Abstract:A series of multi-amine functionalized polymeric adsorbents with polymethacrylate-divinylbenzene as the substrate were facilely prepared for the enhanced removal and selective recovery of Cu(II) and Ni(II) from saline solutions. The optimal experiment of suspension polymerization between divinylbenzene and methylacrylate was designed by response surface methodology. The multi-amine was successfully grafted on polymethacrylate-divinylbenzene beads as evidenced by N-H deformation vibrations in Fourier-transform infrared spectrometry and characteristic absorption peaks of nitrogen in X-ray photoelectron spectroscopy. Among the newly-synthesized multi-amine adsorbents, the tetraethylenepentamine decorated resin (PAMD) exhibited the highest content of N, reaching as high as 20.38%. The maximum adsorption capacity of PAMD for Cu(II) was up to 1.21 mmol g(-1), which is obviously superior to such commercial multi-amine resins as Purolite S984. With increasing concentration of NaNO3 in the solutions, the uptake of Cu(II) and Ni(II) onto PAMD was significantly enhanced by up to 74.28% and 75.51%, respectively. It is noteworthy that the separation factor towards Cu(II) became infinite with the help of NaNO3 despite the moderate one (1160.19) in a Cu(II)/Ni(II) salt-free solution, and such interesting characteristics could be potentially applied to prepare high-purity nickel. The salt-promotion effect of PAMD was expressed by the promotion index (K-p). Furthermore, based on the model of a compressed electric double layer, the quantitative simulation of salt-enhanced adsorption was illuminated for the first time. PAMD has also been successfully applied to treat the actual saline effluent, and a greater volume of wastewater can be decontaminated by PAMD (330 BV) compared with S984 (220 BV) under the same conditions. These interesting findings suggest that PAMD could be satisfactorily applied in the advanced treatment of actual saline effluents with low-cost, high-efficiency and good-reproducibility.

EFFECTIVE REMOVAL OF HEAVY METAL IONS FROM HYPERSALINE WASTEWATER BY AMINOACETIC CHELATING RESIN

High-efficiency adsorption removal for Cu(II) and Ni(II) using a novel acylamino dihydroxamic acid chelating resin

Enhanced Removal of Cu(II) and Ni(II) from Saline Solution by Novel Dual-Primary-amine Chelating Resin Based on Anion-Synergism.

Adsorption of divalent heavy metal ions onto IDA-chelating resins: simulation of physicochemical structures and elucidation of interaction mechanisms.

REMOVAL OF COMPLEX OF Ni(Ⅱ)-AMMONIA FROM THE WASTEWATER BY D463 AND THE MECHANISM INSIGHT

Highly Selective Removal of Ni(II) from Plating Rinsing Wastewaters Containing [Ni-Xnh3-yp2o7]n Complexes Using N-chelating Resins.

A high‐efficiency adsorbent resin treated by nanosecond pulsed discharge for the removal of trace heavy metal ions in water

Highly efficient poly(6-acryloylamino-N-hydroxyhexanamide) resin for adsorption of heavy metal ions

Preparation of 6-Amino-N-Hydroxyhexanamide-Modified Porous Chelating Resin for Adsorption of Heavy Metal Ions

A novel tetraethylenepentamine functionalized polymeric adsorbent for enhanced removal and selective recovery of heavy metal ions from saline solutions

Preparation of New Hyper Cross-Linked Chelating Resin for Adsorption of Cu2+ and Ni2+ from Water

Selective Removal of Cu2+ Ion in Aqueous Solution by Poly (acrylic Acid/Acrylamide) Hydrogel

SEPARATION OF Cu(Ⅱ) AND Ni(Ⅱ) FROM AQUEOUS MEDIA BY PYRIDINE CHELATING RESIN

Removal of heavy metal ions from wastewater by a novel HEA/AMPS copolymer hydrogel: preparation, characterization, and mechanism

Efficient Removal of Hg(II) by Polymer-Supported Hydrated Metal Oxides from Aqueous Solution

Separation of Cu(II) and Ni(II) from aqueous media by pyridine chelating resin

Removal of Nickel and Cadmium Ions from Wastewater by Sorptive Flotation: Single and Binary systems

Radix Astragali residue-derived porous amino-laced double-network hydrogel for efficient Pb(II) removal: Performance and modeling

Preparation of a Novel Poly-chloromethyl Styrene Chelating Resin Containing Heterofluorenone Pendant Groups for the Removal of Cu (II), Pb (II), and Ni (II) from Wastewaters

Mechanisms of Adsorption of Heavy Metal Cations from Waters by an Amino Bio-Based Resin Derived from Rosin

Impactful modulation of micro-structures of acid-resistant picolylamine-based chelate resins for efficient separation of heavy metal cations from strongly acidic media