Abstract:To understand the influence of support materials on the reactivity of catalysts, four nickel-based catalysts supported on different materials (ZrO2, TiO2, Nb2O5, and Al2O3) were developed and investigated in the carbon nanotubes production from catalytic pyrolysis of polyethylene using two-stage fixed bed reactor. The results showed that the Ni/Al2O3 catalyst generated the highest carbon material yield of 36.5 wt%, while the order of carbon material yield was Ni/Al2O3 > Ni/TiO2 > Ni/ZrO2 > Ni/Nb2O5. To explore the correlation between catalysts properties and carbon products, the essential structural characteristics of fresh catalyst and reacted catalyst were analyzed by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (TEM), temperature program oxidation (TPO), nitrogen adsorption measure-ments and Raman spectroscopy. The Ni/Al2O3 catalyst with the highest surface area, abundant pore structure, and moderate metal-support interaction promoted the decomposition of pyrolysis volatiles to produce carbon nanomaterials, which were consist of carbon nanotubes (CNTs). CNTs are the main component of carbon ma-terials produced, accounting for a relatively high proportion. In comparison, the large metal active particles and weak metal-support interaction of Ni/TiO2 catalyst had a negative impact on the formation of CNTs, generating many fishbone like carbon nanofibers (CNFs). Moreover, the poor pore structure and larger metal active particles for Ni/ZrO2 and Ni/Nb2O5 catalyst led to a low carbon deposition yield and poor quality of CNTs. The results provide valuable data and theoretical support for the research on the preparation of valuable carbon nanotubes from waste plastics.

Preparation of Carbon Nanotube by Reacting Ch4 over Ni-Based Catalysts

PREPARATION OF HYDROGEN AND CARBON NANOTUBES via METHANE DECOMPOSITION IN FLUIDIZED-BED REACTOR

Enhanced Activation and Decomposition of CH4 by the Addition of C2H4 or C2H2 for Hydrogen and Carbon Nanotube Production

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Preparation of multi-walled carbon nanotubes using NiO catalyst synthesized by hydrothermal method

Synthesis of carbon nanotubes with Ni/CNTs catalyst

Preparation of Nanosized Iron Catalyst and Small Diameter Carbon Nanotubes from Methane Decomposition

The Effect of Hydrogen on the Formation of Nitrogen-Doped Carbon Nanotubes Via Catalytic Pyrolysis of Acetonitrile

Catalytic Vapor Decomposition of Methane over Nickle Catalyst: Growth Rate and the Corresponding Microstructures of Carbon Nanofibers

Catalytic Chemical Vapor Deposition of Methane to Carbon Nanotubes: Copper Promoted Effect of Ni/MgO Catalysts

Synthesis of Carbon Nanotubes by Catalytic Chemical Vapor Deposition over Methane Reduced Ni Catalyst

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Application of Carbon Nanotube Supported Nickel/aluminum Mixed Oxide in the Synthesis of Carbon Nanotubes

Controllable preparation of Ni nanoparticles for catalysis of coiled carbon fibers growth.

Fabrication of molybdenum carbide catalysts over multi-walled carbon nanotubes by carbothermal hydrogen reduction

Synthesis of Well-Aligned Multiwalled Carbon Nanotubes on Ni Catalyst Using Radio Frequency Plasma-Enhanced Chemical Vapor Deposition

In Situ Carbon Nanotube Synthesis by the Reduction of NiO/γ-Al2O3 Catalyst in Methane

Effects Of The Supporting Method Of The Active Constituent Of Catalyst On The Syntheses Of Carbon Nanotube Using Cvd Method

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: I. Effect of preparation conditions and Ni loading

CATALYTIC REACTION OF CO4 WITH CH4OVER NICKEL CATALYST

Synthesis Of High Quality Single-Walled Carbon Nanotubes By Cvd And Effect Of Catalyst'S Acidity-Basicity On Nanotubes Growth