Abstract:In this study, a novel magnetic cation exchange resin (MCER) was developed for highly efficient removal of heavy metal ions (HMIs). The MCER was systematically characterized by scanning electron micrograph (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Batch experiments were conducted for investigating the HMIs (Cu2+ and Ni2+) removal performance by MCER under different conditions. The HMIs removal and potential ecological risk of real electroplating wastewater were also evaluated. As revealed, the self-prepared MCER was about 80 150 gm in size with uniform grain diameter. The superior magnetic characteristics of MCER made it easily agglomerated with others and sunk quickly in aqueous solution. For both Cu2+ and Ni2+ adsorption, the adsorption processes were equilibrated within 30 min and well described by pseudo second order kinetic model and intra-particle diffusion kinetic model. Furthermore, the equilibrium adsorption data fitted the Langmuir isotherm model better than Freundlich model. Compared with MCER-1, the twice polymerized MCER-2 possessed obviously enhanced acid resistance in acidic conditions. The removal efficiencies of Cu2+ and Ni2+ onto MCER-2 increased gradually with the pH increasing from 2.0 to 4.0, and reached a plateau at pH 4.0-6.0. The MCER-2 could be efficiently regenerated by diluted HCl solution without noticeable loss of adsorption capacity after continuous adsorption/desorption cycles. For real electroplating wastewater treatment by MCER-2, the concentrations of target pollutants (Ni2+ and Cu2+) were decreased sharply and satisfied the requirements of emission standard of pollutants for electroplating, while the final wastewater was non-toxic (TUa <0.3). All these results indicated that the MCER-2 had great potential for the removal of HMIs from wastewater. (C) 2017 Published by Elsevier Ltd.

SELECTION OF ION EXCHANGE RESINS AND RECYCLE OF CITRIC SOLUTION

Study on the performance of EDI device in dealing with Ni2+solution with dilute departments filled with cation exchange resins

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

ADSORPTION RESEARCH OF HIGH CONCENTRATION NICKEL CONTAINED IN SULFATE SOLUTION BY USING CHELATING RESIN R502

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Electrokinetic removal and recycling of heavy metals from sewage sludge with citric acid complexation

Study on Iron-nickel Separation Using Ion Exchange Resins with Different Functional Groups for Potential Iron Sub-production

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

Research and application development of ion exchange resins on the separation and recovery of heavy metals

Research on optimization and efficiency of ion exchange resin for Ni2+removal

TREATMENT AND REUSE OF NICKEL PLATING RINSING WATER BY ION EXCHANGE PROCESS

High-efficient Technique to Simultaneous Removal of Cu(II), Ni(II) and Tannic Acid with Magnetic Resins: Complex Mechanism Behind Integrative Application

EFFECTIVE REMOVAL OF HEAVY METAL IONS FROM HYPERSALINE WASTEWATER BY AMINOACETIC CHELATING RESIN

Nickel Recovery from Low-Concentration Solution of Nickel Sulphate with Ion Exchange Method

Synthesis and Characterization of a Novel Magnetic Cation Exchange Resin and Its Application for Efficient Removal of Cu2+ and Ni2+ from Aqueous Solutions

Separation of Lead and Copper Ions in Acidic Media Using an Ion-Exchange Resin with a Thiourea Functional Group

The adsorption and desorption behavior and mechanism research of cobalt, nickel and copper in nitrite - sulfuric acid system

Preparation and metal ion adsorption properties of the resin containing sulfonic acid groups

Synthesis of a Novel Porous Self‐Settling Magnetic Anion Exchange Resin and its Removal Mechanism for Tannic Acid

Citric Acid Enhanced Copper Removal by a Novel Multi-amines Decorated Resin

Control for selective sorption of heavy metals cations with anion exchanger AB-17-8 by modifying the surface with citrate groups