Abstract:A dual flat sheet supported liquid membrane (DFSSLM) system was developed based on concurrent extraction, selective separation, and recovery of three metal ions from a mixture in a single process. DFSSLM was made up of a combination of two membranes and three compartments (feed, intermediate and strip) to selectively recover not just one but three types of metal ions at the end of the system. This research aims to study the efficiency of DFSSLM in the selective extraction of cadmium(II) and copper(II) over nickel(II) ions from an aqueous mixture and electroplating waste-water. The first membrane was impregnated with 100 mM di-(2-ethylhexyl)phosphoric acid and 50 mM tributyl phosphate in kerosene, whereas the second membrane was impregnated with 99.64 mM trioctylmethylammonium chloride and 50 mM tributyl phosphate in toluene. After continuous stirring (500 rpm) in all compartments for 48 h, 98.79% of nickel(II) was recovered from the synthetic mixture in feed, 91.32% of copper(II) in intermediate, and 91.04% of cadmium(II) in strip compartment. The flux changes and kinetic studies showed cadmium(II) was preferentially transported over copper(II). The membranes (polymer and extractants) were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy with an energy-dispersive X-ray. In comparison with the treatment of real electroplating effluent, high output/input ratios were obtained for recovered cadmium(II), copper(II) and nickel(II). Most of the other heavy metals were eliminated together with the recovery of 89.09% of cadmium(II) in the strip, 90.87% of copper(II) in intermediate, and 97.61% of nickel(II) in the feed. This study concluded that DFSSLM is efficient for the separation and recovery of cadmium(II), copper(II) and nickel(II) from a complex mixture.

Removal of Nickel and Cadmium Ions from Wastewater by Sorptive Flotation: Single and Binary systems

REMOVAL OF COPPER ION FROM WASTEWATER BY FLOTATION

Removal of cadmium (II) from simulated wastewater by ion flotation technique

Efficient removal of heavy metals from aqueous solutions using ion flotation technique

Sustainable approach on removal of toxic metals from electroplating industrial wastewater using dissolved air flotation

Heavy metal removal from waste waters by ion flotation

Selective separation of cadmium(II), copper(II) and nickel(II) ions from electroplating wastewater using dual flat sheet supported liquid membrane

Removal of Copper from Industrial Wastewater by Ion Flotation with Sodium Dodecyl Sulfate as Anionic Collector

Removal of Metal Ions from Wastewater Using Co‐integrated Superparamagnetic Nanoparticles

Removal of heavy metal ions from water using ion flotation

Hybrid flotation--membrane filtration process for the removal of heavy metal ions from wastewater

Removal of Cadmium(II) from Aqueous Solution by Ion Flotation Using Rhamnolipid Biosurfactant As an Ion Collector

Ion flotation of heavy metal ions by using biodegradable biosurfactant as collector: Application and removal mechanism

EFFECTIVE REMOVAL OF HEAVY METAL IONS FROM HYPERSALINE WASTEWATER BY AMINOACETIC CHELATING RESIN

Various flotation techniques for metal ions removal

Facile adsorption-electroflotation method for the removal of heavy metal ions from water using carbon nanomaterials

Selective removal of ammonia from wastewater using Cu(II)-loaded Amberlite IR-120 resin and its catalytic application for removal of dyes

Removal of Ni(II) ions from wastewater by ion exchange resin: Process optimization using response surface methodology and ensemble machine learning techniques

Removal of hazardous ions from aqueous solutions: Current methods, with a focus on green ion flotation

Removal of heavy metal ions from wastewater: a comprehensive and critical review