning range. The constant absolute bandwidth is achieved at different center frequencies by maintaining the distance between the in-band transmission poles. Meanwhile, the coupling strength could be compensable by tuning varactors that are side and embedding loaded in the parallel coupled microstrip lines (PCMLs). As a demonstrator, a second-order filter with seven tuning varactors is implemented and verified. A frequency range of 0.58-0.91 GHz with a 1-dB bandwidth tuning from 115 to 315 MHz (i. e., 12.6%-54.3% fractional bandwidth) is demonstrated. Specifically, the return loss of passbands with different operating center frequencies can be achieved with same level, i. e., about 13.1 and 11.6 dB for narrow and wide passband responses, respectively. To further verify the etch-tolerance characteristics of the proposed prototype fitler, another second-order filter with nine tuning varactors is proposed and fabricated. The measured results exhibit that the tunable fitler with the embedded varactor-loaded PCML has less sensitivity to fabrication tolerances. Meanwhile, the passband return loss can be achieved with same level of 20 dB for narrow and wide passband responses, respectively.

Low-loss tunable tri-pole band-pass filter using crossed resonator

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Tunable Bandpass Filter with Two Adjustable Transmission Poles and Compensable Coupling

Design of high selectivity tri-band bandpass filter based on triple transversal transmission path

A Low-Loss Three-Pole Frequency-Agile Bandpass Filter with Constant Absolute Bandwidth

Miniaturized Two-Pole Lumped BPF with Four Controllable TZs Using Multiple Coupling Paths

A compact and high-selectivity tri-band bandpass filter based on symmetrical stub-loaded square ring resonator

The Design for Tri-Band BandPass Filter Using OPen-LooP Resonator and Asynnetric CouPling Lines

A Ka-band Waveguide Bandpass Filter Designed by Transmission Zero Resonator Pairs (Tzrps).

Microstrip Bandpass Filter Design Using Triangular Open Loop Resonators With Improved Cross-Coupled Structure

Compact high-selectivity tunable dual-mode filter with constant bandwidth by adopting frequency-dependent S-L coupling

Tri-band bandpass filter using shorted stub-loaded dual-mode resonators

Design of a quad-band bandpass filter based on 13-mode resonator

Compact and High-Selectivity Microstrip Bandpass Filter Using Quad-Mode Resonator

Novel Tri-Band Bandpass Filter with One High Selective Tunable Passband

Low-Loss Triangular-Patch Dual-Mode Bandpass Filter with Slotted Input/Output

Microstrip Dual-Mode Triangular Patch Resonator Bandpass Filters with Two or Four Transmission Zeros

Miniaturized Tri-Band Bandpass Filter Design Using Quarter-Wavelength Shunted-Line Stepped-Impedance Resonators (slsirs) with Multi-Transmission Zeros

A Compact Tunable Bandpass Filter with High Selectivity and Low Insertion Loss Using Novel CRLH Cell

High Selective Bandpass Filter with Controllable Transmission Zeros